CHKIT-02016

CH Vishay Sfernice 50 GHz Thin Film Microwave Resistors FEATURES • SMD wraparound or flip chip resistor • Small size, down to 20 by 16 mils • Edged trimmed block resistors • Pure alumina substrate (99.5 %) • Various terminations: • Pre-tinned over nickel barrier (wraparound or flip chip) for solder reflow • Gold pad for wire (or ribbon) bonding (one face only) • Ohmic range: 10R to 500R • Design kits available • Small internal reactance (LC down to 1 × 10-24) • Tolerance 1 %, 2 %, 5 %, 10 % • TCR: 100 ppm/°C in (- 55 °C, + 155 °C) temperature range • Compliant to RoHS directive 2002/95/EC Those miniaturized components are designed in such a way that their internal reactance is very small. When correctly mounted and utilized, they function as almost pure resistors on a very large range of frequency, up to 50 GHz. DIMENSIONS in millimeters [inches] A A D D D D C B C E (F) and (P) (N) E DIMENSIONS CASE SIZE MAX. TOL. + 0.1 [+ 0.004] MIN. TOL. - 0.1 [- 0.004] A B C D/E MAX. TOL. + 0.1 [+ 0.004] MIN. TOL. - 0.1 [- 0.004] MAX. TOL. + 0.1 [+ 0.004] MIN. TOL. - 0.1 [- 0.004] MAX. TOL. + 0.127 [+ 0.005] MIN. TOL. - 0.127 [- 0.005] MIN. 02016 preferred 0.50 [0.020] 0.39 [0.016] 0.42 [0.02] (1) 0402 preferred 1.00 [0.040] 0.6 [0.023] 0.5 [0.02] 0505 1.27 [0.050] 1.27 [0.050] 0.5 [0.02] 0603 preferred 1.52 [0.060] 0.75 [0.030] 0.5 [0.02] MAX. POWER RATING Pn mW LIMITING ELEMENT VOLTAGE V 0.1 [0.004] 0.2 [0.008] 30 30 0.15 [0.006] 0.35 [0.014] 50 37 125 50 125 50 0.25 [0.010] 0.51 [0.020] 0705/0805 1.91 [0.075] 1.27 [0.050] 0.5 [0.02] 200 50 1005 2.54 [0.100] 1.27 [0.050] 0.5 [0.02] 250 75 1206 3.06 [0.120] 1.60 [0.063] 0.5 [0.02] 330 75 0.27 [0.011] 0.53 [0.021] Note (1) + or - 0.07 mm ** Please see document “Vishay Green and Halogen-Free Definitions (5-2008)”: www.vishay.com/doc?99902 www.vishay.com 46 For technical questions, contact: sfer@vishay.com Document Number: 53014 Revision: 18-Jun-09 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice LAND PATTERN FLIP CHIP TERMINATIONS in millimeters G X Z CHIP SIZE Z X G 02016 0.3 0.5 0.2 0402 0.5 0.650 0.4 0505 0.6 1.320 0.510 0603 0.6 0.9 0.760 0705/0805 0.7 1.3 1.14 1005 0.7 1.3 1.780 1206 0.9 1.7 2.1 Note • Suggested land pattern: According to IPC-7351 WRAPAROUND TERMINATIONS in millimeters X m ax . Gmin. Zmax. CHIP SIZE Zmax. Gmin. Xmax. 0402 1.55 0.15 0.73 0505 1.82 0.10 1.40 0603 2.37 0.35 0.98 0705/0805 2.76 0.74 1.40 1005 3.39 1.37 1.40 1206 3.91 1.85 1.73 10 Ω ≤ R < 50 Ω 50 Ω ≤ R < 100 Ω 100 Ω ≤ R ≤ 500 Ω (1) 5 %, 10 % 2 %, 5 %, 10 % 1 %, 2 %, 5 %, 10 % TOLERANCE VS. OHMIC VALUES OHMIC RANGE TOLERANCE Note (1) Best tolerance for 100 Ω to 500 Ω in 02016 is 2 % Document Number: 53014 Revision: 18-Jun-09 For technical questions, contact: sfer@vishay.com www.vishay.com 47 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice PREFERRED MODELS AND VALUES Vishay/Sfernice highly recommend to use the smallest sizes and flip chip version to get the best performances. Recommended sizes: CH02016/CH0402/CH0603 Recommended terminations: F Recommended Values: 10R/18R/25R/50R/75R/100R/150R/180R/200R/250R/330R/500R Those values are available with a MOQ of 100 pieces. Other values can be ordered upon request, but higher MOQ will apply: 1000 pieces for CH02016, 500 pieces for CH0402, 250 pieces for CH0505/CH0603/CH0705/CH0805/CH1005 and 100 pieces for CH1206. Design kits are available Ex Stock in CH02016 and CH0402 sizes. There are 20 pieces per recommended value. F termination. 5 % tolerance. Those kits are packaged in pieces of tape and delivered in ESD bags. PACKAGING Standard packaging is waffle pack for sizes as of 0402 and paper tape for size 02016. Plastic tape and reel is available for other sizes (low conductivity) or paper tape under request. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CH0402-50RJF (preferred part number format) C H 0 4 0 2 - 5 0 R J F T GLOBAL MODEL SIZE OHMIC VALUE TOLERANCE TERMINATION (1) PACKAGING (2) CH 02016 0402 0505 0603 0805 1005 1206 10R to 500R F=1% G=2% J=5% K = 10 % F (Flip Chip): SnAg over nickel barrier N (W/A): SnAg over nickel barrier (except 02016) P (one face): (3) Gold bonding pads T = Tape and reel PT = Paper tape Leave blank for waffle pack Historical Part Number example: CH 0402 50R 5 % P e2 (will continue to be accepted) CH 0402 50R 5% P e2 HISTORICAL MODEL SIZE OHMIC VALUE TOLERANCE TERMINATION LEAD (Pb)-FREE VERSION e2: Tin/silver e4: Gold Global Part Number Ordering design kits: CHKIT-02016 CHKIT-0402 Notes (1) 02016 Not available with N termination (2) 02016 Paper tape only available (3) Gold termination for application in hermetic package www.vishay.com 48 For technical questions, contact: sfer@vishay.com Document Number: 53014 Revision: 18-Jun-09 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL C Lc R L Lc Cg Cg The complex impedance of the chip resistor is given by the following equations: Z=R 1 + j XL/R 1 + j R/XC θ = Arc tg with XL = 2πfL: Reactance of the internal inductance XL (XC + XL) + R2 with Xc = I/2πfC: Reactance of the R XC internal capacitance C: Internal shunt capacitance L: Internal inductance R: Resistance Lc: External connection inductance Cg: External capacitance to ground The resistor is purely resistive when R = (L/C)1/2 = Zo. The smaller the LC product the greater the frequency range over which the resistor looks approximately resistive. This can be seen on the graphs relevant to 02016 (R = 100 Ω, LC = 1 x 10-24), 0402 (R = 129 Ω, LC = 15 x 10-24) and 1206 (R = 200 Ω, LC = 100 x 10-24). Note 1 + (XL/R)2 [Z] = R 1 + (R/XC)2 1/2 • The external reactance (Lc and Cg) depends on the PCB material, f = Frequency the layout and assembly technology. It does affect the HF performance and needs to be estimated. The external reactance can be utilized to compensate the internal one. INTERNAL IMPEDANCE CURVE FOR 02016 SIZE 2.0 1.8 10 Ω C = 0.01 pF L = 0.1 nH 25 Ω 1.6 1.4 IZI/R 1.2 50 Ω 75 Ω 100 Ω 150 Ω 200 Ω 250 Ω 1.0 0.8 0.6 500 Ω 0.4 1000 Ω 0.2 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) Document Number: 53014 Revision: 18-Jun-09 For technical questions, contact: sfer@vishay.com www.vishay.com 49 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice INTERNAL IMPEDANCE CURVE FOR 0402 SIZE 2.0 1.8 10 Ω 25 Ω 75 Ω 50 Ω C = 0.03 pF L = 0.5 nH 1.6 1.4 100 Ω IZI/R 1.2 1.0 129 Ω 0.8 150 Ω 0.6 200 Ω 250 Ω 0.4 500 Ω 1000 Ω 0.2 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor N termination (wraparound) 2.0 1.8 10 Ω 25 Ω C = 0.01 pF L = 0.2 nH 50 Ω 1.6 1.4 75 Ω IZI/R 1.2 100 Ω 129 Ω 150 Ω 200 Ω 250 Ω 1.0 0.8 0.6 500 Ω 0.4 1000 Ω 0.2 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) www.vishay.com 50 For technical questions, contact: sfer@vishay.com Document Number: 53014 Revision: 18-Jun-09 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice INTERNAL IMPEDANCE CURVE FOR 0603/0505 SIZE 2.0 1.8 10 Ω 50 Ω 25 Ω C = 0.05 pF L = 0.4 nH 1.6 1.4 75 Ω IZI/R 1.2 89 Ω 1.0 100 Ω 0.8 0.6 150 Ω 0.4 200 Ω 250 Ω 0.2 500 Ω 1000 Ω 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor N termination (wraparound) 2.0 1.8 10 Ω 25 Ω 50 Ω C = 0.01 pF L = 0.3 nH 1.6 75 Ω 1.4 100 Ω IZI/R 1.2 150 Ω 173 Ω 200 Ω 250 Ω 1.0 0.8 0.6 500 Ω 0.4 1000 Ω 0.2 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) Document Number: 53014 Revision: 18-Jun-09 For technical questions, contact: sfer@vishay.com www.vishay.com 51 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice INTERNAL IMPEDANCE CURVE FOR 0805 SIZE 2.0 1.8 10 Ω 50 Ω 25 Ω 75 Ω C = 0.05 pF L = 1 nH 100 Ω 1.6 1.4 IZI/R 1.2 141 Ω 150 Ω 1.0 0.8 0.6 200 Ω 0.4 250 Ω 0.2 500 Ω 1000 Ω 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor N termination (wraparound) 2.0 1.8 10 Ω 25 Ω 50 Ω 75 Ω C = 0.02 pF L = 0.5 nH 1.6 100 Ω 1.4 IZI/R 1.2 1.0 150 Ω 158 Ω 0.8 200 Ω 0.6 250 Ω 0.4 500 Ω 0.2 0 0.1 1000 Ω 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) www.vishay.com 52 For technical questions, contact: sfer@vishay.com Document Number: 53014 Revision: 18-Jun-09 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice INTERNAL IMPEDANCE CURVE FOR 1005 SIZE 2.0 1.8 10 Ω 25 Ω 50 Ω 75 Ω 100 Ω C = 0.05 pF L = 1.5 nH 1.6 1.4 150 Ω IZI/R 1.2 1.0 173 Ω 0.8 200 Ω 0.6 250 Ω 0.4 0.2 500 Ω 1000 Ω 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor N termination (wraparound) 2.0 1.8 10 Ω 25 Ω 50 Ω 75 Ω 100 Ω C = 0.02 pF L = 0.7 nH 1.6 1.4 150 Ω IZI/R 1.2 187 Ω 200 Ω 1.0 0.8 250 Ω 0.6 0.4 500 Ω 0.2 0 0.1 1000 Ω 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) Document Number: 53014 Revision: 18-Jun-09 For technical questions, contact: sfer@vishay.com www.vishay.com 53 CH 50 GHz Thin Film Microwave Resistors Vishay Sfernice INTERNAL IMPEDANCE CURVE FOR 1206 SIZE 2.0 1.8 10 Ω 25 Ω 50 Ω 75 Ω 100 Ω C = 0.05 pF L = 2 nH 150 Ω 1.6 1.4 IZI/R 1.2 200 Ω 1.0 0.8 250 Ω 0.6 0.4 500 Ω 0.2 1000 Ω 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor N termination (wraparound) 2.0 1.8 10 Ω 25 Ω 50 Ω 75 Ω 100 Ω C = 0.03 pF L = 1 nH 1.6 1.4 150 Ω IZI/R 1.2 1.0 200 Ω 0.8 250 Ω 0.6 0.4 500 Ω 0.2 1000 Ω 0 0.1 1 10 100 f (GHz) Impedance as a function of frequency for a chip resistor (F and P terminations) www.vishay.com 54 For technical questions, contact: sfer@vishay.com Document Number: 53014 Revision: 18-Jun-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1