CHPHT
www.vishay.com
Vishay Sfernice
High Temperature (245 °C) Thick Film Chip Resistor
FEATURES
• High temperature (245 °C)
• Large ohmic value range 0.1 Ω to 100 MΩ
Available
• Operating temperature range
(-55 °C to +230 °C)
• SMD wraparound chip resistor
• Storage temperature range (-55 °C to +245 °C)
• Gold terminations for HMP process (< 1 μm thick) for
temperature up to 245 °C
• Tin / silver terminations for operating temperature up to
200 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe
conditions (temperature as high as 230 °C powered or up to 245 °C un-powered) has leaded Vishay Sfernice to push out
the limit of the thick film technology. Designers might read the application note “Power Dissipation Considerations in
High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)”
(www.vishay.com/doc?53047) in conjunction with this data sheet to help them to properly design their PCBs and get the best
performances of the CHPHT. Vishay Sfernice R&D engineers will be willing to support any customer design considerations.
DIMENSIONS in millimeters
D
C
B
E
A
A
B
C
D
E
± 0.152
± 0.127
± 0.127
± 0.127
± 0.127
0603
1.60
0.90
0.38
0.31
0.40
0805
1.85
1.25
0.38
0.31
0.50
1206
3.00
1.73
0.38
0.40
0.50
2010
5.03
2.64
0.50
0.50
0.50
CASE SIZE
SUGGESTED LAND PATTERN (to IPC-7351A)
Gmin.
Xmax.
Zmax.
CASE SIZE
Zmax.
Gmin.
Xmax.
0603
2.15
0.39
1.03
0805
2.70
0.44
1.38
1206
3.85
1.59
1.85
2010
5.88
3.62
2.77
Revision: 12-Oct-2022
Document Number: 52032
1
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
www.vishay.com
Vishay Sfernice
STANDARD ELECTRICAL SPECIFICATIONS
RATED
POWER
Pn
W
(at 230 °C)
LIMITING
ELEMENT
VOLTAGE
V
MAX.
OVERLOAD
VOLTAGE
V
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
0.0125
50
100
1, 2, 5
100, 200
MODEL
SIZE
RESISTANCE
RANGE
Ω
CHPHT
0603
0.1 to 25M
CHPHT
0805
0.1 to 25M
0.02
150
300
1, 2, 5
100, 200
CHPHT
1206
0.1 to 50M
0.025
200
400
1, 2, 5
100, 200
CHPHT
2010
0.1 to 100M
0.1
200
400
1, 2, 5
100, 200
PACKAGING
CLIMATIC SPECIFICATIONS
Operating temperature range
-55 °C to +230 °C
Storage temperature range
-55 °C to +245 °C
ESD packaging available: Waffle pack and plastic tape and
reel (low conductivity). Paper tapes available on request
(ESD only). (For 0603, 0805, and 1206 only.)
MECHANICAL SPECIFICATIONS
Substrate
NUMBER OF PIECES PER PACKAGE
SIZE
Alumina
Technology
Thick film (Ruthenium oxyde)
Protection
0.5 Ω < R < 100 MΩ:
double organic coating
R ≤ 0.5 Ω: overglaze protection
(no organic coating)
N (W/A): SnAg over nickel
barrier for temperature
up to 200 °C
G (W/A) type: gold (< 1 μm) over
nickel barrier for temperature
up to 245 °C
Terminations
Note
• Refer to Application Note “Guidelines for Vishay Sfernice
Resistive and Inductive Components” (document number:
52029) for recommended reflow profile. Profile #3 applies
BEST TOL. AND TCR VERSUS OHMIC VALUE
OHMIC VALUE
RANGE (Ω)
TIGHTEST
TOLERANCE (%)
BEST TCR
(ppm/°C)
5 ≤ R ≤ 10M
1 (F)
100 (K)
1 ≤ R ≤ Rmax.
2 (G)
200 (L)
0.5 ≤ R ≤ Rmax.
5 (J)
200 (L)
0.1 ≤ R ≤ Rmax.
5 (J)
300 (M)
TAPE AND REEL
MIN.
0603
TAPE
WIDTH
MAX.
5000
100
0805
100
1206
140
2010
60
4000
8 mm
2000
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code
POWER DERATING CURVE
Rated Power (%)
WAFFLE
PACK
1200
1000
800
600
400
200
0
0
50
100
150
200
250
300
Ambient Temperature in °C
Revision: 12-Oct-2022
Document Number: 52032
2
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
www.vishay.com
Vishay Sfernice
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heat
sinks (see application note: “Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film” (www.vishay.com/doc?53048).
Option to order: 0063 (applies to size 1206/2010).
DIMENSIONS (Option 0063) in millimeters
Bottom view for mounting
Uncoated
ceramic
A
Enlarged
termination
B
F
D
E
A
B
E
D
MAX. TOL.
+0.152
MIN. TOL.
-0.152
MAX. TOL.
+0.127
MIN. TOL.
-0.127
MAX. TOL.
+0.13
MIN. TOL.
-0.13
MAX. TOL.
+0.13
MIN. TOL.
-0.13
NOMINAL
NOMINAL
NOMINAL
NOMINAL
NOMINAL
MIN.
MAX.
1206
3.06 (0.120)
1.60 (0.063)
0.40 (0.016)
1.22 (0.048)
0.63 (0.024)
0.50 (0.020)
0.76 (0.030)
2010
5.08 (0.200)
2.54 (0.100)
0.48 (0.019)
2.23 (0.088)
0.63 (0.024)
0.50 (0.020)
0.76 (0.030)
CASE
SIZE
F
SUGGESTED LAND PATTERN (Option 0063)
Gmin.
Xmax.
Zmax.
DIMENSIONS (in millimeters)
CHIP SIZE
Zmax.
Gmin.
Xmax.
1206
3.91 (0.154)
0.50 (0.020)
1.73 (0.068)
2010
5.93 (0.233)
0.50 (0.020)
2.67 (0.105)
Revision: 12-Oct-2022
Document Number: 52032
3
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
www.vishay.com
Vishay Sfernice
PERFORMANCE
TESTS
CONDITIONS
REQUIREMENTS
TYPICAL VALUES
AND DRIFTS
5N for 10 s
± (0.25 % + 0.05 Ω)
< ± 0.1 %
Resistance to solder heat
Immersion 10 s
in Sn/Pb 60/40
at +260 °C
± (0.25 % + 0.05 Ω)
< ± 0.1 %
Rapid temperature change
5 cycles
-55 °C to +155 °C
± (0.25 % + 0.05 Ω)
< ± 0.1 %
Phase A dry heat
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± (1 % + 0.05 Ω)
< ± 0.2 %
Termination adhesion
Climatic sequence
56 days
± (1 % + 0.05 Ω)
< ± 0.2 %
Moisture resistance
AEC-Q200
85 °C / 85 % RH / Pn
1000 h
3 % + 0.05 Ω
Max. < 3 % + 0.05 Ω
Short time overload
6.25 Pn
for 2 s
± (0.25 % + 0.05 Ω)
< ± 0.1 %
Load life
1000 h at rated power
at 230 °C
-
1 % max.
Shelf life
1000 h at 245 °C
-
1 % max.
Humidity (steady state)
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: CHPHT0805K1001FGT
C
GLOBAL
MODEL
CHPHT
H
P
H
T
0
8
0
5
K
1
0
0
1
F
G
T
SIZE
TCR
VALUE
TOLERANCE
TERMINATION (1)
PACKAGING
OPTION
0603
0805
1206
2010
K = 100 ppm
L = 200 ppm
M = 300 ppm
The first 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
R designates
decimal point
F=±1%
G=±2%
J=±5%
N: SnAg over nickel barrier
G: gold over nickel barrier
For more
information see
“Codification of
Packaging”
table
Leave blank
if no option
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
Note
(1) N terminations for temperature up to 200 °C
G terminations for temperature up to 230 °C
Revision: 12-Oct-2022
Document Number: 52032
4
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHPHT
www.vishay.com
Vishay Sfernice
CODIFICATION OF PACKAGING
WAFFLE PACK
W
100 min., 1 mult.
WA
100 min., 100 mult. (available only in size 1206)
PLASTIC TAPE (Standard for all sizes)
T
100 min., 1 mult.
TA
100 min., 100 mult.
TB
250 min., 250 mult.
TC
500 min., 500 mult.
TD
1000 min., 1000 mult.
TE
2500 min., 2500 mult.
TF
Full tape (quantity depending on size of chips)
PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes)
PT
100 min., 1 mult.
PA
100 min., 100 mult.
PB
250 min., 250 mult.
PC
500 min., 500 mult.
PD
1000 min., 1000 mult.
PE
2500 min., 2500 mult.
PF
Full tape (quantity depending on size of chips)
CODIFICATION OF OPTIONS ON TWO DIGITS
OPTION
OPTION 2
DIGITS
OPTION
OPTION 2
DIGITS
CODIFICATION OF SIZES
CODE 18
CODE 40
CODE 18
CODE 40
7
02016
M
22
1A
8
0302
N
33
0127
1B
9
0402
O
44
0128
1C
A
0502
P
55
..
B
0505
Q
515
0320
8M
C
0603
R
48
0321
8N
D
0805
S
408
0E
0322
8O
E
1005
T
816
0F
0323
8P
F
1010
U
914
..
0324
8Q
G
1020
V
073
0124
0Y
0325
8R
H
1206
W
074
0125
0Z
..
..
I
1505
X
100
J
2010
Y
135
K
2208
Z
182
L
2512
..
..
0126
0099
99
0100
0A
0101
0B
..
0102
0C
0103
0D
0104
0105
..
Revision: 12-Oct-2022
Document Number: 52032
5
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000