CNY117
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output,
with Base Connection, 110 °C Rated
FEATURES
• Operating temperature from -55 °C to +110 °C
• Breakdown voltage, 5000 VRMS
A
1
6 B
C
2
5 C
• Industry standard dual-in-line package
NC
3
4 E
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
• Long term stability
APPLICATIONS
• AC adapter
• SMPS
i179004-14
• PLC
DESCRIPTION
• Factory automation
The CNY117 is a 110 °C rated optocoupler consisting of a
gallium arsenide infrared emitting diode optically coupled to
a silicon planar phototransistor detector in a plastic plug-in
DIP-6 package.
• Game consoles
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY117. This model number should be
used when consulting safety agency documents.
The coupling device is suitable for signal transmission
between two electrically separated circuits. The potential
difference between the circuits to be coupled is not allowed
to exceed the maximum permissible reference voltages.
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI: EN 60065, EN 60950-1
• CQC GB8898-2011
ORDERING INFORMATION
C
N
Y
1
1
7
-
PART NUMBER
#
CTR
BIN
X
0
#
PACKAGE OPTION
#
DIP-6
Option 6
7.62 mm
10.16 mm
T
TAPE
AND
REEL
Option 7
> 8 mm
AGENCY CERTIFIED/PACKAGE
UL, cUL, BSI
CTR (%)
40 to 80
63 to 125
100 to 200
CNY117-1
CNY117-2
CNY117-3
CNY117-4
DIP-6, 400 mil, option 6
CNY117-1X006
CNY117-2X006
CNY117-3X006
CNY117-4X006
SMD-6, option 7
CNY117-1X007T
CNY117-2X007T
CNY117-3X007T
CNY117-4X007T
40 to 80
63 to 125
100 to 200
160 to 320
CNY117-1X001
CNY117-2X001
CNY117-3X001
CNY117-4X001
DIP-6
VDE, UL, cUL, BSI
DIP-6
160 to 320
DIP-6, 400 mil, option 6
CNY117-1X016
CNY117-2X016
CNY117-3X016
CNY117-4X016
SMD-6, option 7
CNY117-1X017T
CNY117-2X017T
CNY117-3X017T
CNY117-4X017T
Note
• Additional options may be possible, please contact sales office.
Rev. 1.9, 08-Jan-14
Document Number: 83876
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Reverse voltage
VR
6.0
V
DC forward current
IF
60
mA
INPUT
t ≤ 10 μs
Surge forward current
Power dissipation
IFSM
2.5
A
Pdiss
100
mW
BVCEO
70
V
IC
50
mA
ICM
100
mA
Pdiss
150
mW
VISO
5000
VRMS
Tstg
-55 to +150
°C
Tamb
-55 to +110
°C
Tsld
260
°C
Pdiss
250
mW
OUTPUT
Collector emitter breakdown voltage
Collector current
tp/T = 0.5, tp ≤ 10 ms
Collector peak current
Output power dissipation
COUPLER
Isolation test voltage
between emitter and detector referred to
standard climate 23/50 DIN 50014
t = 1 min
Storage temperature range
Ambient temperature range
Soldering temperature (1)
2 mm from case, ≤ 10 s
Total power dissipation
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
1.39
1.65
V
10
μA
INPUT
Forward voltage
IF = 60 mA
VF
Breakdown voltage
IR = 10 μA
VBR
VR = 6 V
IR
0.01
VR = 0 V, f = 1 MHz
CO
25
pF
Reverse current
Capacitance
6
V
OUTPUT
Collector emitter capacitance
VCE = 5 V, f = 1 MHz
CCE
5.2
pF
Base collector capacitance
VCE = 5 V, f = 1 MHz
CBC
6.5
pF
Emitter base capacitance
VCE = 5 V, f = 1 MHz
CEB
7.5
pF
IF = 10 mA, IC = 2.5 mA
VCEsat
0.25
CC
0.6
COUPLER
Collector emitter, saturation voltage
Coupling capacitance
Collector emitter, leakage current
VCE = 10 V
0.4
V
pF
CNY117-1
ICEO
2.0
50
nA
CNY117-2
ICEO
2.0
50
nA
CNY117-3
ICEO
5.0
100
nA
CNY117-4
ICEO
5.0
100
nA
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Rev. 1.9, 08-Jan-14
Document Number: 83876
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
Vishay Semiconductors
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
IF = 10 mA
Current transfer ratio
IF = 1.0 mA
PART
SYMBOL
MIN.
MAX.
UNIT
CNY117-1
CTR
40
TYP.
80
%
CNY117-2
CTR
63
125
%
CNY117-3
CTR
100
200
%
CNY117-4
CTR
160
320
CNY117-1
CTR
13
30
%
CNY117-2
CTR
22
45
%
CNY117-3
CTR
34
70
%
CNY117-4
CTR
56
90
%
%
Note
• Current transfer ratio IC/IF at VCE = 5.0 V, 25 °C and collector emitter leakage current by dash number.
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
LINEAR OPERATION (without saturation)
Turn-on time
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
ton
3.0
μs
Rise time
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
tr
2.0
μs
Turn-off time
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
toff
2.3
μs
Fall time
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
tf
2.0
μs
Cut-off frequency
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
fCO
110
kHz
SWITCHING OPERATION (with saturation)
IF = 20 mA
Turn-on time
Rise time
Turn-off time
Fall time
CNY117-1
ton
3.0
μs
CNY117-2
ton
4.2
μs
CNY117-3
ton
4.2
μs
IF = 5.0 mA
CNY117-4
ton
6.0
μs
IF = 20 mA
CNY117-1
tr
2.0
μs
CNY117-2
tr
3.0
μs
CNY117-3
tr
3.0
μs
IF = 10 mA
IF = 10 mA
IF = 5.0 mA
CNY117-4
tr
4.6
μs
IF = 20 mA
CNY117-1
toff
18
μs
CNY117-2
toff
23
μs
CNY117-3
toff
23
μs
IF = 5.0 mA
CNY117-4
toff
25
μs
IF = 20 mA
CNY117-1
tf
11
μs
CNY117-2
tf
14
μs
CNY117-3
tf
14
μs
CNY117-4
tf
15
μs
IF = 10 mA
IF = 10 mA
IF = 5.0 mA
Rev. 1.9, 08-Jan-14
Document Number: 83876
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
IF
Vishay Semiconductors
+5V
IF
IF
0
0
tp
IC
R G = 50 Ω
tp
= 0.01
T
t
100 %
90 %
t p = 50 µs
Channel I
Oscilloscope
R L = 1 MΩ
C L = 20 pF
Channel II
50 Ω
10 %
0
tr
RL
td
ts
t on
95 10804-3
Fig. 1 - Test Circuit, Non-Saturated Operation
IF
+5V
I F = 10 mA
0
tp
td
tr
t on (= td + tr)
tf
t off
ts
tf
t off (= ts + tf)
Pulse duration
Delay time
Rise time
Turn-on time
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 3 - Switching Times
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 2 - Test Circuit, Saturated Operation
SAFETY AND INSULATION RATINGS
PARAMETER
SYMBOL
VALUE
UNIT
Output safety power
PSO
700
mW
Input safety current
ISI
400
mA
Safety temperature
TSI
175
°C
Comparative tracking index
CTI
175
MAXIMUM SAFETY RATINGS
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
VISO
5000
Maximum transient isolation voltage
VIOTM
8000
Vpeak
Maximum repetitive peak isolation voltage
VIORM
890
Vpeak
VRMS
Insulation resistance
Tamb = 25 °C, VDC = 500 V
RIO
≥ 1012
Ω
Isolation resistance
Tamb = 100 °C, VDC = 500 V
RIO
≥ 1011
Ω
Climatic classification (according to IEC 68 part 1)
55/115/21
Environment (pollution degree in accordance to DIN VDE 0109)
Creepage distance
Clearance distance
Insulation thickness
2
Standard DIP-4
≥7
mm
SMD
≥7
mm
Standard DIP-4
≥8
mm
SMD
≥8
mm
≥ 0.4
mm
DTI
Note
• As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
Rev. 1.9, 08-Jan-14
Document Number: 83876
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
Vishay Semiconductors
1.8
1.7
Tamb = 25 °C
1.6
Tamb = 0 °C
1.5
1.4
Tamb = - 25 °C
1.3 T = - 55 °C
amb
1.2
1.1
Tamb = 50 °C
1.0
Tamb = 75 °C
0.9
Tamb = 100 °C
0.8
0.7
Tamb = 110 °C
0.6
0.1
1
10
100
10 000
IF = 0 mA
ICE0 - Leakage Current (nA)
VF - Forward Voltage (V)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
100
VCE = 24 V
10
VCE = 12 V
1
0.1
0.01
0.001
- 60 - 40 - 20 0
20
40
60
80 100 120
IF - Forward Current (mA)
Tamb - Ambient Temperature (°C)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 7 - Leakage Current vs. Ambient Temperature
60
1.2
CTRNorm - Normalized CTR (NS)
IC - Collector Current (mA)
VCE = 40 V
IF = 30 mA
50
40
IF = 20 mA
30
IF = 15 mA
20
IF = 10 mA
10
IF = 5 mA
0
0
1
2
3
4
5
7
6
0.8
0.6
0.4
0.2
0
-60 -40 -20
8
VCE = 5 V
IF = 10 mA
1.0
0
20
40
60
80 100 120
VCE - Collector Emitter Voltage (NS) (V)
Tamb - Ambient Temperature (°C)
Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 8 - Normalized CTR (NS) vs. Ambient Temperature
25
IC - Collector Current (mA)
20
15
IF = 10 mA
10
IF = 5 mA
5
IF = 1 mA
IF = 2 mA
0
0.1
0
0.2
0.3
0.4
CTRNorm - Normalized CTR (sat)
1.2
IF = 25 mA
VCE = 0.4 V
IF = 10 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
0
20
40
60
80 100 120
VCE - Collector Emitter Voltage (sat) (V)
Tamb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat)
Fig. 9 - Normalized CTR (sat) vs. Ambient Temperature
Rev. 1.9, 08-Jan-14
Document Number: 83876
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
1000
1.2
IF = 10 mA
VCE = 5 V
fCTR - -3 dB Frequency (kHz)
CTRNorm - Normalized CTR (NS)
Vishay Semiconductors
Tamb = 25 °C
1.0
Tamb = 0 °C
0.8
Tamb = - 40 °C
Tamb = - 55 °C
0.6
Tamb = 50 °C
Tamb = 75 °C
0.4
Tamb = 100 °C
0.2
VCC = 5 V
100
10
Tamb = 110 °C
0
0.1
1
1
0.1
100
10
1
10
100
IF - Forward Current (mA)
IC - Collector Current (mA)
Fig. 10 - Normalized CTR (NS) vs. Forward Current
Fig. 13 - CTR -3 dB Frequency vs. Collector Current
1000
IF = 10 mA
VCE = 0.4 V
VCE = 5 V, IF = 10 mA
ton, toff - Switching Time (μs)
CTRNorm - Normalized CTR (sat)
1.2
Tamb = 25 °C
1.0
Tamb = 0 °C
Tamb = - 40 °C
0.8
Tamb = - 55 °C
0.6
Tamb = 50 °C
0.4
Tamb = 75 °C
Tamb = 100 °C
0.2
toff
100
10
ton
1
Tamb = 110 °C
0
0.1
1
10
100
0.1
0.1
1
10
100
IF - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 11 - Normalized CTR (sat) vs. Forward Current
Fig. 14 - Switching Time vs. Load Resistance
0
VCE = 5 V
- 20
Phase (deg)
- 40
- 60
- 80
- 100
- 120
- 140
- 160
1
10
100
1000
f - Frequency (kHz)
Fig. 12 - CTR Frequency vs. Phase Angle
Rev. 1.9, 08-Jan-14
Document Number: 83876
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
6
5
4
6.5 ± 0.5
1
2
3
7.3 ± 0.5
7.62 ± 0.3
1.1 ± 0.1
3.5 ± 0.3
0.5 typ.
3.3 ± 0.5
2.8 ± 0.5
0.26
0.5 ± 0.1
2.54 ± 0.25
7.62 to 9.98
22530
Option 6
Option 7
7.62 typ.
7.62 typ.
3.5 ± 0.3
3.5 ± 0.3
0.35 ± 0.25
0.1 min.
0.6 min.
8 min.
2.7 min.
10.16 typ.
10.3 max.
0.76
R 0.25
2.54
1.78
8 min.
11.05
20802-35
1.52
PACKAGE MARKING (Example of CNY117-3X017T)
CNY117-3
Pin 1 I.D.
V YWW 25
Notes
• VDE logo is only marked on option 1 parts. Option information is not marked on the part.
• Tape and reel suffix (T) is not part of the package marking.
Rev. 1.9, 08-Jan-14
Document Number: 83876
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
www.vishay.com
Vishay Semiconductors
TUBE AND TAPE INFORMATION
DEVICES PER TUBE
TYPE
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-6
50
40
2000
Ø 1.55 ± 0.05
2 ± 0.1
4 ± 0.1
1.75 ± 0.1
7.5 ± 0.1
16 ± 0.3
12 ± 0.1
0.3 ± 0.05
22537-1
Fig. 15 - Tape and Reel Drawing, 1000 Units per Reel
Rev. 1.9, 08-Jan-14
Document Number: 83876
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000