CPCC0324R00JE32

CPCL, CPCC, CPCP, CPCF www.vishay.com Vishay Dale Wirewound / Metal Film Resistors, Commercial Power, Vertical Mount FEATURES • Board space saving due to vertical design • Meets or exceeds requirements of EIA standard RS-344 • High power to size ratio • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available Available Available Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P70 °C W RESISTANCE RANGE  TOLERANCE ±% WEIGHT (typical) g CPCL02 CPCL-2 2 0.01 to 0.10 5, 10 3.5 CPCC02 CPCC-2 2 0.1 to 500 5, 10 3.5 CPCP02 CPCP-2 2 0.1 to 4K 1, 5 3.5 CPCF02 CPCF-2 2 501 to 150K 1, 5, 10 3.5 CPCL03 CPCL-3 3 0.01 to 0.10 5, 10 5.5 CPCC03 CPCC-3 3 0.1 to 800 5, 10 5.5 CPCP03 CPCP-3 3 0.1 to 5K 1, 5 5.5 CPCF03 CPCF-3 3 801 to 150K 1, 5, 10 5.5 CPCL05 CPCL-5 5 0.01 to 0.10 5, 10 6.9 CPCC05 CPCC-5 5 0.1 to 800 5, 10 6.9 CPCP05 CPCP-5 5 0.1 to 5K 1, 5 6.9 CPCF05 CPCF-5 5 801 to 150K 1, 5, 10 6.9 14.3 CPCL10 CPCL-10 10 0.01 to 0.10 5, 10 CPCC10 CPCC-10 10 0.1 to 1.5K 5, 10 14.3 CPCP10 CPCP-10 10 0.1 to 8K 1, 5 14.3 Note • Non-inductively wound types are available on the CPCP series signified by a 1 in the special character on part number such as CPCP0510R00FB321. Maximum resistance value will be ½ of the standard CPCP TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient UNIT ppm/°C CPCLxx CPCCxx ± 100 = 0.05  to 0.1  ± 300 = 1.0  and above, ± 400 = 0.01  to 0.049  ± 600 = 0.1  to 0.99 , CPCPxx CPCFxx ± 20 = 10  and above, ± 50 = 1.0  to 9.9  ± 90 = 0.1  to 0.99  ± 50 all values Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C Terminal Strength lb 10 minimum VAC 1000 Dielectric Withstanding Voltage Revision: 29-Sep-2020 -65 to +275 -65 to +225 Document Number: 30218 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPCL, CPCC, CPCP, CPCF www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CPCC0515R00JB32 C P C C 0 5 1 5 R 0 0 J B 3 2 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical Specifications Global Model column for options) R = decimal K = thousand R1500 = 0.15  1K500 = 1500  F = ± 1.0 % H = ± 3.0 % J = ± 5.0 % K = ± 10.0 % E32 = lead (Pb)-free two layer bulk E01 = lead (Pb)-free skin pack (Dash number) (up to 3 digits) From 1 to 999 as applicable B32 = tin / lead two layer bulk J01 = tin / lead skin pack Historical Part Numbering Example: CPCC-5 15  5 % B32 CPCC-5 15  5% B32 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING DIMENSIONS in inches [millimeters] C E + 0.078 0.177 - 0.039 1.98 [4.50 +- 0.991 ] B A D DIMENSIONS in inches [millimeters] A ± 0.031 [0.794] B ± 0.031 [0.794] C + 0.043 [1.09] - 0.012 [0.305] D ± 0.005 [0.127] E ± 0.040 [1.02] CPCL02, CPCC02 CPCP02, CPCF02 0.807 [20.50] 0.433 [11.00] 0.276 [7.01] 0.032 [0.813] 0.197 [5.00] CPCL03, CPCC03 CPCP03, CPCF03 0.984 [24.99] 0.472 [11.99] 0.315 [8.00] 0.032 [0.813] 0.197 [5.00] CPCL05, CPCC05 CPCP05, CPCF05 1.003 [25.48] 0.512 [13.00] 0.354 [8.99] 0.032 [0.813] 0.197 [5.00] 1.372 [34.85] 0.633 [16.08] 0.485 [12.32] GLOBAL MODEL CPCL10, CPCP10 CPCC10 0.040 [1.02] 0.036 [0.914] 0.290 [7.37] MATERIAL SPECIFICATIONS Part Marking: DALE, model, wattage, value, tolerance, date code CPCP: Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value CPCL: Element: self-supporting copper-nickel alloy or nickel-chrome alloy, depending on resistance value Body: steatite ceramic case with inorganic potting compound Terminals: tinned copper Core: ceramic Body: steatite ceramic case with inorganic potting compound End Caps: stainless steel Terminals: tinned Copperweld® CPCC: Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Woven fiberglass Body: steatite ceramic case with inorganic potting compound End Caps: tin plated steel Terminals: tinned copper Revision: 29-Sep-2020 CPCF: Element: metal film - nickel-chrome alloy Core: Alumina ceramic Body: steatite ceramic case with inorganic potting compound End Caps: brass alloy Terminals: solder-coated copper Document Number: 30218 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPCL, CPCC, CPCP, CPCF www.vishay.com Vishay Dale RATED POWER IN % DERATING 120 100 CPCL CPCC CPCP 80 60 40 CPCF 20 0 - 65 - 25 25 75 70 125 175 225 275 AMBIENT TEMPERATURE IN °C PERFORMANCE CONDITIONS OF TEST CPCP TEST LIMITS CPCC, CPCL, CPCF TEST LIMITS Thermal Shock -55 °C to +275 °C (+225 °C for CPCF), 5 cycles, 30 min dwell time ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (2.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (0.1 % + 0.05 ) R ± (2.0 % + 0.05 ) R Low Temperature Storage -65 °C, full rated working voltage for 45 min ± (2.0 % + 0.05 ) R ± (3.0 % + 0.05 ) R Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Terminal Strength 5 s to 10 s 10 pound pull test ± (1.0 % + 0.05 ) R ± (1.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder up to body ± (1.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R TEST Revision: 29-Sep-2020 Document Number: 30218 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000