CPF2100K00FKE14

CPF www.vishay.com Vishay Dale Metal Film Resistors, Axial, Industrial Power, Precision, Flameproof FEATURES • High power rating, small size • Flameproof, high temperature silicone coating Available • Special filming and coating processes • Excellent high frequency characteristics • Low noise Available • Low voltage coefficient • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CPF1 CPF2 CPF3 HISTORICAL MODEL MAXIMUM WORKING VOLTAGE (1) V CPF-1 CPF-2 CPF-3 Note (1) Continuous working voltage shall be Revision: 18-Feb-2020 250 350 500 POWER RATING P70 °C W 1 2 3 RESISTANCE RANGE  TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C 5 to 150K 0.1, 0.25, 0.5, 1 25 5 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 0.5 to 150K 1, 2, 5 150 0.5 to 150K 1 200 0.2 to 150K 2, 5 200 0.1 to 150K 2, 5 300 5 to 150K 0.1, 0.25, 0.5, 1 25 5 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 0.5 to 150K 1, 2, 5 150 0.5 to 150K 1 200 0.2 to 150K 2, 5 200 0.1 to 150K 2, 5 300 8 to 150K 0.1, 0.25, 0.5, 1 25 8 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 1 to 150K 1, 2, 5 150 1 to 150K 1 200 0.2 to 150K 2, 5 200 0.1 to 150K 2, 5 300 P x R or maximum working voltage, whichever is less Document Number: 31021 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPF www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CPF1562R00FKR36 (preferred part numbering format) C P F 1 6 2 R 0 0 F RESISTANCE VALUE TOLERANCE CODE TEMPERATURE COEFFICIENT R= K = k R10000 = 0.1  10R000 = 10  150K00 = 150 k B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% G=±2% J=±5% E = 25 ppm H = 50 ppm K = 100 ppm L = 150 ppm N = 200 ppm M = 300 ppm GLOBAL MODEL CPF1 CPF2 CPF3 5 K R 3 6 PACKAGING SPECIAL E14 = lead (Pb)-free, bulk E36 = lead (Pb)-free, T/R (full) EE6 = lead (Pb)-free, T/R (1000 pcs) Blank = standard (dash number) (up to 3 digits) From 1 to 999 as applicable B14 = tin / lead, bulk R36 = tin / lead, T/R (full) RE6 = tin / lead, T/R (1000 pcs) Historical Part Number Example: CPF-15620FT-1 R36 (will continue to be accepted) CPF-1 5620 F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING Note • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544) TEMPERATURE COEFFICIENT CODES GLOBAL TC CODE HISTORICAL TC CODE E T-9 TEMPERATURE COEFFICIENT 25 ppm/°C H T-2 50 ppm/°C K T-1 100 ppm/°C L T-0 150 ppm/°C N T-00 200 ppm/°C M M 300 ppm/°C TECHNICAL SPECIFICATIONS PARAMETER UNIT CPF1 CPF2 Rated Dissipation at 70 °C W 1 2 CPF3 3 Limiting Element Voltage (1) V 250 350 500 Insulation Voltage Veff 900 900 900 Thermal Resistance K/W 85 60 50 Insulation Resistance  1010 Category Temperature Range °C -65 °C / +230 °C Note Rated voltage (1) P x R DIMENSIONS 1.50 ± 0.125 (1) (38.10 ± 3.18) L L1 max. GLOBAL MODEL D Revision: 18-Feb-2020 D L1 max. d CPF1 0.240 ± 0.020 0.090 ± 0.008 0.310 0.025 ± 0.002 (6.10 ± 0.51) (2.29 ± 0.20) (7.87) (0.64 ± 0.05) CPF2 0.344 ± 0.031 0.145 ± 0.015 0.425 0.032 ± 0.002 (8.74 ± 0.79) (3.68 ± 0.38) (10.80) (0.81 ± 0.05) CPF3 0.555 ± 0.041 0.180 ± 0.015 0.650 0.032 ± 0.002 (14.10 ± 1.04) (4.57 ± 0.381) (16.51) (0.81 ± 0.05) d Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim DIMENSIONS in inches (millimeters) L Document Number: 31021 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPF www.vishay.com Vishay Dale 250 CPF1 DERATING CPF2 CPF3 200 150 % RATED POWER HEAT RISE (°C ABOVE AMBIENT) THERMAL RESISTANCE 120 100 80 60 100 40 50 20 0 0 1 2 3 4 5 APPLIED POWER IN W 0 - 55 - 25 0 30 60 90 70 120 150 180 210 240 AMBIENT TEMP. IN °C Note • Surface temperatures were taken with an infrared pyrometer in +25 °C still air. Resistors were supported by their leads in test clips at a point 0.500" (12.70 mm) out from the resistor body ends MATERIAL SPECIFICATIONS Element MECHANICAL SPECIFICATIONS Proprietary nickel-chrome alloy Core Cleaned high purity ceramic Coating Special high temperature conformal coat Termination Standard lead material is solder-coated Solderable and weldable per MIL-STD-1276, type C Terminal Strength Solderability 2 pound pull test Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 MARKING Temperature Coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm, M = 300 ppm CPF1, CPF2, CPF3: (5 lines) DALE CPF-1 49.9 k 1 % T2 1208 Manufacturer’s name Style and size Value Tolerance and TC 4-digit date code PERFORMANCE TEST Thermal Shock MAX. R (TYPICAL TEST LOTS) ± 1.0 % Short Time Overload ± 0.5 % Low Temperature Operation ± 0.5 % Moisture Resistance ± 1.5 % Resistance to Soldering Heat ± 0.5 % Shock ± 0.5 % Vibration ± 0.5 % Terminal Strength ± 0.5 % Dielectric Withstanding Voltage ± 0.5 % Life ± 2.0 % Revision: 18-Feb-2020 Document Number: 31021 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000