CPF2R50000FLE14

CPF www.vishay.com Vishay Dale Metal Film Resistors, Industrial Power, Precision, Flameproof FEATURES • • • • • • • High power rating, small size Flameproof, high temperature coating Special filming and coating processes Excellent high frequency characteristics Low noise Low voltage coefficient Material categorization:  For definitions of compliance please see www.vishay.com/doc?99912 Available Available Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL MAXIMUM WORKING VOLTAGE (1) V POWER RATING P70 °C W CPF1 CPF-1 250 1 CPF2 CPF-2 350 2 CPF3 CPF-3 500 3 Note (1) Continuous working voltage shall be RESISTANCE RANGE  TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C 5 to 150K 5 to 150K 1 to 150K 0.5 to 150K 0.5 to 150K 0.1 to 150K 5 to 150K 5 to 150K 1 to 150K 0.5 to 150K 0.5 to 150K 0.1 to 150K 8 to 150K 8 to 150K 1 to 150K 1 to 150K 1 to 150K 0.1 to 150K 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1 2, 5 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1 2, 5 0.1, 0.25, 0.5, 1 0.1, 0.25, 0.5, 1, 2, 5 0.5, 1, 2, 5 1, 2, 5 1 2, 5 25 50 100 150 200 200 25 50 100 150 200 200 25 50 100 150 200 200 P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CPF1562R00FKR36 (preferred part numbering format) C P F 1 5 GLOBAL MODEL RESISTANCE VALUE CPF1 CPF2 CPF3 R=Ω K = kΩ R10000 = 0.1 Ω 10R000 = 10 Ω 150K00 = 150 kΩ 6 2 R TOLERANCE CODE B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% G=±2% J=±5% 0 0 F K TEMPERATURE COEFFICIENT E = 25 ppm H = 50 ppm K = 100 ppm L = 150 ppm N = 200 ppm R 3 6 PACKAGING SPECIAL E14 = Lead (Pb)-free, bulk Blank = Standard E36 = Lead(Pb)-free, T/R (full) (Dash Number) EE6 = Lead (Pb)-free, (Up to 3 digits) T/R (1000 pieces) From 1 to 999 B14 = Tin/lead, bulk as applicable R36 = Tin/lead, T/R (full) RE6 = Tin/lead, T/R (1000 pieces) Historical Part Number example: CPF-15620FT-1 R36 (will continue to be accepted) CPF-1 5620 F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING Note • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 11-Sep-13 Document Number: 31021 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPF www.vishay.com Vishay Dale TEMPERATURE COEFFICIENT CODES GLOBAL TC CODE HISTORICAL TC CODE TEMPERATURE COEFFICIENT E H K L N T-9 T-2 T-1 T-0 T-00 25 ppm/°C 50 ppm/°C 100 ppm/°C 150 ppm/°C 200 ppm/°C TECHNICAL SPECIFICATIONS PARAMETER UNIT CPF1 CPF2 Rated Dissipation at 70 °C W 1 2 CPF3 3 Limiting Element Voltage (1) V 250 350 500 Insulation Voltage Veff 900 900 900 Thermal Resistance K/W 85 60 50 Insulation Resistance  1010 Category Temperature Range °C -65 °C/+230 °C P x R DIMENSIONS 1.50 ± 0.125 (2) (38.10 ± 3.18) L d L1 max. HEAT RISE (°C ABOVE AMBIENT) Note (2) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. 250 CPF1 DIMENSIONS in inches (millimeters) GLOBAL MODEL D CPF2 CPF3 200 L D L1 max. d CPF1 0.240 ± 0.020 0.090 ± 0.008 0.310 0.025 ± 0.002 (6.10 ± 0.51) (2.29 ± 0.20) (7.87) (0.64 ± 0.05) CPF2 0.344 ± 0.031 0.145 ± 0.015 0.425 0.032 ± 0.002 (8.74 ± 0.79) (3.68 ± 0.38) (10.80) (0.81 ± 0.05) CPF3 0.555 ± 0.041 0.180 ± 0.015 0.650 0.032 ± 0.002 (14.10 ± 1.04) (4.57 ± 0.381) (16.51) (0.81 ± 0.05) % RATED POWER Note (1) Rated voltage 120 100 80 60 150 40 100 20 50 0 - 55 0 0 1 2 3 4 5 APPLIED POWER IN W - 25 0 30 60 90 70 120 150 180 210 240 AMBIENT TEMP. IN °C DERATING THERMAL RESISTANCE Note • Surface temperatures were taken with an infrared pyrometer in +25 °C still air. Resistors were supported by their leads in test clips at a point 0.500" (12.70 mm) out from the resistor body ends. MATERIAL SPECIFICATIONS Element Core Cleaned high purity ceramic Coating Special high temperature conformal coat Termination Standard lead material is solder-coated Solderable and weldable per MIL-STD-1276, Type C Revision: 11-Sep-13 MECHANICAL SPECIFICATIONS Proprietary nickel-chrome alloy Terminal Strength Solderability 2 pound pull test Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 Document Number: 31021 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CPF www.vishay.com Vishay Dale MARKING Temperature Coefficient: T00 = 200 ppm, T0 = 150 ppm, T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm CPF1, CPF2, CPF3: (5 lines) DALE CPF-1 49.9 k 1 % T2 1208 Manufacturer’s name Style and size Value Tolerance and TC 4-digit date code PERFORMANCE TEST Thermal Shock MAX. R (TYPICAL TEST LOTS) ± 1.0 % Short Time Overload ± 0.5 % Low Temperature Operation ± 0.5 % Moisture Resistance ± 1.5 % Resistance to Soldering Heat ± 0.5 % Shock ± 0.5 % Vibration ± 0.5 % Terminal Strength ± 0.5 % Dielectric Withstanding Voltage ± 0.5 % Life ± 2.0 % Revision: 11-Sep-13 Document Number: 31021 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000