CPR05220R0JE66

End of Life July 2020 CPR High Volume www.vishay.com Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Radial Terminals FEATURES • Direct mounting on printed circuit board • Circuit board lock-in mounting tabs • High performance for low cost • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE  METAL OXIDE GLOBAL MODEL (1) POWER RATING P40 °C W RESISTANCE RANGE  WIREWOUND CPR03...xx 3 0.1 to 100 - 5, 10 5.5 CPR05...xx 5 0.1 to 100 110 to 33K 5, 10 6.5 CPR10...xx 10 0.5 to 100 110 to 10K 5, 10 10 CPR15...xx 15 1.0 to 100 110 to 10K 5, 10 20.3 CPR20...xx 20 1.0 to 100 110 to 10K 5, 10 25.5 WEIGHT (typical) g TOLERANCE ±% Notes • E24 decade values are available, although others may be available upon request • The CPR07 product series was recently terminated and is not recommended for new designs. Hence it was removed from the datasheet (1) The xx is for the two digit “special” number as specified in Global Part Number Information section. Standard part number without the two digit “special” is 10.5 mm length (15 mm for CPR20), 1 pin terminals TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient CPR HIGH VOLUME RESISTOR CHARACTERISTICS ppm/°C ± 400 Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Terminal Strength lb 10 minimum Operating Temperature Range °C -65 to +275 for wirewound, -65 to +225 for metal oxide GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CPR05100R0JE6630 C P R 0 5 1 0 0 R 0 J E 6 6 3 0 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL CPR03 CPR05 CPR10 CPR15 CPR20 R = decimal K = thousand R1500 = 0.15 1K500 = 1500 J = ± 5.0 % K = ± 10.0 % E66 = lead (Pb)-free, bulk Blank = short, 1 pin CPRxx...30 = long, 1 pin CPRxx...31 = short, 2 pin CPRxx...32 = long, 2 pin Revision: 05-Feb-2020 Document Number: 30261 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life July 2020 CPR High Volume www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] L W W H1 H1 g g P H2 H2 0.016 [0.4] j j h h Terminal style 1 (Single Pin) GLOBAL MODEL TERMINAL STYLE CPR03 1 CPR03…30 1 CPR03…31 2 CPR03…32 2 CPR05 1 CPR05…30 1 CPR05…31 2 CPR05…32 2 CPR10 1 CPR10…30 1 CPR10…31 2 CPR10…32 2 CPR15 1 CPR15…30 1 CPR15…32 2 CPR20 1 CPR20…30 1 CPR20…32 2 Revision: 05-Feb-2020 L ± 0.059 [1.5] 0.944 [24] 0.944 [24] 0.944 [24] 0.944 [24] 1.10 [28] 1.10 [28] 1.10 [28] 1.10 [28] 1.89 [48] 1.89 [48] 1.89 [48] 1.89 [48] 1.89 [48] 1.89 [48] 1.89 [48] 2.461 [62.5] 2.461 [62.5] 2.461 [62.5] W ± 0.039 [1.0] 0.354 [9.0] 0.354 [9.0] 0.354 [9.0] 0.354 [9.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] H1 ± 0.039 [1.0] 0.354 [9.0] 0.354 [9.0] 0.354 [9.0] 0.354 [9.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.472 [12.0] 0.472 [12.0] 0.472 [12.0] 0.492 [12.5] 0.492 [12.5] 0.492 [12.5] D Terminal style 2 (Double Pin) DIMENSIONS in inches [millimeters] H2 D P ± 0.039 ± 0.005 ± 0.059 [1.0] [0.13] [1.5] 0.413 0.492 [10.5] [12.5] 0.492 0.984 [12.5] [25.0] 0.472 0.197 0.492 [12.0] [5.0] [12.5] 0.984 0.197 0.492 [25.0] [5.0] [12.5] 0.413 0.590 [15.0] [10.5] 0.984 0.590 [15.0] [25.0] 0.472 0.197 0.590 [5.0] [15.0] [12.0] 0.984 0.197 0.590 [5.0] [15.0] [25.0] 0.413 1.26 [10.5] [32.0] 1.26 0.984 [32.0] [25.0] 1.26 0.472 0.197 [5.0] [32.0] [12.0] 1.26 0.984 0.197 [5.0] [32.0] [25.0] 0.413 1.26 [10.5] [32.0] 0.984 1.26 [25.0] [32.0] 1.18 1.26 0.197 [5.0] [30.0] [32.0] 0.591 1.65 [15.0] [42.0] 0.984 1.65 [25.0] [42.0] 1.65 1.18 0.197 [5.0] [42.0] [30.0] G ± 0.008 [0.2] 0.197 [5.0] 0.287 [7.3] 0.287 [7.3] 0.287 [7.3] 0.197 [5.0] 0.287 [7.3] 0.287 [7.3] 0.287 [7.3] 0.197 [5.0] 0.287 [7.3] 0.287 [7.3] 0.287 [7.3] 0.197 [5.0] 0.287 [7.3] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] H ± 0.008 [0.2] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.069 [1.75] 0.106 [2.7] 0.106 [2.7] 0.069 [1.75] J ± 0.039 [1.0] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.193 [4.9] 0.199 [5.1] 0.199 [5.1] 0.193 [4.9] 0.193 [4.9] 0.199 [5.1] Document Number: 30261 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life July 2020 CPR High Volume www.vishay.com Vishay Dale DERATING Element: wirewound = copper-nickel alloy or nickel-chrome alloy, depending on resistance value; metal oxide = high temperature fired metal oxide film Core: ceramic Body: steatite ceramic case with cement potting compound RATED POWER IN % MATERIAL SPECIFICATIONS 120 100 80 60 Terminals: tin plated steel Part Marking: DALE, model, wattage, value, tolerance, date code Wirewound 40 20 0 -55 Metal oxide -25 25 75 40 125 175 275 225 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -55 °C to +275 °C (+225 °C for metal oxide), 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (2.0 % + 0.05 ) R Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (4.0 % + 0.05 ) R Revision: 05-Feb-2020 Document Number: 30261 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000