CPR20220R0KE6630

V i s hay I n t e r t e ch n o l o g y, I n c . AND TEC I INNOVAT O L OGY CA, CP, CPCC, CPCF, CPR High Volume N HN Wirewound/Metal Oxide Resistors O 19 62-2012 Resistors - High Power, Low Cost High Volume, Low-Cost, Axial Leaded, Wirewound/Metal Oxide, Commercial Power Resistors Key Benefits • • • • • Low-cost wirewound/metal oxide resistors Fireproof construction required for UL-approved circuitry Wide range of wattage ratings (1 W to 20 W) Wide resistance value range (0.1 Ω to 50 KΩ) CPCC and CPCF models have vertical-mount construction for board space savings APPLICATIONS • • • • • Capacitance discharge Pulsing applications High power dissipation Voltage dividers DC/DC converters Resources • • • • • Datasheet: CA High Volume - http://www.vishay.com/doc?30114 Datasheet: CP High Volume - http://www.vishay.com/doc?30113 Datasheet: CPCC/CPCF High Volume - http://www.vishay.com/doc?30116 Datasheet: CPR High Volume - http://www.vishay.com/doc?30261 For technical questions contact ww2aresistors@vishay.com One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9147-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Wirewound Resistors, Commercial Power, Axial Lead V i s hay I n t e r t e ch n o l o g y, I n c . I INNOVAT • Auto insertable O L OGY • High performance for low cost CA, CP, CPCC, CPCF, CPR High Volume AND TEC N HN Wirewound/Metal Oxide Resistors O FEATURES CA High Volume • High temperature coating for environmental protection Vishay Dale 19 62-2012 • Compliant to RoHSPower, Directive 2002/95/EC Wirewound Resistors, Commercial Axial Lead APPLICATIONS CA High Volume High Volume, Low-Cost, Vishay Dale CP High Volume Axial Leaded, VishayOxide, Dale Commercial Power Resistors esistors, Commercial Wirewound/Metal Power, Axial Lead FEATURES Kitchen appliances: • High performance for low cost • Percolators, blenders, mixers, ranges, toasters, deep • Auto insertable fryers • High temperature coating for protection Entertainmentenvironmental and consumer devices: • Compliant to RoHS Directive 2002/95/EC • Radios, televisions APPLICATIONS Computers and power supplies Wirewound/Metal Oxide Resistors,•Commercial Power, Axial Lead Kitchen appliances: Axial Lead (CA) Wirewoufor • High performance ndlow cost Resistors, • Auto insertable Revision 04-Fev-11 FEATURES Commerc • High temperature coating for environmental protection Resistors - High Power, Low Cost CA High V • Compliant to RoHS Directive 2002/95/EC APPLICATIONS Kitchen appliances: • Percolators, blenders, mixers, ranges, fryers Vishay Dal POWER RATING e ia l Pow GLOBAL MODEL er, Axial L ead CA0001 FEATUR ES Axial Lead (CP) • Radios, televisions ELECTRIC AL SPECIF CP• High High Votolum power size ratio e ICATIONS C DEL POWER RA 25 °C W with a ...3 model ending)E RESISTANCE RANGE TOLERANCE stand-offs (designated  (typical) CA0002  ± 1.0 % g • Special cement potting ceramic 0.1 to 1K 2.0 compound and CP0003  2.0 CA HIGH VOLUME RESISTOR CHARACTERISTICS • Compliant to RoHS Directive 2002/95/EC ± 350 UNIT - CA HIGH VOLUME RESISTOR CHARACTERISTICS 5 x rated power for 5 s ± 350 1/2 (P x5R) x rated power for 5 s 0.80 350 (P x R)1/2 RESISTANCE RANGE Ω 350 TOLERANCE - 65 to + 275 METAL OXIDE - 65 to + 275 ±% 10 10 101 to 30K 5, 10 0.1 to 100 3 GLOBAL PART NUMBER 0.1 to 100 INFORMATION GLOBAL PART NUMBER INFORMATION CP0005 5 Global 0.1 to 100 Part Numbering example: CA000150R00JE66 TOLERANC E WEIGHT ± % Part Numbering example: Global CA000150R00JE66 C A 0 0.1 0to 100 0 1 5 0 CP0005...3 (typic 5 101 to 33K WEIGHT (typical) g 2.0 5, 10 Wirewound/Metal Oxide Resistors,101Commercial to 50K 5, Power, 10 R 101 0 to 50K 0 J E 6 65, 10 Vertical Mount 7 0.1 to 100 101 to 50K 5, 10 al) Wirewound/M 5, 10 eta to 1K in0.65 high thermal l Oxconductivity 0.1TE to 1K case provide 5, 10 ide 0.1Re C A 0 g 0 sisators,CP0007 CHNICAL Co 5 5, 10 mmerc SPEC ial0.6Po fireproof package IFIC ATIO5, 10 NS ±% g • Special cement potting compound and ceramic to 1K 5, 10 0.65 case0.1provide high thermal conductivity in a 0.1 to 1K 5, 10 0.80 fireproof package 1.0 PARAMETER 2 5, 10 0.65 cases are available with circuit board WEIGHT 1K RESISTANCE 5, 10TOLERANCE 0.80 stand-offsRANGE (designated with a ...3 model ending) (typical) TECHNICAL ppm/°CSPECIFICATIONS Vishay Dale CP0002 TIN G Ceramic board Vis•ha SISTANCEWEIGHT y Dalecases are Pavailable withREcircuit CA0001 RANG 0.1PAtoRA1K METER POWER RATING 0.1 to P25 °C W • Percolat Temperature Coefficient ppm/°C ors, blend ersWorking , mixers, Maximum Voltage V fryers Overload STANDARD ELECTRICAL SPECIFICATIONS ranges, toa Short Time sters, deep Entertainm Dielectric Withstanding Voltage Maximum V Working Voltage V ent and co AC POWER RATING nsumer de RESISTANCE RANGE Dielectric Withstanding Voltage VAC Ω • Radios, tel vices: GLOBAL MODEL P40 °C ev Operating Temperature Range °C isions Operating TemperatureWIREWOUND Range °C • Compute rsTerminal and powerStrength (minimum) W Terminal Strength lb (minimum) lb supplies Revision 10-Jan-11 ATING GLOBAL MO • High power to size ratio 1.0 ELECTRICAL SPECIFICATIONS 0.1 to 1K• Ceramic STANDARD PL WEIGHT (typical) g • Radios, televisions CPCC, CPCF High Volume •FEATURES Computers and power supplies • DA High performance for low cost STAN RD CIFICATIONS Entertainment and consumer devices: FEATURES TOLERANCE RESISTANCE RANGE • High performance for cost • Computers andlow power supplies ±%  P25 °C W • High peCA0002 2.0 rformance for low cost GLOBAL MODEL • Auto insert able • High tem perature co CA0001 ating for environme ntal protec CA0002 TECHNICAL SPECIFICATIONS tion • Complian t to Ro UNIT toasters, PARAMETER deep HS Directive 2002/95/EC AP ICAT Temperature Coefficient IONS xide Resistors, Commercial Power, AxialKitchLead en applian ces: Short Time Overload Entertainment and consumer devices: • Percolators, blenders, mixers, ranges, toasters, deep fryers olu me STANDARD ELECTRICAL SPECIFICATIONS CP0007...3 0.80 7 0 1 5 0 R GLOBAL MODEL VALUE we 100 r, Ax ial 0.1 (See Standard Electrical R = Decimal Letoad 0 0 J TOLERANCE E 6 6 PACKAGING 101 to 50K 5, 10 FEATURES J = ± 5.0 % E66 = Lead (Pb)-free, tape/reel 3.4 3.6 4.8 5.0 SPECIAL 6.8 (Dash Number) (up to 3 digits) 9.5 SPECIAL From 1 to 999 as applicable 9.9 table/ 0.1 toK100 = Thousand K = ± 10.0 % to 50K Tempera• to RoHSUNDirective 2002/95/EC CP0010 10 Specifications 101 5, 10 tureCompliant IT • Space saving Coefficient GLOBAL MODEL VALUE TOLERANCE PACKAGING Global Model column R1500 = 0.15  Short Time CA HIGH VO ppm/°C Overload options) 1K000 = 1000  LUME RESIS CP0010...3 10 R =for 0.1 to 100 101 50K(Pb)-free, 5, 10 • Direct mounting on printed circuit board(Dash Number) (See Standard Electrical Decimal J = ± 5.0 % E66 = to Lead tape/reel TO Maximum FEARTUR CHARES Working Vo ACTERISTIC ltage S K = ± 10.0 % (up to 3 digits) Specifications table/ ± CP0015 15 K = Thousand 0.1 to 100 101 to 50K 5, 10 16.8 350 Dielectric Wi V • High power to size ratio High performance for thstanding 5 x rated • Vo Global Model column R1500 = 0.15  From 1 to 999 as low ltag power for 5 cost IT CA HIGH VOLUMEeRESISTOR CHARACTERISTICS Opera ting VAC CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8 s Temperatur e Range High for options) 1K000 = 1000  applicable (P • 1/2 pow • Special cement potting compound and ceramic x WEIGHT er R) to Te size rm ratio °C Ω /°C ± 350 RESISTANCE RANGE Ω inal Streng TOLERANCE RESISTANCE RANGE th (minimum ) (typical) 35 case provide high thermal conductivity in a • 0Ceramic cases are lb available with circuit boa METAL OXIDE ±% WIREWOUND 5 x rated power for 5 s rd 275 d-offs g- 65 to +stan fireproof package (designated with a ...3 GLOBAL model ending) 10 PART NU (P x R)1/2 0.1 to 100 Globa 101 to R30K 5, 10 2.0 • Special cement MBE IN • www.vishay.com/doc?99902 Compliant to RoHS Directive FO ** Please see document “Vishay MaterialCHARACTERISTICS Category Policy”: l Part Numb potting compou RMATION PARAMETER UNIT WIREWOUND METAL OXIDE 2002/95/EC CHARACTERISTICS nd and eri cera ng 350 mic ex amto C case provide high ther ple33K 0.1 to 100 101 5, 10 3.4 : CA000150 Number: 30114 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com R00JE66 mal Document C cond uctiv A Temperature Coefficient ppm/°C ± 400 ± 400 ity in a 0 firep Revision: 04-Feb-11 1 roof package C 65 0.1 to 100 1010to -50K 5, 10 3.6 0 to + 275 ECIFICATIONS olume TECHNICAL SPECIFICATIONS plian CPR High t to RoHSVolume 0 0.1 to 100 101 to 50K 10 5, 10 0 Directive 2002/95/EC J 4.8E etal Oxide Resistors, Commercial Power, 6 Terminal lb 10 minimum CPCC, CPCF HighMount Volume 6 Strength Vertical 0.1 to 100 to 50K 10 5.0 STANDARD ELECTRICAL SPECIFICATIONS STANDARD101 ELE CTRICAL SPECIF5, Operating Temperature RangeMaterial °CCategory Policy”:-www.vishay.com/doc?99902 65 to + 275 Vishay ICA TIONS ** Please seeDale document “Vishay Mount 0.1Vertical to 100 101 to 50K 5, 10 6.8 (CPCC/CPCF) RESISTANCE RANGE RESISTANCE RANGE POWER RATING Vishay Dale POWER RATING GLOBAL Withstanding Voltage RMATION Dielectric V 1000 0.1 to 100 150R00JE66 0.1 to 100 1 50.1 to 0100 0.1 to 100 1 GLOBAL MO DEL (See Stand ard Specificatio Electrical ns table/ Global Mo del column for options) GLOBAL 5 VALUE R = Decim al K = Thousan R1500 = 0.1 d 5 1K MODEL 00 0 =P10 101 to 50K 4000 °C CP0002• 0 CP0003 •Short ComTime Overload R - TOLERANC E J = ± 5.0 % K = ± 10.0 % PACKAGING E66 = Lead SPECIAL (Pb)-free, tap P40 °C AC RES5, e/reel 10 NCE RANGE Ω9.5 Document ISTA Number:(Da30114 For MODEL sh RESISTANCE Number) Maximum Working Voltage V RAN 04-Feb-11 TOLW (upGE ERANCE to 3Ωdig 5,WIR 10 EWOUND 9.9 Revision: METAL OXID FroEm 1 to its) 999 as ± % CPCC02 2 6 5, 10 applicable 16.8 0.1 to 100 Space saving 0 101 J to 50KE2 6 3 • Direct 101 mounting board 0.1 to 50K on printed circuit 5, 10 to 100 CP0005 5 x rated power for 5 s 10 minimum - 65 to + 225 TOLERANCE 1000   technical questions, contact: ww2aresistors@vishay.com ± %(P x R)1/2 (P x R)1/2 METAL OXIDE WIREWOUND WEIG HT 5 ratio High power to size TOLERANCE PACKAGING CP0005.•..3 Revision 10-Dec-10 101 to 33K CPCC03 0.1 to 100 5,3 10 0.1 to 100 SPECIAL Global 3.4 Part Numbering example: CP000515R00JE663 FEATURES 101 5 ** Please see CPCF03 to 50K NA 5,3 10 0.1and to 100 3.6 do cement potting compound ceramic CP0 cum•entSpecial mal J = ± 5.0 %007 E66 = Lead (Pb)-free, tape/reel (Dash Number) • Space saving “Vishay Ma C 101 Pto 50K 0 0 5 1 0.1 5to 100 R terial Categ7 Do S 5,0 510 0.1 to 100(upin ory Policy sand K cum = ±ent 10.0 % to a 3 digits)CPCC05 Numb 4.8 case provide high thermal conductivity CP0 er: 30 ”: www.vish 007. ..3 11 Revision: 04 101 4 • Direct mounting to 50K on printed circuit board ay.com/do 7 -Fe b-1 .15WIREWOUND  From For tecMETAL 5,510 1 9902 1 to 999 as CHARACTERISTICS OXIDE CHARACTERISTICS 0.1 to c?9 CPCF05 NA hnical quest 100 fireproof package 5.0 TOLERANCE CP0010 ions, conta GLOBAL VALUE 101 to MODEL 50K power to size ratio ct: ww2aresi 10 000  applicable• High 5, 10 stors@vishay 0.1 to 100 ± 400CP0010.•..3Compliant to RoHS Directive ± 400 CPCC07 0.1 to5.0 100% 6.8 J .com (See 2002/95/EC Standard Electrical R =7Decimal =± 101cement to 50K 10 • Special potting compound and ceramic 5, 0.1 tofor www.v ay. 100 5 x rated power for 5s 5 x rated power 5s 9.5 K = ± Specifications Global = Thousand 10.0 % CPCF07 710 NA CP0 015 comK conductivity to 50K high ish case 101 provide thermal in a 15 5, Model column for R150010= 0.15 Ω 0.1 to 100 1 9.9 0.1 to 100 CP0020 10 minimum 10 minimum CPCC10 10 101 fireproof package to 50K 20 options) 1K500 5, 10= 1500 Ω to 100 16.8 - 65 to + 275 - 65 to 0.1 + 225 101 to 50K • Compliant to RoHS Directive 2002/95/EC 5, 10 22.8 1000 1000 ECIFICATIONS E 5 x rated power for 5 s WEIGHT (typical) www.vishay.com g 1 4.7 101 to 50K W Wirewound/Metal Resistors, Commercial Power, Wirewound/Metal Oxide Resistors, Commercial Power,(typiOxide cal) 0.1 to 100 NA 5, 10 g 101 to Radial Terminals 30K CPCF02 2 NA 101 to 50K 5, 10 4.7 Vertical22.8Mount 5, 10INFORMATION GLOBAL PART NUMBER 2.0 FEATURES R 0 TECHNICAL SPECIF ICATIONS 1/2 NA 5, 10 5.5 101 to 50K 5, 10 5.5 FEATURES on circuit 0 • Direct 0 NAmounting J E printed 65, 10 6 board 3 • Circuit 101 to board 50K lock-in mounting 5, 10 tabs 6.9 6.9 PACKAGING SPECIAL • High NA performance for low5,cost 10 9.2 E66 = Lead (Pb)-free bulk pack (Dash Number) to 39.2 digits) • Special inorganic potting compound (up and 101 to 50K 5, 10 From 1 to 999 ceramic case provide thermal NA 5, 10high 14.3 as applicable conductivity in a fireproof package • Compliant to RoHS Directive 2002/95/EC (P xRANGE R)PAR RESISTANCE RANGE (P x R)1/2 WEIGHT TECHNICAL SPECIFICATIONS RESISTANCE AMETER TOLERANCE UNIT (typical) PARAMETER   WIREWOUND CHARAC UNIT CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS Temperature Coefficien TERISTICS ± % t METAL OXIDE CHARAC SPECIFICATIONS METAL ELECTRICAL OXIDE g WIREWOUND STANDARD ppm/°C TERISTICS ± 400 Temperature Coefficient ppm/°C ± 400 Shor t Time Over egory Policy”: www.vishay.com/doc?99902 STANDARD ELECTRICAL SPECIFICATIONS load ORMATION WEIGHT RESISTANCE RANGE RESISTANCE RANGE POWER RATING 0.1 to 100 NA 5, 10 4.7 ± 400 5 x rated power for 5 ** Short GLOBAL PleaseTime see Overload document TOLERANCE “Vishay Material Category Policy”: www.vishay.com/doc?99902 5 x rated power for 5 s Term inal Strength s (typical)   P40lb°C RESISTANCE RESISTANCE 5 x rated 0515R00JE663 technical questions, ww2aresistors@vishay.com www.vishay.com pow ± % MODEL NA contact: 101 to 50K 5, 10 4.7 er for 5 s WEIGHT POWER RATING 10 minimum CPR High Volume Operating Tem METAL g V questions, WIREWOUND W GLOBAL RANGE RANGE contact: ww2aresistors@vishay.com Maximum Working Voltage (P TOLERANCE x R)1/2 perature www.vishay.com For technical Document Number: 30113 Range 1 OXIDE °C 10 minim (typical) P40um °C NA J - 65 + 2755.5 44MODEL DieleCPCC02 1 0.15to 100 R 0 ding E2 65, 10 6 0.1 3toto100 Revision: 10-Jan-11 ±%  NA (1)Temperature Range 5, 10 4.7°C ctric0With stan Operating - 65 to +  275 for wirewound, - 65 to + 225 for metal oxide Voltage FEATURES Vishay Dale g VAC - 65 to + W 225 NA to 50K 5, 10 5.5 1000 METAL OXIDE MaxCPCF02 2 NA 101 to 50K 5, 10 4.7WIREWOUND imum Work101 ing Voltage Terminal Strength lb 10 minimum V 1000 • Direct mounting on printed circuit board TOLERANCE PACKAGING SPECIAL 1/2 R) CPR03...xx 101 to 30K 5, 10 5.5 0.1 to 100 NA 5, 10 6.9 CPCC03 3 0.1(Ptox 100 NA 5, 10 3 5.5 0.1 to 100 Wirewound/Metal Oxide Commercial Power, 1000 Withstanding Voltage VAC (P x R)1/2 J = ± 5.0 % E66 = Lead (Pb)-free bulk pack (DashResistors, Number) Dielectric • Circuit CPR05...xx 101 to 33K 5, 10 6.5 CPCF03 3 mounting 101 to 50K 5, 10 5 5.5 0.1 to 100 NA 101 toboard 50K lock-in 5, 10 tabs NA 6.9 d K = ± 10.0 % (up to 3Terminals digits) GLOBAL PART NUM Radial BER INF 101 to 50K 5, 10 9.5 5 low 100 1 to NA 5, 10 7 6.9 0.5 to 100 • High NA performance for cost OR5, MA 0.1 to 100 GlobCPCC05 10TION0.1 toFrom 9.2999 CPR07...xx Ω al Part Numbering exam CPR10...xx 101 to 50K 5, 10 10 ple: CP0 CPCF05 5potting NA 101 to 50K 5, 10 10 6.9 0.5 to 100 Ω asand applicable 00515, 5R00 JE663 NA 101 to 50K 10 9.2 FEATURES • Special inorganic compound GLOBAL PART NUMBER INFORMATION C CPCC07 CPR15...xx 101 to 50K 5, 10 20.3 • Direct mounting on printed circuit5,board P ceramic 7 0.1 to 100 NA 10 15 9.2 1.0 to 100 0 NA 0 case0 provide 0.1 to 100 14.3 5 5, 10 1 high 5 thermal R board lock-in tabs 0 • Circuit Global Numbering example: CPR20...xx 101 to 50K 5, 10 25.5 CPCF07 conductivity in a fireproof 7 NA 101 toJPart 50K 5, 10 20 CPCC0515R00JE66 9.2 1.0 to 100 0 package E mounting 6 GLOBAL MOD 6 3 EL VALU10 • High E CPCC10 0.1 to 100 NA P for low 14.3 Note TOLERAN Cperformance C cost C5, 10 0 5 1 5 R 0 0 J E 6 6 (See Stan CE dard • Elec Compliant toRRoHS Directive 2002/95/EC trical PAC KAG = ING • Special inorganic potting compound and Deci (1) mal Specifications Global The xx is for the two digit “special” number as specified in Global Part Number Information section. Standard part number without the two J = ± 5.0 % SPECIAL E66 K = Thousand = Lead case ceramic provide high thermal (Pb)-free S bulk Model column for K = ± 10.0 % pack digit “special” is 10.5 mm length (15 mm for CPR20), 1 pin terminals. (Das h Num R1500 = 0.15 Ω GLOBAL VALUE PACKAGING SPECIAL ber) TOLERANCE conductivity in a MODEL fireproof package options)CPCF HIGH UNIT CPCC, VOLUME RESISTOR CHARACTERISTICS (up to 1K50 3 digit 0 = 1500 Ω TECHNICAL SPECIFICATIONS tegory Policy”: www.vishay.com/doc?99902 s) G Revision 25-Jul-11 etal Oxide Resistors, Commercial Radial TerminalsPower, Radial Terminals (CPR) • Compliant to RoHS Directive 2002/95/EC From 1 to 999 Standard Electrical R =CHARACTERISTICS Decimal J = ± 5.0 % E66 = Lead (Pb)-free bulk pack (Dash Number) UNIT CPCC,(See CPCF HIGH VOLUME RESISTOR as applicable Document Number: 30113 Specifications Global K = Thousand K = ± 10.0 % (up to 3 digits) TECHNICAL SPECIFICATIONS s Temperature Coefficient5 x rated power for 5 ppm/°C Revision: 10-Jan-11 Model column for ± 400 R1500 = 0.15  From 1 to 999 RESISTANCE RESISTANCE WEIGHT PARAMETER G options) 1K500 1500  Short Time Overload ELECTRICAL 5 x rated power for 5 s =UNIT CPR HIGH VOLUME RESISTOR CHARACTERISTICS as applicable STANDARD V RANGE (PTOLERANCE x R)1/2SPECIFICATIONS RANGE (typical)RESISTANCE 1/2 RESISTANCE Maximum Working Voltage V (P x R) ± %   Temperature Coefficient ppm/°C ± 400 °C - 65 to + 275 for wirewound, 65 to + 225 for metal oxide WEIGHT POWER-RATING g TOLERANCE GLOBAL RANGE RANGE ** Please Operating METAL OXIDE WIREWOUND P40 °C Temperature Range °C - 65Short to + 275 for Overload wirewound, - 65 to + 225 (typical) for -metal oxide see docu (1) men Time 5 x rated power for 5 s t “Vish ±% MODEL   lb 10 Cate minimum ay Material g Wgory Policy”: www .vish 0.1 to 100 101 to 30K 5, 10 5.5 METAL OXIDE WIREWOUND ay.co Terminal Strength lb 10 minimum m/do c?99 www.vishay.com 902 Maximum Working Voltage V (P x R)1/2 1000 VAC 3 5,nical 0.1 to 100 5, 10 5.5 44 0.1 to 100 101 to 33K VoltageFor tech 10 quesVtions 6.5 101 to 30K 1000 DielectricCPR03...xx Withstanding AC , contact: ww2 aresi Terminal Strength lb 10 minimum @vishay.c CPR05...xx 5 0.1 to 100 101stors to 33K 6.5 om 5, 10 Document Number: 3011 0.5 to 100 101 to 50K 5, 10 to change without 9.5 101 This document is subject notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO ** Operating Please document Category Policy”: www.vishay.com/doc?99902 3 CPR07...xx 7 0.5 to 100 to 50K see 5, 10 “Vishay 9.5 Temperature RangeMaterial °Csion: - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide Revi 10-Jan-11 0.5 to 100 101 to 50K 10 CPR10...xx 10 5, 10 0.5 to 100 101 to 50K 5, 10 10 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORMATION www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30116 GLOBAL INFORMATION CPR15...xx 1.0 to 100 5, 10 20.3 1.0 to 100 101 PART to 50K NUMBER 15 5, 10 20.3 101 to 50K 1 to 50K Revision: 20-Dec-10 CPR20...xx 20 1.0 to 100 101 5, 10 25.5 0515R00JE66 1.0 to 100 101Numbering to 50K 5, 10 25.5 Global Part example: CPCC0515R00JE66 ppm/°C ± 400 PARAMETER ECIFICATIONS technical questions, contact: ww2aresistors@vishay.com PRODUCT SHEET 2/2 VMN-PT9147-1201