End of Life May-2021
CPSL
www.vishay.com
Vishay Dale
Wirewound Resistors, Commercial Power,
Four Terminal, Low Value
FEATURES
•
•
•
•
•
•
•
•
•
•
Low inductance
Extremely low resistance values
Available
Current sensing
Low temperature coefficients
High power to size ratio
Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
Available
Superior surge capability
Complete welded construction
Available
Special inorganic potting compound and
ceramic case provide high thermal conductivity
in a fireproof package
Available
Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details
SCHEMATIC
Sense
leads
Current
leads
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CPSL03...5
CPSL03...3
CPSL05...5
CPSL05...3
CPSL07...5
CPSL10...5
CPSL15...5
HISTORICAL
MODEL
CPSL-3-5
CPSL-3-3
CPSL-5-5
CPSL-5-3
CPSL-7-5
CPSL-10-5
CPSL-15-5
POWER RATING P40 °C
W
3
3
5
5
7
10
15
RESISTANCE RANGE
Ω
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
TOLERANCE
±%
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
WEIGHT (typical)
g
4.0
4.2
5.2
5.4
7.6
10.2
18.9
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
Dielectric Withstanding Voltage
UNIT
ppm/°C
V
°C
lb
VAC
CPSL RESISTOR CHARACTERISTICS
± 100 maximum
5 x rated power for 5 s
(P x R)1/2
-65 to +275
10 minimum
1000
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: CPSL05R0500JB143
C
P
S
L
0
5
R
0
5
GLOBAL MODEL
VALUE
TOLERANCE
CPSL03
R = decimal
F = ± 1.0 %
CPSL05
R1000 = 0.10 Ω
G = ± 2.0 %
CPSL07
H = ± 3.0 %
CPSL10
J = ± 5.0 %
CPSL15
K = ± 10.0 %
Historical Part Numbering Example: CPSL-5-3 0.05 Ω 5 % B14
0
0
J
B
1
4
PACKAGING
E14 = lead (Pb)-free bulk
E31 = lead (Pb)-free four layer bulk
B14 = tin / lead bulk
B31 = tin / lead four layer bulk
3
SPECIAL
(Dash number)
(up to 3 digits)
From 1 to 999
as applicable
CPSL-5-3
0.05 Ω
5%
B14
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Revision: 11-Jan-2021
Document Number: 30217
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2021
CPSL
www.vishay.com
Vishay Dale
DIMENSIONS in inches [millimeters]
CPSLxx...5
CPSLxx...3
1.0 [25.4]
min.
1.0 [25.4]
min.
B
A
C
A
C
D
1.50 ± 0.062
[38.1 ± 1.57]
1.50 ± 0.062
[38.1 ±1.57]
E
E
F
F
GLOBAL
MODEL
B
DIMENSIONS in inches [millimeters]
A (1)
± 0.031 [0.794]
B
± 0.031 [0.794]
C
± 0.031 [0.794]
D
± 0.031 [0.794]
E
± 0.001 [0.025]
F
± 0.063 [1.59]
CPSL03...5
0.875 [22.22]
0.313 [7.94]
0.313 [7.94]
-
0.036 [0.914]
0.563 [14.30]
CPSL03...3
0.875 [22.22]
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.036 [0.914]
0.563 [14.30]
CPSL05...5
0.875 [22.22]
0.375 [9.52]
0.344 [8.73]
-
0.036 [0.914]
0.563 [14.30]
CPSL05...3
0.875 [22.22]
0.375 [9.52]
0.344 [8.73]
0.438 [11.11]
0.036 [0.914]
0.563 [14.30]
CPSL07...5
1.391 [35.32]
0.375 [9.52]
0.344 [8.73]
-
0.036 [0.914]
1.000 [25.40]
CPSL10...5
1.875 [47.62]
0.375 [9.52]
0.344 [8.73]
-
0.036 [0.914]
1.375 [34.93]
CPSL15...5
1.875 [47.62]
0.500 [12.70]
0.500 [12.70]
-
0.036 [0.914]
1.375 [34.93]
Note
(1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side
DERATING
Element: self-supporting copper-nickel alloy or nickelchrome alloy, depending on resistance value
Body: steatite ceramic case with inorganic potting
compound
Terminals: tinned copper
Part Marking: Dale, model, wattage, value, tolerance, date
code
RATED POWER IN %
MATERIAL SPECIFICATIONS
120
100
80
60
40
20
0
-65
-25
25
75
40
125
175
225
275
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Thermal Shock
-55 °C to +275 °C, 5 cycles, 30 min dwell time
± (5.0 % + 0.05 Ω) ΔR
Short Time Overload
5 x rated power for 5 s
± (4.0 % + 0.05 Ω) ΔR
Dielectric Withstanding Voltage
1000 VRMS for 1 min
± (2.0 % + 0.05 Ω) ΔR
Low Temperature Operation
-65 °C, full rated working voltage for 45 min
± (3.0 % + 0.05 Ω) ΔR
Bias Humidity
75 °C, 90 % to 100 % RH, 240 h
± (5.0 % + 0.05 Ω) ΔR
Load Life
1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF”
± (5.0 % + 0.05 Ω) ΔR
Terminal Strength
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each
± (1.0 % + 0.05 Ω) ΔR
Resistance to Solder Heat
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
± (1.0 % + 0.05 Ω) ΔR
Revision: 11-Jan-2021
Document Number: 30217
2
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000