CRHP1206AF100MFKET

CRHP www.vishay.com Vishay Techno Thick Film Chip Resistors, High Voltage FEATURES • • • • • • • • • • • High voltage up to 3000 V Available Outstanding stability < 0.5 % Flow solderable Available Automatic placement capability Tape and reel packaging available Termination style: 3-sided wraparound termination Internationally standardized sizes Termination material: solder-coated nickel barrier or solder coated non-magnetic terminations standard Multiple styles, termination materials and configurations, allow wide design flexibility Epoxy bondable or wire bondable non-magnetic terminations available Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CRHP1206 CRHP1210 CRHP2010 CRHP2510 CRHP2512 CASE SIZE POWER RATING P70 °C W MAXIMUM WORKING VOLTAGE (1) V 1206 0.50 1675 1210 2010 2510 2512 0.70 1.0 1.2 1.5 1870 2000 2500 3000 RESISTANCE RANGE (2) Ω TOLERANCE (3) ±% 2M to 100M 0.5 2M to 1G 1, 2, 5, 10, 20 1.1G to 8G 2, 5, 10, 20 4M to 100M 0.5 4M to 1G 1, 2, 5, 10, 20 1.1G to 10G 2, 5, 10, 20 6M to 100M 0.5 6M to 1G 1, 2, 5, 10, 20 1.1G to 10G 2, 5, 10, 20 11G to 35G 5, 10, 20 10M to 100M 0.5 10M to 1G 1, 2, 5, 10, 20 1.1G to 10G 2, 5, 10, 20 11G to 40G 5, 10, 20 10M to 100M 0.5 10M to 1G 1, 2, 5, 10, 20 1.1G to 10G 2, 5, 10, 20 11G to 50G 5, 10, 20 TEMPERATURE COEFFICIENT (4) (-55 °C to +155 °C) ± ppm/°C 100 100 100 100 100 Notes • For non-standard sizes, lower values or higher power rating requirement, contact factory (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (2) Resistance values below 1 GΩ are calibrated at 100 V , and values of 1 GΩ and above are calibrated at 1000 V . Calibration at other DC DC voltages available upon request (3) Contact factory for tighter tolerances (4) Reference only: not for all values specified. Consult factory for your size and value Revision: 19-May-2021 Document Number: 68045 1 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRHP www.vishay.com Vishay Techno GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRHP1206AF100MFKFB (preferred part number format) GLOBAL MODEL CRHP R SIZE 1206 1210 2010 2510 2512 H P 1 2 0 6 A TERMINAL STYLE TERMINAL MATERIAL RESISTANCE VALUE A = 3-sided F = nickel barrier G = non-magnetic M = MΩ G = GΩ 4M70 = 4.7 MΩ 10M0 = 10 MΩ 1G00 = 1 GΩ F Substrate K SOLDER TERMINATION K = 100 ppm L = 150 ppm N = 200 ppm R = 250 ppm M = 300 ppm W = 350 ppm P = 500 ppm E = Sn100 F = Sn95/Ag5, HSD T = Sn90/Pb10 F B PACKAGING B = bulk (250 pcs max.) F = T/R (full reel) 1 = T/R (1000 pcs) 5 = T/R (500 pcs) T = T/R (250 pcs min.) W = waffle tray DERATING CURVE Axis Title 10000 120 100 96 % alumina Solder finish Pure tin or tin/lead solder alloys standard. Tin/silver solder alloy available. 1000 80 60 100 40 20 ENVIRONMENTAL SPECIFICATIONS 10 0 -55 °C to +155 °C -55 -25 0 25 50 70 100 125 155 175 Ambient Temperature (°C) Less than 0.5 % change when tested at full rated power Short time overload F Glass Solder-coated nickel barrier or solder coated non-magnetic terminations standard Life M D = ± 0.5 % F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Ruthenium oxide Termination Operating temperature 0 TCR 2nd line Rated Power (%) Encapsulation 0 TOLERANCE MECHANICAL SPECIFICATIONS Resistive element 1 1st line 2nd line C Note • Reference only: not for all values specified. Consult factory for your size and value Less than 0.5 % ΔR VOLTAGE COEFFICIENT OF RESISTANCE CHART SIZE VALUE (Ω) VCR (ppm/V) FURTHER INSTRUCTIONS CRHP1206 2M to 199M 25 Values over 200M, consult factory CRHP1210 4M to 200M 25 Values over 200M, consult factory 6M to 99M 15 100M to 1G 20 10M to 99M 10 100M to 1G 15 10M to 999M 10 1G to 5G 25 CRHP2010 CRHP2510 CRHP2512 Revision: 19-May-2021 Values over 1G, consult factory Values over 1G, consult factory Values over 5G, consult factory Document Number: 68045 2 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRHP www.vishay.com Vishay Techno DIMENSIONS in inches (millimeters) Termination Style A (3-sided wraparound) W L T 0.025 [0.635] Max. LENGTH (L) ± 0.006 (0.152) WIDTH (W) ± 0.006 (0.152) THICKNESS (T) ± 0.002 (0.051) CRHP1206 0.125 0.063 0.025 CRHP1210 0.125 0.100 0.025 CRHP2010 0.200 0.100 0.025 CRHP2510 0.250 0.100 0.025 CRHP2512 0.250 0.126 0.025 MODEL TYPE TERMINATION MATERIAL TERMINATION STYLE TERMINATION STYLE / MATERIAL CODE SOLDER TERMINATION CODE Nickel barrier 3-sided (wraparound) AF E or T (standard); F (optional) (1) Non-magnetic 3-sided (wraparound) AG E or T (standard); F (optional) (1) Solderable Note (1) Standard solder plating for the nickel barrier and non-magnetic parts is solder terminations E or T. Hot solder dipped termination F is also available PERFORMANCE TEST CONDITIONS OF TEST TEST RESULTS (TYPICAL TEST LOTS) Life MIL-STD-202, method 108, 1000 h rated power at +70 °C ≤ ± 0.5 % High temperature exposure MIL-STD-202, method 108 ≤ ± 0.2 % Low temperature operation MIL-PRF-55342, paragraph 4.8.5 ≤ ± 0.05 % Resistance to bonding exposure MIL-STD-202, methods 210 ≤ ± 0.1 % Moisture resistance MIL-PRF-55342, paragraph 4.8.9 ≤ ± 0.06 % Solder mounting integrity MIL-PRF-55342, paragraph 4.8.13, 2 kg for 30 s Solderability MIL-STD-202, method 208 Revision: 19-May-2021 No evidence of mechanical damage 95 % coverage Document Number: 68045 3 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000