CSC10A05121CGPA

CSC www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP FEATURES • Isolated, bussed, and schematics available dual terminator Available • Body height: “A” profile = 0.195" (4.95 mm) and “B” profile = 0.295" (7.50 mm) standard; custom “C” profile = 0.350" (8.89 mm) also available • “A” profile standard in 4 thru 12 pins Available • Thick film resistive elements • Reduces total assembly costs • Resistor elements protected by tough epoxy conformal coating • Wide resistance range (10 Ω to 2.2 MΩ) • Available in bulk pack as standard; optional tube pack is also available • Meets EIA/ECA-CB23 rev. G whisker test requirements for class 1A products • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS TEMPERATURE GLOBAL POWER RATING RESISTANCE PACKAGE COEFFICIENT MODEL / ELEMENT (1) RANGE HEIGHT (-55 °C to +125 °C) SCHEMATIC P70 °C W Ω ± ppm/°C A 0.20 CSCxxx01 B A 0.25 0.30 CSCxxx03 B A 0.40 0.20 CSCxxx05 B 0.25 10 to 50 TOLERANCE (2) ±% MAX. TCR TRACKING (1) WORKING (-55 °C to +125 °C) VOLTAGE (3) ± ppm/°C VDC 250 50.1 to 2.2M 100 10 to 50 250 50.1 to 2.2M 100 10 to 50 250 50.1 to 2.2M 100 10 to 50 250 50.1 to 2.2M 100 10 to 50 250 50.1 to 2.2M 100 10 to 50 250 50.1 to 2.2M 100 1, 2, 5 50 100 1, 2, 5 50 100 1, 2, 5 150 100 Notes • See derating curves for package power rating (1) For resistor power ratings at +25 °C see derating curves (2) ± 2 % standard, ± 1 % and ± 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less Revision: 16-Jun-2020 Document Number: 31509 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CSC www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGEK (preferred part number format) C S GLOBAL MODEL CSC C 0 A PACKAGE HEIGHT PIN COUNT 04 to 12 pin available 04 = 4 pin 08 = 8 pin 12 = 12 pin 8 0 3 SCHEMATIC A = “A” profile B = “B” profile 01 = bussed 03 = isolated 00 = special 1 0 0 R E G RESISTANCE VALUE TOLERANCE CODE R=Ω K = kΩ M = MΩ 10R0 = 10 Ω 680K = 680 kΩ 1M00 = 1.0 MΩ 0000 = 0 Ω Jumper F=±1% G=±2% J=±5% S = special Z=0Ω Jumper K PACKAGING SPECIAL EK = lead (Pb)-free, bulk PA = tin / lead, bulk Blank = standard (dash number) (up to 3 digits) From 1 to 999 as applicable Historical Part Number example: CSC08A03101GEK (will continue to be accepted) CSC 08 A 03 101 G EK HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: CSC08A05131AGEK (preferred part number format) C GLOBAL MODEL CSC S C 0 A 0 5 PACKAGE HEIGHT SCHEMATIC A = “A” profile B = “B” profile 05 = dual terminator PIN COUNT 04 to 12 pin available 04 = 4 pin 08 = 8 pin 12 = 12 pin 8 1 3 1 A G RESISTANCE VALUE TOLERANCE CODE 3 digit impedance code, followed by alpha modifier (see impedance table) F=±1% G=±2% J=±5% E K PACKAGING SPECIAL EK = lead (Pb)-free, bulk PA = tin / lead, bulk Blank = standard (dash number) (up to 3 digits) From 1 to 999 as applicable Historical Part Number example: CSC08A05131AGEK (will continue to be accepted) CSC 08 A 05 221 331 G EK HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542) TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage coefficient of resistance Veff < 50 ppm typical Dielectric strength VAC 200 Isolation resistance (03 schematic) Ω > 100M Operating temperature range °C -55 to +125 A Max. 0.098 (2.49) Max. DIMENSIONS in inches (millimeters) C Max. 0.130 ± 0.010 (3.30 ± 0.254) Pin #1 0.032 (0.813) 0.050 (1.27) Max. 0.100 ± 0.010 (2.54 ± 0.254) Non-Accumulative Revision: 16-Jun-2020 0.018 ± 0.003 (0.457 ± 0.076) 0.045 (1.14) 0.012 ± 0.003 (0.305 ± 0.076) (Leads are along centerline of body) B Document Number: 31509 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CSC www.vishay.com Vishay Dale 01 SCHEMATIC 1 2 GLOBAL MODEL 3 n-1 CSC04 CSC05 CSC06 CSC07 CSC08 CSC09 CSC10 CSC11 CSC12 n 03 SCHEMATIC 1 2 GLOBAL MODEL 3 4 n-1 CSC04 CSC06 CSC08 CSC10 CSC12 n 05 SCHEMATIC GLOBAL MODEL R2 R1 1 2 3 n-1 n CSC04 CSC05 CSC06 CSC07 CSC08 CSC09 CSC10 CSC11 CSC12 MECHANICAL SPECIFICATIONS Marking resistance to solvents Solderability Body Permanency testing per MIL-STD-202, method 215 Per MIL-STD-202, method 208E, RMA flux NUMBER OF RESISTORS A (MAX.) B C (MAX.) 3 4 5 6 7 8 9 10 11 0.390 (9.91) 0.490 (12.45) 0.590 (14.99) 0.690 (17.53) 0.790 (20.07) 0.890 (22.61) 0.990 (25.15) 1.09 (27.69) 1.19 (30.23) 0.300 (7.62) 0.400 (10.16) 0.500 (12.70) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.00 (25.40) 1.100 (27.94) “A” profile = 0.195 (4.95) “B” profile = 0.295 (7.50) NUMBER OF RESISTORS A (MAX.) B C (MAX.) 2 3 4 5 6 0.390 (9.91) 0.590 (14.99) 0.790 (20.07) 0.990 (25.15) 1.19 (30.23) 0.300 (7.62) 0.500 (12.70) 0.700 (17.78) 0.900 (22.86) 1.100 (27.94) “A” profile = 0.195 (4.95) “B” profile = 0.295 (7.50) NUMBER OF RESISTORS A (MAX.) B C (MAX.) 4 6 8 10 12 14 16 18 20 0.390 (9.91) 0.490 (12.45) 0.590 (14.99) 0.690 (17.53) 0.790 (20.07) 0.890 (22.61) 0.990 (25.15) 1.09 (27.69) 1.19 (30.23) 0.300 (7.62) 0.400 (10.16) 0.500 (12.70) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.00 (25.40) 1.100 (27.94) “A” profile = 0.195 (4.95) “B” profile = 0.295 (7.50) STOCKED RESISTANCE VALUES IN Ω (“G” TOLERANCE) Standard E-24 resistance values stocked; consult factory. Many dual terminator resistance values stocked; consult factory. High alumina, epoxy coated Terminals (1) Solder plated leads Note (1) Coating meniscus meets class 2 requirements of IPC-A-610 IMPEDANCE CODES CODE R1 (Ω) R2 (Ω) CODE R1 (Ω) R2 (Ω) 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note • For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530) Revision: 16-Jun-2020 Document Number: 31509 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CSC www.vishay.com Vishay Dale “A” PROFILE +70 °C PACKAGE RATINGS Power Rating (W) ”A“ Profile CSC10A Package 1.90 CSC08A Package 1.50 CSC06A Package 1.15 Single Resistor 01 and 05 Schematics - 50 + 25 + 70 + 125 + 150 Ambient Temperature °C Derating ”B“ Profile Power Rating (W) CSC08B Package CSC06B Package 1.50 CSC11A 1.37 W CSC10A 1.25 W CSC09A 1.12 W CSC08A 1.00 W CSC07A 0.87 W CSC06A 0.75 W CSC05A 0.62 W CSC04A 0.40 W “B” PROFILE +70 °C PACKAGE RATINGS CSC10B Package 2.00 1.5 W 03 Schematic 0.45 0.30 2.50 CSC12A CSC12B 1.90 W CSC11B 1.75 W CSC10B 1.60 W CSC09B 1.45 W CSC08B 1.30 W CSC07B 1.15 W CSC06B 1.00 W CSC05B 0.80 W CSC04B 0.60 W Single Resistor 03 Schematic 0.60 01 and 05 Schematics 0.38 - 50 Derating Revision: 16-Jun-2020 + 25 + 70 + 125 + 150 Ambient Temperature °C Document Number: 31509 4 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CSC www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic Bussed The CSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (pin no. 1). Commonly used in the following applications: • “Wired OR” pull-up • Power gate pull-up • MOS/ROM pull-up/pull-down 1 2 3 n-1 n • Open collector pull-up • TTL input pull-down • TTL unused gate pull-up Note • “A” profile standard, “B” profile available 03 Schematic Isolated The CSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: 1 2 3 4 n-1 • “Wired OR” pull-up • Long-line impedance balancing • Power driven pull-up • LED current limiting • Power gate pull-up • ECL output pull-down • Line termination • TTL input pull-down Note • “A” profile standard, “B” profile available n 05 Schematic Dual Terminator The CSCxxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R2 R1 Note • “A” profile standard, “B” profile available 1 2 3 n-1 n PERFORMANCE TEST Thermal shock Short time overload Low temperature operation Moisture resistance Resistance to soldering heat CONDITIONS MAX. ΔR (TYPICAL TEST LOTS) 5 cycles between -65 °C and +125 °C ± 0.50 % ΔR 2.5 x rated working voltage, 5 s ± 0.25 % ΔR 45 min at full rated working voltage at -65 °C ± 0.25 % ΔR 240 h with humidity ranging from 80 % RH to 98 % RH ± 1.00 % ΔR Leads immersed in +350 °C solder to within 1/16" of body for 3 s ± 0.25 % ΔR Total of 18 shocks at 100 g's ± 0.25 % ΔR Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR Load life 1000 h at +70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period; derated according to the curve ± 1.00 % ΔR Terminal strength 4.5 pound pull for 30 s ± 0.25 % ΔR Insulation resistance 10 000 MΩ (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - Shock Dielectric withstanding voltage Revision: 16-Jun-2020 Document Number: 31509 5 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000