CW005820R0JE73

CW www.vishay.com Vishay Dale Wirewound Resistors, Commercial Power, Silicone Coated, Axial Lead FEATURES • • • • • • DESIGN SUPPORT TOOLS High performance for low cost High temperature silicone coating Complete welded construction Excellent stability in operation High power to size ratio Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details click logo to get started Models Available Available Available Available Available STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL MODEL GLOBAL MODEL POWER RATING (1) P25 °C W POWER RATING (1) P25 °C W RESISTANCE RANGE TOLERANCE WEIGHT CHARACTERISTIC U CHARACTERISTIC V  ± % (2) (max.) g +250 °C +350 °C 0.5 0.1 to 1.77K 5, 10 0.21 1.0 0.1 to 6.37K 5, 10 0.34 1.0 0.1 to 3.3K 5, 10 0.3 4.0 5.5 0.1 to 28.7K 5, 10 2.1 3.0 3.75 0.1 to 12K 5, 10 0.65 3.0 3.75 0.1 to 15K 5, 10 0.7 5, 10 0.9 4.0 6.0 0.1 to 10.89K (3) 2.5 3.25 0.1 to 19.9K 5, 10 1.8 2.5 3.25 0.1 to 19.9K 5, 10 1.2 5.0 6.5 0.1 to 58.5K 5, 10 4.2 4.0 5.0 0.1 to 40.3K 5, 10 4.2 5.0 6.5 0.1 to 58.5K 5, 10 4.2 7.0 9.0 0.1 to 95.2K 5, 10 4.7 10.0 13.0 0.1 to 167K 5, 10 9.0 10.0 13.0 0.1 to 167K 5, 10 9.0 CW1/2 CW-1/2 CW001 CW-1 CW01M CW-1M CW002 CW-2 CW02M CW-2M CW02B CW-2B CW02B...13 CW-2B-13 CW02C CW-2C CW02C...14 CW-2C-14 CW005 CW-5 CW005...2 CW-5-2 CW005...3 CW-5-3 CW007 CW-7 CW010 CW-10 CW010...3 CW-10-3 Notes (1) Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements (2) 3 % tolerance available (3) Higher values available on request TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient ppm/°C Dielectric Withstanding Voltage VAC Short Time Overload Terminal Strength lb Maximum Working Voltage V Operating Temperature Range °C Power Rating - CW RESISTOR CHARACTERISTICS ± 30 for 10  and above, ± 50 for 1.0  to 9.9 , ± 90 for 0.5  to 0.99  1000 5 x rated power for 5 s for 3.75 W size and smaller, 10 x rated power for 5 s for 4 W size and greater 10 minimum (P x R)1/2 Characteristic U = -65 to +250, characteristic V = -65 to +350 Characteristic U = +250 °C max. hot spot temperature, ± 0.5 % max. R in 2000 h load life Characteristic V = +350 °C max. hot spot temperature, ± 3.0 % max. R in 2000 h load life GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CW02C10K00JB1214 C W GLOBAL MODEL (see Standard Electrical Specifications Global Model column for options) 0 2 C 1 0 K 0 0 J B 1 2 1 4 PACKAGING SPECIAL (dash number) E70 = lead (Pb)-free, tape / reel, 1K pcs (smaller than CW005) E73 = lead (Pb)-free, tape/reel, 500 pcs (up to 3 digits) E12 = lead (Pb)-free, bulk from 1 to 999 D18 = lead (Pb)-free, R1R80 tape/reel as applicable CW02B...13 pack code for Europe use only S70 = tin / lead, tape / reel, 1K pcs (smaller than CW005) S73 = tin / lead, tape / reel, 500 pcs B12 = tin / lead, bulk Historical Part Numbering example: CW-2C-14 10 k 5 % B12 CW-2C-14 10 k 5% B12 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 15-Nov-17 VALUE TOLERANCE R = decimal H = ± 3.0 % K = thousand J = ± 5.0 % 1R500 = 1.5  K = ± 10.0 % 1K500 = 1.5 k Document Number: 30215 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CW www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 1.50 [38.10] (1) min. C A B D DIMENSIONS in inches [millimeters] MODEL A B [MAXIMUM] (2) C CW1/2 0.250 ± 0.031 [6.35 ± 0.787] 0.281 [7.14] 0.085 ± 0.020 [2.16 ± 0.508] CW001 0.406 ± 0.031 [10.31 ± 0.787] 0.437 [11.10] 0.094 ± 0.031 [2.39 ± 0.787] CW01M 0.270 ± 0.031 [6.86 ± 0.787] 0.311 [7.90] 0.110 ± 0.015 [2.79 ± 0.381] CW002 0.625 ± 0.062 [15.87 ± 1.57] 0.765 [19.43] 0.250 ± 0.032 [6.35 ± 0.813] CW02M 0.500 ± 0.062 [12.70 ± 1.57] 0.562 [14.27] 0.185 ± 0.032 [4.70 ± 0.813] CW02B 0.562 ± 0.062 [14.27 ± 1.57] 0.622 [15.80] 0.188 ± 0.032 [4.78 ± 0.813] CW02B...13 0.500 ± 0.062 [12.70 ± 1.57] 0.563 [14.30] 0.188 ± 0.032 [4.78 ± 0.813] CW02C 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.032 [5.54 ± 0.813] CW02C...14 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.032 [5.54 ± 0.813] CW005 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.312 ± 0.032 [7.92 ± 0.813] CW005...2 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.250 ± 0.032 [6.35 ± 0.813] CW005...3 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.312 ± 0.032 [7.92 ± 0.813] CW007 1.218 ± 0.062 [30.94 ± 1.57] 1.281 [32.54] 0.312 ± 0.032 [7.92 ± 0.813] CW010 1.781 ± 0.062 [45.24 ± 1.57] 1.875 [47.62] 0.375 ± 0.032 [9.52 ± 0.813] CW010...3 1.781 ± 0.062 [45.24 ± 1.57] 1.875 [47.62] 0.375 ± 0.032 [9.52 ± 0.813] Notes (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown (2) B (maximum) dimension is clean lead to clean lead DERATING Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: ceramic: steatite or alumina, depending on physical size Coating: special high temperature silicone Standard Terminals: tinned Copperweld® (CW02B…13 is tinned copper) End Caps: stainless steel Part Marking: DALE, model, wattage (1), value, tolerance, date code Note (1) Wattage marked on resistor will be “V” characteristic, CW1/2 will not be marked with wattage. RATED POWER IN % MATERIAL SPECIFICATIONS D 0.020 ± 0.002 [0.508 ± 0.051] 0.020 ± 0.002 [0.508 ± 0.051] 0.020 ± 0.002 [0.508 ± 0.051] 0.040 ± 0.002 [1.02 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.040 ± 0.002 [1.02 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.040 ± 0.002 [1.02 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 0.040 ± 0.002 [1.02 ± 0.051] 0.040 ± 0.002 [1.02 ± 0.051] 0.032 ± 0.002 [0.813 ± 0.051] 120 100 80 60 CHAR. V CHAR. U 40 20 0 - 50 - 65 0 50 25 150 250 350 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage High Temperature Exposure Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Terminal Strength CONDITIONS OF TEST Rated power applied until thermally stable, then a minimum of 15 min at -55 °C 5x rated power (3.75 W and smaller), 10 x rated power (4 W and larger) for 5 s TEST LIMITS (1) (CHARACTERISTIC V) ± (2.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R 1000 Vrms, 1 min ± (0.1 % + 0.05 ) R -65 °C for 24 h 250 h at +350 °C MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each 2000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” 5 s to 10 s 10 pound pull test; torsion test - 3 alternating directions, 360° each ± (2.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (0.2 % + 0.05 ) R ± (0.2 % + 0.05 ) R ± (3.0 % + 0.05 ) R ± (1.0 % + 0.05 ) R Note (1) All R figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of +350 °C. R maximum figures are considerably lower when tested at a maximum operating temperature of +250 °C Revision: 15-Nov-17 Document Number: 30215 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000