0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
CW010270R0JE73HS

CW010270R0JE73HS

  • 厂商:

    TFUNK(威世)

  • 封装:

    AXIAL-D9.52X45.24MM

  • 描述:

    RES 270 OHM 13W 5% AXIAL

  • 详情介绍
  • 数据手册
  • 价格&库存
CW010270R0JE73HS 数据手册
CW - High Surge www.vishay.com Vishay Dale Wirewound Resistors, High Surge Immunity, Silicone Coated, Axial Lead FEATURES • High voltage surge immunity, up to 12 kV • High temperature silicone coating Available • Complete welded construction • Excellent stability in operation • High power to size ratio • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Available Available Available Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING (1) P25 °C W CHARACTERISTIC U +250 °C GLOBAL MODEL POWER RATING (1) P25 °C W CHARACTERISTIC V +350 °C RESISTANCE RANGE  TOLERANCE ±% WEIGHT (max.) g 0.34 CW001...HS 1.0 - 0.1 to 6.37K 5, 10 CW02B...HS 3.0 3.75 0.1 to 15K 5, 10 0.7 CW005...HS 5.0 6.5 0.1 to 58.5K 5, 10 4.2 CW010...HS 10.0 13.0 0.1 to 167K 5, 10 9.0 Note (1) Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements. TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient Dielectric Withstanding Voltage UNIT CW RESISTOR CHARACTERISTICS ppm/°C ± 30 for 10  and above, ± 50 for 1.0  to 9.9 , ± 90 for 0.5  to 0.99  VAC 1000 Short Time Overload - 5 x rated power for 5 s for 3.75 W size and smaller, 10 x rated power for 5 s for 4 W size and greater Terminal Strength lb 10 minimum Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C Characteristic U = -65 to +250, characteristic V = -65 to +350 - Characteristic U = +250 °C max. hot spot temperature, ± 0.5 % max. R in 2000 h load life Characteristic V = +350 °C max. hot spot temperature, ± 3.0 % max. R in 2000 h load life Power Rating GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CW02B10K00JB12HS (preferred part number format) C W 0 2 B 1 0 K 0 0 J B 1 2 H S GLOBAL MODEL (5 digits) VALUE (5 digits) TOLERANCE (1 digit) PACKAGING (3 digits) SPECIAL (2 digits) CW001 CW02B CW005 CW010 R = Decimal K = Thousand 1R500 = 1.5  1K500 = 1.5 k H = ± 3.0 % J = ± 5.0 % K = ± 10.0 % E70 = Lead (Pb)-free, tape/reel, 1K pcs. (CW001 and CW02B) E73 = Lead (Pb)-free, tape/reel, 500 pcs. E12 = Lead (Pb)-free, bulk HS = High Surge Revision: 31-Mar-14 S70 = Tin/lead, tape/reel, 1K pcs. (CW001 and CW02B) S73 = Tin/lead, tape/reel, 500 pcs. B12 = Tin/lead, bulk Document Number: 30285 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CW - High Surge www.vishay.com Vishay Dale HIGH VOLTAGE SURGE The surge handling capability is based upon applying an exponential open circuit voltage waveform according to specification IEC 61000-4-5 (1.2 μs/50 μs) as shown below at an ambient temperature of 25 °C. U 1.0 0.9 B 0.5 T2 A 0.3 0.1 0.0 O1 T T1 t 30 % max. { Front time: T1 = 1.67 x T = 1.2 μs ± 30 % Time to half-value: T2 = 50 μs ± 20 % Open circuit voltage waveform at the output of the pulse generator PEAK SURGE VOLTAGE - IEC 61000-4-5 (1.2 μs/50 μs pulse) Peak Surge Voltage (V) 100 000 10 000 12 kV 10 kV 8 kV 6 kV 4 kV CW010...HS 1000 CW005...HS CW02B...HS CW001...HS 100 0.1 1 10 100 1000 10 000 100 000 Resistance (Ω) MINIMUM RESISTANCE VALUE FOR SURGE VOLTAGE GLOBAL MODEL PEAK SURGE VOLTAGE 4 kV 6 kV 8 kV 10 kV CW001...HS 586  1.7  - - 12 kV - CW02B...HS 151  457  1.0 k 1.8 k 3.0 k CW005...HS 15  43  94  171  281  CW010...HS 2.6  7.6  17  30  50  Revision: 31-Mar-14 Document Number: 30285 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CW - High Surge www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 1.50 [38.10] (1) min. C A B D DIMENSIONS in inches [millimeters] MODEL A B [MAXIMUM] (2) C D CW001...HS 0.406 ± 0.031 [10.31 ± 0.787] 0.437 [11.10] 0.094 ± 0.031 [2.39 ± 0.787] 0.020 ± 0.002 [0.508 ± 0.051] CW02B...HS 0.562 ± 0.062 [14.27 ± 1.57] 0.622 [15.80] 0.188 ± 0.032 [4.78 ± 0.813] 0.032 ± 0.002 [0.813 ± 0.051] CW005...HS 0.875 ± 0.062 [22.22 ± 1.57] 1.0 [25.40] 0.312 ± 0.032 [7.92 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051] CW010...HS 1.781 ± 0.062 [45.24 ± 1.57] 1.875 [47.62] 0.375 ± 0.032 [9.52 ± 0.813] 0.040 ± 0.002 [1.02 ± 0.051] Notes (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown. (2) B (maximum) dimension is clean lead to clean lead. DERATING Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic: Steatite or alumina, depending on physical size Coating: Special high temperature silicone Standard Terminals: Tinned Copperweld® RATED POWER IN % MATERIAL SPECIFICATIONS 120 100 80 60 End Caps: Stainless steel 40 Part Marking: DALE, model, wattage (3), value, tolerance, date code 20 Note (3) Wattage marked on resistor will be “V” characteristic. 0 - 50 - 65 CHAR. V CHAR. U 0 50 25 150 250 350 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (4) (CHARACTERISTIC V) Thermal Shock Rated power applied until thermally stable, then a minimum of 15 min at -55 °C ± (2.0 % + 0.05 ) R Short Time Overload 5 x rated power (3.75 W and smaller), 10 x rated power (4 W and larger) for 5 s ± (2.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS, 1 min ± (0.1 % + 0.05 ) R ± (2.0 % + 0.05 ) R Low Temperature Storage -65 °C for 24 h High Temperature Exposure 250 h at +350 °C ± (4.0 % + 0.05 ) R Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (2.0 % + 0.05 ) R ± (0.2 % + 0.05 ) R Shock, Specified Pulse MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.2 % + 0.05 ) R Load Life 2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (3.0 % + 0.05 ) R Terminal Strength 5 s to 10 s 10 pound pull test; torsion test - 3 alternating directions, 360° each ± (1.0 % + 0.05 ) R Note (4) All R figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of +350 °C. R maximum figures are considerably lower when tested at a maximum operating temperature of +250 °C. Revision: 31-Mar-14 Document Number: 30285 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000
CW010270R0JE73HS
物料型号:CW系列,包括CW001...HS、CW02B...HS、CW005...HS和CW010...HS等型号。

器件简介:这些电阻器具有高浪涌电压承受能力,最高可达12kV,采用高温硅涂层和全焊接结构,具有出色的操作稳定性和高功率体积比。

引脚分配:文档中未明确提供引脚分配信息,但通常线绕电阻器为轴向引线。

参数特性: - 温度系数:对于10Ω及以上为30ppm/°C,1.0Ω至9.9Ω为50ppm/°C,0.1Ω至0.99Ω为90ppm/°C。 - 介质耐压:1000V AC。 - 短时过载能力:对于3.75W及以下尺寸,5倍额定功率5秒;对于4W及以上尺寸,10倍额定功率5秒。 - 端子强度:至少10磅。 - 最大工作电压:(PxR)^1/2 V。 - 工作温度范围:特性U为-65°C至+250°C,特性V为-65°C至+350°C。

功能详解:文档提供了电阻器的详细性能测试条件和限制,包括热冲击、短时过载、耐电压、低温存储、高温暴露、耐湿性、冲击、高频振动和负载寿命等。

应用信息:文档未明确提供应用信息,但根据其高浪涌电压承受能力和稳定性,适用于需要高稳定性和高电压保护的应用场合。

封装信息:提供了详细的尺寸信息,包括模型、最大尺寸、引脚长度等,以及材料规格,包括元素、芯材、涂层、标准端子和端盖。
CW010270R0JE73HS 价格&库存

很抱歉,暂时无法提供与“CW010270R0JE73HS”相匹配的价格&库存,您可以联系我们找货

免费人工找货