D102K29X5FL63L6R

D Series Vishay BCcomponents Ceramic Disc Capacitors Class 1 and 2, 500 VDC, General Purpose D FEATURES D • Low losses • High stability Tangent line • High capacitance in small size Tangent line SH SH • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing F • Coupling F Capacitors with 5 mm (0.20") and 7.5 mm (0.30") lead spacing DESIGN QUICK REFERENCE DATA DESCRIPTION CLASS 1 (C0G (NP0), SL0) CLASS 2 (YP5, Z5U, Y5V, X5F) Voltage (VDC) 500 Min. Capacitance (pF) 10 Max. Capacitance (pF) 82 Mounting • Resonant circuit 100 22 000 Through hole The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm. The capacitors have inward kinked leads with a spacing of 5 mm (0.200") or 7.5 mm (0.300") and a lead length from 4 mm to 30 mm. Encapsulation is made of phenolic resin. CAPACITANCE RANGE Class 1, at 1 MHz, 1.2 VRMS; 10 pF to 82 pF MARKING Marking indicates capacitance value and tolerance in accordance with “EIA 198”. The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions. Class 2, at 1 kHz, 1 ± 0.2 VRMS; 100 pF to 22 000 pF 1 kHz, 1 VRMS ± 0.2 VRMS for capacitance values higher than 1000 pF RATED DC VOLTAGE 500 V OPERATING TEMPERATURE RANGE DIELECTRIC STRENGTH Class 1, - 55 °C to + 125 °C 250 % of rated voltage Class 2, - 55 °C to + 85 °C INSULATION RESISTANCE AT 500 VDC TEMPERATURE COEFFICIENTS ≥ 10 000 MΩ Class 1, C0G (NP0); SL0 TOLERANCE ON CAPACITANCE Class 2, Y5P; Z5U; Y5V; X5F ± 5 %; ± 10 %; ± 20 %; + 80/- 20 % SECTIONAL SPECIFICATIONS DISSIPATION FACTOR Class 1, IEC 60 384-8 Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10-4 maximum Class 2, IEC 60 384-9 Class 1, C > 30 pF; ≤ 0.2 % EIA 198 Class 2, ≤ 3.0 % CLIMATIC CATEGORY Class 1, 55/125/21 Class 2, 10/85/21, 30/85/21 and 55/85/21 www.vishay.com 40 For technical questions, contact: CDC@vishay.com Document Number: 28513 Revision: 07-Jan-10 D Series Ceramic Disc Capacitors Class 1 and 2, 500 VDC, General Purpose Vishay BCcomponents ORDERING INFORMATION (PREFERED TYPES), CLASS 1, 500 VDC, KINKED CLEAR TEXT CODE C (pF) TOL. (%) CLASS 1 NP0 10 12 15 18 22 27 CLASS 1 SL0 33 39 47 56 68 82 DMAX. (mm) LEAD SPACING (mm) (1) SH (mm) 4.0 D100J20C0GL6.J5. D120J20C0GL6.J5. D150J20C0GL6.J5. D180J25C0GL6.J5. D220J25C0GL6.J5. D270J25C0GL6.J5. 4.0 D330J20SL0L6.J5. D390J20SL0L6.J5. D470J20SL0L6.J5. D560J20SL0L6.J5. D680J25SL0L6.J5. D820J25SL0L6.J5. 5.0 ±5 5.0 6.5 5.0 ±5 5.0 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16TH DIGIT: R = RoHS COMPLIANT 6.5 Notes (1) SH = seated height • Maximum thickness 4.0 mm • Lead style codes refer to inward kinked leads. Other styles available on request ORDERING INFORMATION (PREFERED TYPES), CLASS 2, 500 VDC, KINKED CLEAR TEXT CODE C (pF) CLASS 2 Y5P 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10 000 CLASS 2 Y5V 1000 1500 2200 3300 4700 6800 10 000 15 000 22 000 TOL. (%) DMAX. (mm) LEAD SPACING (mm) (1) SH (mm) 4.0 D101K20Y5PL6.J5. D151K20Y5PL6.J5. D221K20Y5PL6.J5. D331K20Y5PL6.J5. D471K20Y5PL6.J5. D681K25Y5PL6.J5. D102K25Y5PL6.J5. D152K29Y5PL6.J5. D222K33Y5PL6.J5. D332K39Y5PL6.J5. D472K43Y5PL6.J5. D682K53Y5PL6.J7 D103K69Y5PL6.J7. 4.0 D102Z20Y5VL6.J5. D152Z20Y5VL6.J5. D222Z25Y5VL6.J5. D322Z25Y5VL6.J5. D472Z29Y5VL6.J5. D682Z33Y5VL6.J5. D103Z39Y5VL6.J5. D153Z43Y5VL6.J5. D223Z53Y5VL6.J7. 5 ± 10 6.5 7.5 8.5 10 11 13.5 17.5 5 7.5 5 6.5 + 80/- 20 Document Number: 28513 Revision: 07-Jan-10 7.5 8.5 10.0 11.0 13.5 5 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16TH DIGIT: R = RoHS COMPLIANT 7.5 For technical questions, contact: CDC@vishay.com www.vishay.com 41 D Series Vishay BCcomponents Ceramic Disc Capacitors Class 1 and 2, 500 VDC, General Purpose ORDERING INFORMATION (PREFERED TYPES), CLASS 2, 500 VDC, KINKED CLEAR TEXT CODE C (pF) TOL. (%) DMAX. (mm) LEAD SPACING (mm) 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16TH DIGIT: R = RoHS COMPLIANT SH (1) (mm) CLASS 2 Z5U 1000 D102M20Z5UL6.J5. 1500 D152M25Z5UL6.J5. 5.0 2200 D222M25Z5UL6.J5. 3300 4700 7.5 ± 20 D332M29Z5UL6.J5. 5.0 8.5 D472M33Z5UL6.J5. 4.0 6800 10.0 D682M39Z5UL6.J5. 10 000 11.0 D103M43Z5UL6.J5. 15 000 13.5 D153M53Z5UL6.J7. 22 000 15.0 7.5 D223M59Z5UL6.J7. CLASS 2 X5F 1 00 D101K20X5FL6.J5.R. 2 20 5.0 D221K20X5FL6.J5.R. 330 D331K20X5FL6.J5.R. 470 680 ± 10 6.5 5.0 D471K25X5FL6.J5.R. 4.0 D681K25X5FL6.J5.R. 1000 7.5 D102K29X5FL6.J5.R. 2200 10.0 D222K39X5FL6.J5.R. 3300 12.0 4700 13.5 D332K47X5FL6.J7R. 7.5 4.8 D472K53X5FL6.J7R. Note (1) SH = seated height • Maximum thickness 4.0 mm • Lead style codes refer to inward kinked leads. Other styles available on request PACKAGING DMAX. (mm) SIZE CODE 5.0 (0.20") 20 6.5 (0.25") 25 7.5 (0.29") 29 8.5 (0.33") 33 10.0 (0.39") 39 11.0 (0.43") 43 12.0 (0.47") 47 13.5 (0.53") 53 15.0 (0.59") 59 17.5 (0.69") 69 PACKAGING QUANTITIES BULK REEL AMMO 1000 2000 2000 500 - - Note • The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack. www.vishay.com 42 For technical questions, contact: CDC@vishay.com Document Number: 28513 Revision: 07-Jan-10 D Series Ceramic Disc Capacitors Class 1 and 2, 500 VDC, General Purpose P2 D Vishay BCcomponents Δh P ΔP Δh ΔP H1 W2 H0 W1 W0 W A e P1 Ød Direction of unreeling F P0 D0 t1 detail A Kinked capacitors on tape, lead spacing 5.0 mm (0.2") DIMENSIONS OF TAPE SYMBOL PARAMETER D Body diameter d DIMENSIONS (mm) NOMINAL TOLERANCE 11.0 maximum - Lead diameter 0.6 ± 0.05 P (1) Pitch between capacitors 12.7 ± 1.0 P0 Feed-hole pitch 12.7 ± 0.3 ΔP Plane deviation 1.0 maximum - P1 (2) Feed-hole center to lead center 3.85 ± 0.7 P2 (2) Feed-hole center to component center 6.35 ± 1.3 F Lead spacing 5.0 0.6 - 0.4 Δh Component alignment 0 ± 1.0 W Tape width 18.0 1.0 - 0.5 W0 Hold-down tape width 5.0 minimum - W1 Hole position 9.0 0.75 - 0.5 W2 Hold-down tape margin 3.0 maximum ± 0.5 H0 Height to seating plane 16.0 H1 Maximum component height 32.0 - e Lead end protrusion 1.0 maximum - L Maximum length of snipped lead 11.0 - D0 Feed-hole diameter 4.0 ± 0.2 t Total tape thickness 0.9 maximum - t1 Maximum thickness of tape and wires 1.5 maximum - Notes (1) Cumulative pitch error: ± ≤ 1 mm/20 pitches (2) Obliquity maximum 3° Document Number: 28513 Revision: 07-Jan-10 For technical questions, contact: CDC@vishay.com www.vishay.com 43 D Series Vishay BCcomponents Ceramic Disc Capacitors Class 1 and 2, 500 VDC, General Purpose REEL AND TAPE DATA in millimeters 51 max. 355.6 ± 2.0 28 ± 1.5 8.0 45 max. Reel with capacitors on tape 290 335 50 Ammopack with capacitors on tape www.vishay.com 44 For technical questions, contact: CDC@vishay.com Document Number: 28513 Revision: 07-Jan-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000