D151G33C0GH63J5R

D Series Narrow Tolerance Vishay BCcomponents Ceramic Disc Capacitors Class 1, 100 VDC, Narrow Tolerance FEATURES D D • Low losses • High stability • High capacitance in small size Tangent line Tangent SH line DR • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling F F • Resonant circuit Capacitors with 5 mm (0.20") and 2.5 mm (0.10") lead spacing QUICK REFERENCE DATA DESCRIPTION CLASS 1 (NP0, N750) Voltage (VDC) 100 Min. Capacitance (pF) 1.5 Max. Capacitance (pF) 330 Mounting Through hole DESIGN The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm. The capacitors have inward kinked leads with a spacing of 5 mm (0.20") and 2.5 mm (0.10") and a lead length from 4 mm to 30 mm. Encapsulation is made of phenolic resin. CAPACITANCE RANGE MARKING Marking indicates capacitance value and tolerance in accordance with EIA 198. OPERATING TEMPERATURE RANGE Class 1, - 55 to + 125 °C 1.5 pF to 330 pF; Class 1, at 1 MHz, 1.2 VRMS; 1 kHz, 1 VRMS ± 0.2 VRMS for capacitance values higher than 1000 pF RATED DC VOLTAGE 100 V TEMPERATURE COEFFICIENTS Class 1, NP0; N750 DIELECTRIC STRENGTH 250 % of rated voltage SECTIONAL SPECIFICATIONS Class 1, IEC 60 384-8, INSULATION RESISTANCE AT 100 VDC EIA 198 ≥ 10 000 MΩ CLIMATIC CATEGORY TOLERANCE ON CAPACITANCE Class 1, 55/125/56 ± 0.25 pF; ± 0.5 pF; ± 2 % DISSIPATION FACTOR Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10-4 maximum Class 1, C > 30 pF; ≤ 0.2 % Note • The capacitors meet the essential requirements of EIA 198. Unless stated otherwise all electrical values apply at an ambient temperature of 25 ± 3 °C, at normal atmospheric conditions. www.vishay.com 34 For technical questions, contact: CDC@vishay.com Document Number: 28512 Revision: 07-Jan-10 D Series Narrow Tolerance Ceramic Disc Capacitors Class 1, 100 VDC, Narrow Tolerance Vishay BCcomponents ORDERING INFORMATION, CLASS 1, 100 VDC, KINKED AND STRAIGHT C (PF) TOL. (%) DMAX. (mm) CLEAR TEXT CODE LEAD SPACING F (mm) SH/DRMAX. (1) (mm) 5.0 4.0 D159C20C0KH6.J5R 2.5 1.5 D159C20C0KH6.L2R 5.0 4.0 D189C20C0KH6.J5R 2.5 1.5 D189C20C0KH6.L2R 5.0 4.0 D229C20C0JH6.J5R 2.5 1.5 D229C20C0JH6.L2R 5.0 4.0 D339C20C0JH6.J5R 2.5 1.5 D339C20C0JH6.L2R 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK CLASS 1 NP0 1.5 1.8 2.2 ± 0.25 pF 3.3 4.7 5.0 6.8 10 15 ±2 22 33 47 6.5 68 100 ±2 7.5 150 8.5 220 11.0 5.0 4.0 D479C20C0HH6.J5R 2.5 1.5 D479C20C0HH6.L2R 5.0 4.0 D689C20C0HH6.J5R 2.5 1.5 D689C20C0HH6.L2R 5.0 4.0 D100G20C0GH6.J5R 2.5 1.5 D100G20C0GH6.L2R 5.0 4.0 D150G20C0GH6.J5R 2.5 1.5 D150G20C0GH6.L2R 5.0 4.0 D220G20C0GH6.J5R 2.5 1.5 D220G20C0GH6.L2R 5.0 4.0 D330G20C0GH6.J5R 2.5 1.5 D330G20C0GH6.L2R 5.0 4.0 D470G25C0GH6.J5R 2.5 1.5 D470G25C0GH6.L2R 5.0 4.0 D680G25C0GH6.J5R 2.5 1.5 D680G25C0GH6.L2R 5.0 4.0 D101G29C0GH6.J5R 2.5 1.5 D101G29C0GH6.L2R 5.0 4.0 D151G33C0GH6.J5R 2.5 1.5 D151G33C0GH6.L2R 5.0 4.0 D221G43C0GH6.J5R 2.5 1.5 D221G43C0GH6.L2R 5.0 4.0 D689C20U2JH6.J5R 2.5 1.5 D689C20U2JH6.L2R 5.0 4.0 D100G20U2JH6.J5R 2.5 1.5 D100G20U2JH6.L2R 5.0 4.0 D150G20U2JH6.J5R 2.5 1.5 D150G20U2JH6.L2R 5.0 4.0 D220G20U2JH6.J5R 2.5 1.5 D220G20U2JH6.L2R 5.0 4.0 D330G20U2JH6.J5R 2.5 1.5 D330G20U2JH6.L2R 5.0 4.0 D470G20U2JH6.J5R 2.5 1.5 D470G20U2JH6.L2R 5.0 4.0 D680G25U2JH6.J5R 2.5 1.5 D680G25U2JH6.L2R CLASS 1 N750 6.8 ± 0.25 pF 10 15 5.5 22 ±2 33 47 68 Document Number: 28512 Revision: 07-Jan-10 6.5 For technical questions, contact: CDC@vishay.com www.vishay.com 35 D Series Narrow Tolerance Ceramic Disc Capacitors Class 1, 100 VDC, Narrow Tolerance Vishay BCcomponents ORDERING INFORMATION, CLASS 1, 100 VDC, KINKED AND STRAIGHT C (PF) DMAX. (mm) TOL. (%) CLEAR TEXT CODE LEAD SPACING F (mm) SH/DRMAX. (1) (mm) 5.0 4.0 D101G29U2JH6.J5R 2.5 1.5 D101G29U2JH6.L2R 5.0 4.0 D151G33U2JH6.J5R 2.5 1.5 D151G33U2JH6.L2R 5.0 4.0 D221G39U2JH6.J5R 2.5 1.5 D221G39U2JH6.L2R 5.0 4.0 D331G47U2JH6.J5R 2.5 1.5 D331G47U2JH6.L2R 13TH DIGIT: T = REEL; U = AMMO; 3 = BULK CLASS 1 N 750 100 7.5 150 8.5 ±2 220 10 330 12 Note (1) SH = seated height; DR = run down • 1. Maximum thickness 3.5 mm • Lead style codes refer to inward kinked leads and straight leads PACKAGING DMAX. (mm) PACKAGING QUANTITIES SIZE CODE 5.0 (0.20") 20 6.5 (0.25") 25 7.5 (0.29") 29 8.5 (0.33") 33 10.0 (0.39") 39 11.0 (0.43") 43 12.0 (0.47") 47 BULK REEL AMMO 1000 2500 2000 Note • The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack D P2 Δh P ΔP Δh ΔP H1 W2 H0 W1 W0 W A e P1 Direction of unreeling Ød F P0 D0 t1 Kinked capacitors on tape, lead spacing 5.0 mm (0.2") www.vishay.com 36 For technical questions, contact: CDC@vishay.com detail A Document Number: 28512 Revision: 07-Jan-10 D Series Narrow Tolerance Ceramic Disc Capacitors Class 1, 100 VDC, Narrow Tolerance Vishay BCcomponents DIMENSION OF TAPE DIMENSIONS (mm) SYMBOL PARAMETER D Body diameter 11.0 maximum - d Lead diameter 0.6 ± 0.05 Pitch between capacitors 12.7 ± 1.0 Feed-hole pitch 12.7 ± 0.3 Plane deviation 1.0 maximum - P1 (2) Feed-hole center to lead center 3.85 ± 0.7 P2 (2) Feed-hole center to component center 6.35 ± 1.3 F Lead spacing 5.0 0.6 - 0.4 Δh Component alignment 0 ± 1.0 W Tape width 18.0 1.0 - 0.5 W0 Hold-down tape width 5.0 minimum - W1 Hole position 9.0 0.75 - 0.5 P P0 (1) ΔP NOMINAL TOLERANCE W2 Hold-down tape margin 3.0 maximum - H0 Height to seating plane 16.0 ± 0.5 H1 Maximum component height 32.0 - e Lead end protrusion 1.0 maximum - L Maximum length of snipped lead 11.0 - D0 Feed-hole diameter 4.0 ± 0.2 t Total tape thickness 0.9 maximum - t1 Maximum thickness of tape and wires 1.5 maximum - Notes (1) Cumulative pitch error: ± ≤ 1 mm/20 pitches (2) Obliquity maximum 3° REEL AND TAPE DATA in millimeters 51 max. 355.6 ± 2.0 290 28 ± 1.5 8.0 45 max. 335 50 Reel with capacitors on tape Document Number: 28512 Revision: 07-Jan-10 Ammopack with capacitors on tape For technical questions, contact: CDC@vishay.com www.vishay.com 37 D Series Narrow Tolerance Ceramic Disc Capacitors Class 1, 100 VDC, Narrow Tolerance Vishay BCcomponents TEMPERATURE COEFFICIENT IN ACCORDANCE WITH RS198 C = 0.0 0=-1 M = 1.0 1 = - 10 G = ± 30 H = ± 60 P = 1.5 2 = - 100 J = ± 120 R = 2.2 3 = - 1000 K = ± 250 S = 3.3 5=+1 L = ± 500 T = 4.7 6 = + 10 M = ± 1000 U = 7.5 7 = + 100 N = ± 2500 - 8 = + 1000 - DC16 C (%) 12 8 N750 4 0 NP0 NP0 -4 N750 -8 - 12 - 16 - 60 - 40 - 20 0 20 40 60 80 100 Capacitance change as a function of temperature www.vishay.com 38 For technical questions, contact: CDC@vishay.com 120 140 T (°C) Document Number: 28512 Revision: 07-Jan-10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1