RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
Thick Film Chip Resistors, Military / Established Reliability
MIL-PRF-55342 Qualified, Type RM
FEATURES
• Fully conforms
MIL-PRF-55342
to
the
requirements
of
• Established reliability - verified failure rate; M, P, R, U, S,
V, and T levels
• Construction is sulfur impervious against a high sulfur
environment (ASTM B 809-95 test method)
• 100 % group A screening per MIL-PRF-55342
• Termination style B - tin / lead wraparound over nickel
barrier
LINKS TO ADDITIONAL RESOURCES
• Operating temperature range is -65 °C to +150 °C
Related
Documents
• For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s
RCWPM
Jumper
(Military
M32159)
datasheet
(www.vishay.com/doc?31028)
MATERIAL SPECIFICATIONS
Resistive element
Ruthenium oxide
Encapsulation
Epoxy
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Substrate
96 % alumina
Termination
Solder-coated nickel barrier
Solder finish
Tin / lead solder alloy
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
RCWPM-0502,
RCWPM-0502-98
RCWPM-550,
RCWPM-550-98
RCWPM-5100,
RCWPM-5100-98
RCWPM-5150,
RCWPM-5150-98
RCWPM-7225,
RCWPM-7225-98
RCWPM-575,
RCWPM-575-98
RCWPM-1206,
RCWPM-1206-98
Revision: 10-Mar-17
MIL
MIL-PRF-55342
SPEC. TERM.
STYLE
SHEET
RM0502
RM0505
RM1005
RM1505
RM2208
RM0705
RM1206
01
02
03
04
05
06
07
B
B
B
B
B
B
B
CASE
SIZE
0502
0505
1005
1505
2208
0705
(3)
1206
MAX.
POWER
RESISTANCE
TEMPERATURE
RATING WORKING
TOLERANCE
RANGE
COEFFICIENT (2)
(1)
P70 °C VOLTAGE
±%
± ppm/°C
Ω
W
V
0.05
0.125
0.20
0.15
0.225
0.15
0.25
40
40
75
125
175
50
100
1 to 9.1
2, 5, 10
200, 300
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
Document Number: 31010
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
MIL
MIL-PRF-55342
SPEC. TERM.
STYLE
SHEET
RCWPM-2010,
RCWPM-2010-98
RCWPM-2512,
RCWPM-2512-98
RCWPM-1100,
RCWPM-1100-98
RCWPM-0402,
RCWPM-0402-98
RCWPM-0603,
RCWPM-0603-98
RCWPM-0302,
RCWPM-0302-98
RM2010
RM2512
RM1010
RM0402
RM0603
RM0302
08
B
09
B
10
B
11
B
12
B
13
B
CASE
SIZE
2010
2512
1010
0402
0603
0302
MAX.
POWER
RESISTANCE
TEMPERATURE
RATING WORKING
TOLERANCE
RANGE
COEFFICIENT (2)
P70 °C VOLTAGE (1)
±%
± ppm/°C
Ω
W
V
0.80
1.0
0.50
0.05
0.10
0.04
150
200
75
30
50
15
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
Notes
• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as
follows:
DSCC DRAWING
NUMBER
VISHAY DALE
MODEL
TERM.
POWER RATING
P70 °C
W
RES. RANGE
Ω
RES. TOL.
±%
TEMP. COEF.
± ppm/°C
MAX. WORKING
VOLTAGE (1)
V
07009
RCWP-0201
B
0.05
10 to 46.4
47 to 1M
1, 5
200
100
30
This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg
P x R or maximum working voltage, whichever is less
(1)
Continuous working voltage shall be
(2)
Characteristics: K = ± 100 ppm/°C; L = ± 200 ppm/°C; M = ± 300 ppm/°C
(3)
MIL case size 0705 and EIA case size 0805 are dimensionally the same
Revision: 10-Mar-17
Document Number: 31010
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)
M
5
MIL
STYLE
5
3
CHARACTERISTICS
D55342
applies to
Style 07
(RM1206)
only.
K = 100 ppm
L = 200 ppm
M = 300 ppm
4
2
SPEC.
SHEET
M
0
TERMINATION
STYLE
2
B
1
VALUE AND
TOLERANCE
(see Standard B = pre-tinned
(see
nickel barrier, Tolerance and
Electrical
Specifications wraparound
Multipliers
table)
table)
M55342
applies to
all other
styles.
0
E
FAILURE
RATE
0
R
W
PACKAGING (1)
B
SPECIAL
C = non-ER
TP = tin / lead,
Blank = standard
M = 1.0 %/1000 h
T/R (full)
(dash number)
P = 0.1 %/1000 h
TN = tin / lead,
(up to 1 digits)
R = 0.01 %/1000 h
D = 0.5 %
T/R (full), w/ESD
U = 0.01 %/1000 h (2) UL = tin / lead, T/R
tolerance (3)
S = 0.001 %/1000 h single lot date code
S=
V = 0.001 %/1000 h (2)
S3 = tin / lead,
space level
T = space level
T/R (1000 pieces)
w/option 1 part
SV = tin / lead, T/R marking (-97) (4)
T=
(1000 pieces),
space level (-98)
w/ESD
WB = tin / lead,
2=
waffle tray
option 1
WA = tin / lead,
part marking
waffle tray,
(-20) (4)
3=
w/ESD
WL = tin / lead,
oiptions 2 and 3
waffle tray,
part marking
single lot date code
(-30) (4)
S2 = tin / lead,
T/R (500 pieces)
SU = tin / lead, T/R
(500 pieces), w/ESD
S6 = tin / lead,
T/R (300 pieces)
ST = tin / lead, T/R
(300 pieces), w/ESD
Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)
M55342
M
02
B
10E0
R
WB
MIL
STYLE
CHARACTERISTICS
SPEC. SHEET
TERMINATION
STYLE
VALUE AND
TOLERANCE
FAILURE
RATE
PACKAGING
CODE
Notes
• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543)
(4) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the
ESD pack codes are an optional type of packaging
(5) Failure rates U and V require group A and B inspection ran on each production lot
(6) Add a “D” after the packaging code at the end of the global part number to specify Vishay Dale Thick Film product with a tolerance of 0.5 %
(7) MIL spec option 1, 2, and 3 part marking is not offered for the slash sheet 01, 02, 11, and 13 sizes
RESISTANCE TOLERANCE AND MULTIPLIERS
TOLERANCE
± 0.5 %
±1%
±2%
W
D
Y
E
Z
F
Examples:
38W8 = 38.8 Ω ± 0.5 %
10Y0 = 10 kΩ ± 0.5 %
988W = 988 Ω ± 0.5 %
2Z13 = 2.13 MΩ ± 0.5 %
Revision: 10-Mar-17
MULTIPLIER
VALUE
RANGE (Ω)
±5%
± 10 %
G
J
M
1
1 to 9xx
H
K
N
1000
1K to 9xxK
T
L
P
1 000 000
1M to 22M
11D3 = 11.3 Ω ± 1 %
10E0 = 10 kΩ ± 1 %
332D = 332 Ω ± 1 %
2F21 = 2.21 MΩ ± 1 %
51G0 = 51 Ω ± 2 %
10H0 = 10 kΩ ± 2 %
33H0 = 33 kΩ ± 2 %
22T0 = 22 MΩ ± 2 %
15J0 = 15 Ω ± 5 %
10K0 = 10 kΩ ± 5 %
560K = 560 kΩ ± 5 %
8L20 = 8.2 MΩ ± 5 %
10M0 = 10 Ω ± 10 %
10N0 = 10 kΩ ± 10 %
2P70 = 2.7 MΩ ± 10 %
8P20 = 8.2 MΩ ± 10 %
Document Number: 31010
3
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
D
C
B
A
E
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL
SPEC.
SHEET
A
(LENGTH)
B
(WIDTH)
C
(HEIGHT)
D
(TOP TERM)
E
(BOTTOM TERM)
RCWPM-0502
RM0502
01
0.055 ± 0.005
(1.40 ± 0.13)
0.023 ± 0.003
(0.58 ± 0.08)
0.015 ± 0.003
(0.38 ± 0.08)
0.010 ± 0.005
(0.25 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-550
RM0505
02
0.055 ± 0.005
(1.40 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.010 ± 0.005
(0.25 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-5100
RM1005
03
0.105 ± 0.005
(2.67 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-5150
RM1505
04
0.155 ± 0.005
(3.94 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-7225
RM2208
05
0.230 ± 0.005
(5.84 ± 0.13)
0.075 ± 0.005
(1.91 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-575
RM0705
06
0.080 ± 0.005
(2.03 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.016 ± 0.008
(0.41 ± 0.20)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-1206
RM1206
07
0.125 ± 0.005
(3.18 ± 0.13)
0.063 ± 0.005
(1.60 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-2010
RM2010
08
0.197 ± 0.006
(5.00 ± 0.15)
0.098 ± 0.005
(2.49 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-2512
RM2512
09
0.250 ± 0.005
(6.35 ± 0.13)
0.124 ± 0.005
(3.15 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-1100
RM1010
10
0.105 ± 0.005
(2.67 ± 0.13)
0.100 ± 0.005
(2.54 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-0402
RM0402
11
0.039 ± 0.003
(0.99 ± 0.08)
0.020 ± 0.003
(0.51 ± 0.08)
0.013 ± 0.003
(0.33 ± 0.08)
0.010 ± 0.005
(0.25 ± 0.13)
0.010 ± 0.005
(0.25 ± 0.13)
RCWPM-0603
RM0603
12
0.063 ± 0.005
(1.60 ± 0.13)
0.032 ± 0.005
(0.81 ± 0.13)
0.018 ± 0.005
(0.46 ± 0.13)
0.012 ± 0.005
(0.30 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-0302
RM0302
13
0.034 ± 0.004
(0.86 ± 0.10)
0.021 ± 0.003
(0.53 ± 0.08)
0.013 ± 0.003
(0.33 ± 0.08)
0.007 ± 0.005
(0.18 ± 0.13)
0.008 ± 0.005
(0.20 ± 0.13)
0.024 ± 0.002
(0.61 ± 0.05)
0.012 ± 0.002
(0.30 ± 0.05)
0.009 ± 0.002
(0.23 ± 0.05)
0.006 ± 0.003
(0.15 ± 0.08)
0.006 + 0.002 - 0.004
(0.15 + 0.05 - 0.10)
RCWP-0201
Rated Power in %
DERATING CURVE
120
100
80
60
40
20
0
- 55 - 25
0
25
50
75 100 125 150 175
70 Ambient Temperature in °C
CAGE CODE: 91637 and 2799A (formerly SH903)
Revision: 10-Mar-17
Document Number: 31010
4
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000