DB050180WP15236BJ1

DB 050110, DB 050180 www.vishay.com Vishay Draloric RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic FEATURES • Geometry minimizes inductance • High voltage ratings • High feed-through currents APPLICATIONS Filtering purposes in industrial and medical RF power equipment, where high voltages and high feed-through currents are required. CAPACITANCE RANGE 1.0 nF to 3.0 nF CAPACITANCE TOLERANCE ± 20 %; ± 10 % CERAMIC DIELECTRICS QUICK REFERENCE DATA • R85 (TCC - 750 ppm/K) DESCRIPTION VALUE Ceramic Class 1 • R230 (TCC - 750 ppm/K) R85 R85, R230 RATED VOLTAGE DB 050110 DB 050180 • 15 kVp 15 000 20 000 • 20 kVp Min. Capacitance (pF) 2000 1000 Max. Capacitance (pF) 2000 3000 Ceramic Dielectric Type Voltage (Vp) Mounting Screw terminal DIELECTRIC STRENGTH TEST 200 % of rated AC voltage (50 Hz, 5 minutes) MATERIAL DISSIPATION FACTOR Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. Max. 0.05 % (100 kHz or 300 kHz) Connection terminals: made from copper / brass, silver plated. INSULATION RESISTANCE FINISH OPERATING TEMPERATURE RANGE Capacitor body completely protective lacquered. The contoured insulating rims are additionally glazed. -55 °C to +100 °C Min. 10 000 M (at 25 °C) MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo ACCESSORIES ADDED All feed-through capacitors are supplied with the necessary nuts and washers to make the connection to the conductor rod. Revision: 26-Feb-16 Document Number: 22105 1 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DB 050110, DB 050180 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) RATED CURRENT (ARMS) FEED-THROUGH CURRENT (2) (A) R230 2000 15.0 Max. 200.0 75.0 50.0 70.0 50.0 TYPE DB 050110 DB050110BJ202##BK1 TYPE DB 050180 DB050180WP102##BJ1 1000 R85 DB050180WP152##BJ1 DB050180WP302##BK1 1500 R230 20.0 70.0 3000 100.0 60.0 Notes • ## 14th to 15th digit: capacitance tolerance code ± 20 % = 38, ± 10 % = 36 (1) The surface temperature during operation must not exceed +100 °C (2) DC or low frequency RMS current (< 20 kHz) DIMENSIONS in millimeters (inches) 2 (0.08) Ø 50 (1.97 Dia.) = Ø 50 (1.97 Dia.) 60° 60° Ø 6.3 + 0.3 (0.248 + 0.012 Dia.) Ø 95.0 ± 0.5 (3.740 ± 0.020 Dia.) Ø 85 (3.35 Dia.) Ø 110 ± 2 (4.33 ± 0.08 Dia.) Ø 95.0 ± 0.5 (3.740 ± 0.020 Dia.) Ø 110 ± 2 (4.33 ± 0.08 Dia.) SW14 (0.55 HEX) Revision: 26-Feb-16 M10 thread (both ends) 225 ± 2 (8.86 ± 0.08) 2 (0.08) SW17 (0.67 HEX) = 64 ± 2 (2.52 ± 0.08) 110 ± 2 (4.33 ± 0.08) 6+1 (0.24 + 0.04) DB 050180 180 ± 2 (7.09 ± 0.08) Ø 75 (2.95 Dia.) M8 thread (both ends) 122 ± 2 (4.80 ± 0.08) DB 050110 60° 60° Ø 6.3 + 0.3 (0.248 + 0.012 Dia.) Document Number: 22105 2 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DB 050110, DB 050180 www.vishay.com Vishay Draloric MOUNTING GUIDELINES • The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical tolerances of these components. • The capacitor elements must not be used as a mechanical support for other devices or components. • Use two wrenches when tightening the nuts on both sides of the conductor rod. The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner electrode’s connection. • Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque less than 5 Nm is recommended. DERATING DIAGRAMS DB050110BJ202##BK1 0.14 MHz Ug (kVp) 1000 DB050180WP102##BJ1 Ig (ARMS) Qg (kvar) 1000 2.24 MHz 0.06 MHz Ug (kVp) 100 5.68 MHz Ig (ARMS) Qg (kvar) 100 Ug 100 100 Qg 10 10 Qg 10 Ug 10 1 Ig 1 1 1 0.1 0.01 0.1 0.1 1 10 0.1 0.001 0.1 0.01 0.1 1 Frequency (MHz) Frequency (MHz) DB050180WP152##BJ1 DB050180WP302##BK1 0.04 MHz Ug (kVp) 100 100 Ig 3.79 MHz Ig (ARMS) Qg (kvar) 100 0.03 MHz Ug (kVp) 1000 10 100 Ig (ARMS) Qg (kvar) 1000 1.91 MHz Ug 100 10 10 Qg 100 Ug 10 1 1 Ig 0.1 0.001 10 Qg 1 0.1 0.01 0.1 1 Frequency (MHz) 10 100 Ig 0.1 0.001 1 0.1 0.01 0.1 1 10 100 Frequency (MHz) RELATED DOCUMENTS General Information Revision: 26-Feb-16 www.vishay.com/doc?22071 Document Number: 22105 3 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000