DFNA5-1T5

DFN (Divider) www.vishay.com Vishay Dale Thin Film Dual Flat No Lead Molded Precision Thin Film Divider, Surface Mount Resistor Network FEATURES • 0.8 mm lead pitch • MSL level 1 per J-STD-020 • Low profile 1 mm seated height • Small size 4 mm x 4 mm size 50 % board savings over SOIC packages • Low TCR ± 25 ppm, TCR tracking to ± 5 ppm • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The DFN series of thin film precision dividers surface mount resistor networks offer a wide ratio range that is listed in the standard resistance offering table. The 4 mm x 4 mm 0.8 mm pitch dual flat no lead package feature 50 % savings in board space over traditional SOIC packages. The DFN dividers are ideal for applications that require tight TC tracking and ratio tolerances over temperature. TYPICAL PERFORMANCE TCR TOL. SCHEMATIC 8 R1 7 R2 1 6 R2 2 5 TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 STANDARD RESISTANCE OFFERING (R1/R2) R1 3 ABSOLUTE 4 RATIO R1 R2 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 5:1 10K 2K 2:1 10K 5K STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Passivated nichrome - Pin/Lead Number 8 - Resistance Range 1000  to 100 k per element - TCR: Absolute ± 25 ppm/°C -55 °C to +125 °C TCR: Tracking ± 5 ppm/°C -55 °C to +125 °C Tolerance: Absolute ± 0.1 % +25 °C Tolerance: Ratio ± 0.05 % +25 °C Power Rating: Resistor 100 mW Maximum at +70 °C Power Rating: Package 100 mW x number of resistors Maximum at +70 °C Stability: Absolute R ± 0.05 % 2000 h at +70 °C Stability: Ratio R ± 0.015 % 2000 h at +70 °C Voltage Coefficient Working Voltage < 0.1 ppm/V 100 V max. not to exceed P x R - Operating Temperature Range -55 °C to +125 °C - Storage Temperature Range -55 °C to +150 °C - Noise < - 30 dB - < 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C Thermal EMF Revision: 28-May-15 Document Number: 60110 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DFN (Divider) www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in millimeters 3.500 ± 0.050 Exposed Pad 4.000 ± 0.050 8 0.800 BSC 0.300 ± 0.050 (1) Part Number to be 4 Characters 5 6 7 8 DFNA xxxx MMYY 4.000 ± 0.050 Pin 1 Dot by Marking 5 2.700 ± 0.050 Exposed Pad 1 4 (4 mm x 4 mm) TOP VIEW 4 Date Code (MMYY) 0.400 ± 0.050 3 2 1 Pin 1 Indentification Chamfer 0.300 x 45° 2.400 Ref. BOTTOM VIEW A A Max. Nom. Min. 0.900 0.850 0.800 0.000 - 0.050 SIDE VIEW 0.203 Ref. Notes (1) 100-1 resistance ratio part marking to be 100(2) Contact factory for package outlines for higher pin count or custom configurations MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Ceramic Body Molded epoxy Terminals Copper alloy Plating 100 % matte tin Marking Resistance to Solvents Per MIL-PRF-914 GLOBAL PART NUMBER INFORMATION D F N A 5 - 1 U F GLOBAL MODEL (4 digits) RESISTANCE (3, 4 or 5 digits) PACKAGING DFNA (Lead (Pb)-free) (e3) 2-1 5-1 10-1 20-1 25-1 50-1 100-1 TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (3) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Note Preferred packaging code (3) Revision: 28-May-15 Document Number: 60110 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000