DG2002E
www.vishay.com
Vishay Siliconix
Power-Off Protection, 6 Ω, 1.8 V to 5.5 V,
SPDT Analog Switch (2:1 Multiplexer)
DESCRIPTION
FEATURES
The DG2002E is a high performance single-pole,
double-throw (SPDT) analog switch designed for 1.8 V to
5.5 V operation with a single power rail.
• Low switch on-resistance (6 Ω)
Fabricated with high density CMOS technology, the device
achieves low on resistance of 6 Ω and switch off
capacitance of 7 pF at a 5 V power supply and low power
consumption, and fast switching speeds. Its charge
injection is 1 pC.
• Control logic inputs can go over V+
The DG2002E can handle both analog and digital signals
and permits signals with amplitudes of up to V+ to be
transmitted in either direction. Its control logic inputs can go
over V+ up to 5.5 V. It features break before make switching
performance.
• Latch-up performance exceeds 200 mA per JESD 78
A powered-off protection circuit is built into the switch to
prevent an abnormal current flow from COM pin to V+ during
the power-down condition. Each output pin can withstand
greater than 7 kV (human body model).
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Operation temperature is specified from -40 °C to +85 °C.
The DG2002E is available in the compact SC-70-6L
package.
• +1.8 V to +5.5 V single supply operation
Available
• Powered-off protection
Available
• Low parasitic capacitance, 7 pF at switch off
• Low charge injection, 1 pC
• Break before make switching
• High ESD rating
- 7000 V human body model (JS-001)
- 1000 V charge device model (JS-002)
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
•
•
•
•
Battery powered devices
Instrumentation
Medical equipment
Low voltage data acquisition
• Control and automation
• Consumer and computing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
SC-70
IN
1
6
NO (source1)
V+
2
5
COM
GND
3
4
NC (source2)
H9XXX
Pin 1
Device marking: H9XXX
XXX = Date / lot traceability code
Top view
Device marking: H9
TRUTH TABLE
ORDERING INFORMATION
LOGIC
NC
NO
TEMP. RANGE
PACKAGE
PART NUMBER
0
On
Off
-40 °C to +85 °C
SC-70-6
DG2002EDL-T1-GE3
1
Of
On
Notes
• Logic “0” ≤ 0.8 V
• Logic “1” ≥ 2.4 V
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
PARAMETER
V+, COM, NC, NO, IN reference to GND
Continuous current (any terminal)
Peak current (pulsed at 1 ms, 10 % duty cycle)
Storage temperature
Power dissipation (packages) a
ESD / HBM
ESD / CDM
Latch up
6-pin SC-70 b
JS-001
JS-002
Per JESD78 with
1.5 x voltage clamp
LIMIT
UNIT
-0.3 to 6
± 50
± 200
-65 to +150
250
7000
1000
V
mA
°C
mW
V
200
mA
Notes
a. All leads welded or soldered to PC board
b. Derate 3.1 mW/°C above 70 °C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS (V+ = 5 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 5 V, ± 10 %
VIN = 0.8 V or 2.4 V e
LIMITS
-40 °C to +85 °C
TEMP. a
UNIT
MIN. b
TYP. c
MAX. b
Full
0
-
V+
V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA
Room
Full
-
6
8
9
11
V+ = 5 V, VCOM = 1.5 V, 3.5 V, INO, INC = 10 mA
Room
-
0.4
-
V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA
V+ = 5.5 V,
VNO, VNC = VCOM = 1 V / 4.5 V
V+ = 0 V, VCOM = 5 V, NO/NC open, VIN = GND
V+ = 0 V, VNO, VNC = 5 V, COM open, VIN = GND
Room
Room
Full
Room
Full
Room
Full
Full
Full
-1.5
-4
-1
-4
-1
-4
-
0.04
-
0.2
1.5
4
1
4
1
4
2
2
VIN = 0 V or V+
Full
Full
Full
Full
2.4
-1
6
-
0.8
1
Room
Full
Room
Full
Room
Room
Room
Room
Room
Room
Room
1
-
10
8
1
-78
-77
7
7
13
30
32
24
26
-
pC
Full
-
0.004
1
μA
Analog Switch
Analog signal range d
Drain-source on-resistance d
RDS(on) flatness d
RDS(on) match d
Switch-off leakage current f
VNO, VNC
VCOM
RDS(on)
RDS(on)
flatness
ΔRDS(on)
INO(off),
INC(off)
ICOM(off)
Channel-on leakage current f
Power-down leakage
Digital Control
Input high voltage
Input low voltage
Input capacitance d
Input current
Dynamic Characteristics
ICOM(on)
IPD
VINH
VINL
CIN
IINL or IINH
Turn-on time d
tON
Turn-off time d
tOFF
Break-before-make time d
Charge injection d
Off-isolation d
Crosstalk d
NO, NC off capacitance d
Channel-on capacitance d
Power Supply
Power supply current d
S22-0248-Rev. D, 14-Mar-2022
tBBM
QINJ
OIRR
XTALK
CNO(off)
CNC(off)
CON
I+
V+ = 5.5 V,
VNO, VNC = 1 V / 4.5 V, VCOM = 4.5 V / 1 V
VNO or VNC = 3 V, RL = 300 Ω, CL = 35 pF
CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Ω
RL = 50 Ω, CL = 5 pF, f = 1 MHz
VIN = 0 V or V+, f = 1 MHz
VIN = 0 V or V+
V
Ω
nA
μA
V
pF
μA
ns
dB
pF
Document Number: 76624
2
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (V+ = 3 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 3 V, ± 10 %
VIN = 0.4 V or 2 V e
LIMITS
-40 °C to +85 °C
TEMP. a
UNIT
MIN. b
TYP. c
MAX. b
Full
0
-
V+
Room
-
13
22
Full
-
15
24
-
1.4
-
Analog Switch
Analog signal range d
VNO, VNC
VCOM
Drain-source on-resistance d
RDS(on)
V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA
RDS(on) flatness d
RDS(on)
flatness
V+ = 3 V, VCOM = 0 V to V+, INO, INC = 10 mA
Room
RDS(on) match d
ΔRDS(on)
V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA
Room
-
0.03
0.35
Room
-0.4
-
0.4
Full
-4
-
4
Room
-0.8
-
0.8
Switch-off leakage current f
INO(off),
INC(off)
ICOM(off)
Channel-on leakage current f
ICOM(on)
V+ = 3.3 V,
VNO, VNC = 1 V / 3 V, VCOM = 3 V / 1 V
V+ = 3.3 V,
VNO, VNC = VCOM = 1 V / 3 V
Full
-8
-
8
Room
-0.8
-
0.8
Full
-8
-
8
V
Ω
nA
nA
Digital Control
Input high voltage
VINH
Full
2
-
-
Input low voltage
VINL
Full
-
-
0.4
Input capacitance d
Input current
CIN
IINL or IINH
VIN = 0 V or V+
V
Full
-
6
-
pF
Full
-1
-
1
μA
Room
-
13
34
Full
-
-
37
Room
-
9
20
Full
-
-
22
Room
1
-
-
Room
-
0.9
-
Room
-
-78
-
Room
-
-77
-
Dynamic Characteristics
Turn-on time d
tON
Turn-off time d
tOFF
Break-before-make time d
Charge injection
d
tBBM
QINJ
Off-isolation d
OIRR
Crosstalk d
XTALK
NO, NC off capacitance d
Channel-on capacitance d
VNO or VNC = 2 V, RL = 300 Ω, CL = 35 pF
CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Ω
RL = 50 Ω, CL = 5 pF, f = 1 MHz
CNO(off)
CNC(off)
VIN = 0 V or V+, f = 1 MHz
CON
Room
-
7
-
Room
-
7
-
Room
-
14
-
Full
-
0.002
1
ns
pC
dB
pF
Power Supply
Power supply current d
S22-0248-Rev. D, 14-Mar-2022
I+
VIN = 0 V or V+
μA
Document Number: 76624
3
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (V+ = 2.5 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 2.5 V, ± 10 %
VIN = 0.4 V or 2 V e
LIMITS
-40 °C to +85 °C
TEMP. a
MIN. b
UNIT
TYP. c MAX. b
Analog Switch
Analog signal range d
VNO, VNC
VCOM
Drain-source on-resistance d
RDS(on)
V+ = 2.2 V, VCOM = 1 V, INO, INC = 10 mA
RDS(on) flatness d
RDS(on)
flatness
V+ = 2.5 V, VCOM = 0 V to V+, INO, INC = 10 mA
RDS(on) match d
ΔRDS(on)
V+ = 2.2 V, VCOM = 1.2 V, INO, INC = 10 mA
Switch-off leakage current f
INO(off),
INC(off)
ICOM(off)
Channel-on leakage current f
ICOM(on)
V+ = 2.7 V,
VNO, VNC = 0.5 V / 1.5 V, VCOM = 1.5 V / 0.5 V
V+ = 2.7 V,
VNO, VNC = VCOM = 0.5 V / 1.5 V
Full
0
-
V+
Room
-
23
29.5
Full d
-
24
30.5
Room
-
1.7
-
Room
-
0.1
0.5
Room
-0.2
-
0.2
Full d
-3
-
3
Room
-0.2
-
0.2
Full d
-3
-
3
Room
-0.2
-
0.2
Full d
-3
-
3
V
Ω
nA
nA
Digital Control
Input high voltage
VINH
Full
2
-
-
Input low voltage
VINL
Full
-
-
0.4
Input capacitance d
Input current
CIN
IINL or IINH
VIN = 0 V or V+
V
Full
-
6
-
pF
Full
-1
-
1
μA
Room
-
16
36
Dynamic Characteristics
Turn-on time d
tON
Turn-off time d
tOFF
Break-before-make time d
tBBM
Charge injection d
QINJ
Off-isolation d
OIRR
Crosstalk d
XTALK
NO, NC off capacitance d
Channel-on capacitance d
-
-
38
Room
-
10
19
Full
-
-
21
Room d
1
-
-
Room
-
0.9
-
Room
-
-78
-
Room
-
-77
-
Room
-
7
-
Room
-
7
-
Room
-
14
-
Full
-
-
1
Full
VNO or VNC = 1.5 V, RL = 300 Ω, CL = 35 pF
CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Ω
RL = 50 Ω, CL = 5 pF, f = 1 MHz
CNO(off)
CNC(off)
d
VIN = 0 V or V+, f = 1 MHz
CON
ns
pC
dB
pF
Power Supply
Power supply current d
S22-0248-Rev. D, 14-Mar-2022
I+
VIN = 0 V or V+
μA
Document Number: 76624
4
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (V+ = 2 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 2 V, ± 10 %
VIN = 0.4 V or 1.6 V e
LIMITS
-40 °C to +85 °C
TEMP. a
UNIT
MIN. b
TYP. c
MAX. b
Full
0
-
V+
Room
-
37
45
Full d
-
36
47
Room
-
3
-
Analog Switch
Analog signal range d
VNO, VNC
VCOM
Drain-source on-resistance d
RDS(on)
V+ = 1.8 V, VCOM = 1 V, INO, INC = 10 mA
RDS(on) flatness d
RDS(on)
flatness
V+ = 2 V, VCOM = 0 V to V+, INO, INC = 10 mA
RDS(on) match d
ΔRDS(on)
V+ = 1.8 V, VCOM = 1 V, INO, INC = 10 mA
Switch-off leakage current f
INO(off),
INC(off)
ICOM(off)
Channel-on leakage current f
ICOM(on)
V+ = 2.2 V,
VNO, VNC = 0.5 V / 1.5 V, VCOM = 1.5 V / 0.5 V
V+ = 2.2 V,
VNO, VNC = VCOM = 0.5 V / 1.5 V
Room
-
0.04
0.5
Room
-0.2
-
0.2
Full d
-3
-
3
Room
-0.2
-
0.2
Full d
-3
-
3
Room
-0.2
-
0.2
Full d
-3
-
3
V
Ω
nA
nA
Digital Control
Input high voltage
VINH
Full
1.6
-
-
Input low voltage
VINL
Full
-
-
0.4
Input capacitance d
Input current
CIN
IINL or IINH
VIN = 0 V or V+
V
Full
-
6
-
pF
Full
-1
-
1
μA
Room
-
21
40
Dynamic Characteristics
Turn-on time d
tON
Turn-off time d
tOFF
Break-before-make time d
tBBM
Charge injection d
QINJ
Off-isolation d
OIRR
Crosstalk d
XTALK
NO, NC off capacitance d
Channel-on capacitance d
-
-
42
Room
-
13
20
Full d
-
-
21
Full
VNO or VNC = 1.5 V, RL = 300 Ω, CL = 35 pF
CL = 1 nF, VGEN = 0 V, VNO, VNC = 0 V, RGEN = 0 Ω
RL = 50 Ω, CL = 5 pF, f = 1 MHz
CNO(off)
CNC(off)
d
VIN = 0 V or V+, f = 1 MHz
CON
Room
1
-
-
Room
-
0.8
-
Room
-
-78
-
Room
-
-77
-
Room
-
7
-
Room
-
7
-
Room
-
14
-
Full
-
-
1
ns
pC
dB
pF
Power Supply
Power supply current d
I+
VIN = 0 V or V+
μA
Notes
a. Room = 25 °C, full = as determined by the operating suffix
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
c. Typical values are for design aid only, not guaranteed nor subject to production testing
d. Guarantee by design, nor subjected to production test
e. VIN = input voltage to perform proper function
f. Guaranteed by 5 V leakage testing, not production tested
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
5
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Axis Title
Axis Title
50
V+ = +1.8 V
35
1000
V+ = +2.7 V
1st line
2nd line
30
25
V+ = +3.0 V
100
V+ = +3.3 V
15
V+ = +4.5 V
10
5
20
1000
18
16
14
-40 °C
V+ = +5.5 V
0
1
2
3
4
10
V+ = +2.2 V
IS = 10 mA
6
10
5
10
0
0.5
1
1.5
2.5
VCOM - Analog Voltage (V)
2nd line
RDS(on) vs. VCOM and Supply Voltage
RDS(on) vs. Analog Voltage and Temperature
Axis Title
Axis Title
10000
10000
+85 °C
46
1000
6
100
4
-40 °C
V+ = +4.5 V
IS = 10 mA
36
1000
+25 °C
31
26
21
100
-40 °C
16
V+ = +1.8 V
IS = 10 mA
11
2
6
10
0
41
1
2
3
4
1st line
2nd line
+25 °C
8
2nd line
RON - On-Resistance (Ω)
+85 °C
10
1st line
2nd line
10
0
5
0.5
1
1.5
2
VCOM - Analog Voltage (V)
2nd line
VCOM - Analog Voltage (V)
2nd line
RDS(on) vs. Analog Voltage and Temperature
RDS(on) vs. Analog Voltage and Temperature
Axis Title
Axis Title
18
500
10000
+85 °C
+25 °C
16
1000
1st line
2nd line
14
12
10
100
-40 °C
2nd line
Leakage Current (pA)
0
8
1000
ICOM(ON), VCOM = 4.5 V
-1000
100
INC/NO(OFF), VCOM = 4.5 V, VNC/NO = 1 V
-1500
ICOM(OFF), VCOM = 1 V, VNC/NO = 4.5 V
V+ = +5.5 V
6
10
0.5
ICOM(OFF), VCOM = 4.5 V, VNC/NO = 1 V
-500
V+ = +2.7 V
IS = 10 mA
0
10000
INC/NO(OFF), VCOM = 1 V, VNC/NO = 4.5 V
1st line
2nd line
2nd line
RON - On-Resistance (Ω)
2
VCOM - Analog Voltage (V)
2nd line
12
2nd line
RON - On-Resistance (Ω)
100
12
8
IS = -10 mA
0
+25 °C
22
1st line
2nd line
40
20
10000
+85 °C
24
2nd line
RON - On-Resistance (Ω)
45
2nd line
RON - On-Resistance (Ω)
26
10000
1
1.5
2
2.5
3
ICOM(ON), VCOM = 1 V
-2000
-40
-20
0
20
40
10
60
80
VCOM - Analog Voltage (V)
2nd line
Temperature (°C)
2nd line
RDS(on) vs. Analog Voltage and Temperature
Leakage Current vs. Temperature
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
6
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10000
INC/NO(OFF), VCOM = 1 V, VNC/NO = 3 V
1000
0
-50
-100
-150
ICOM(ON), VCOM = 3 V
INC/NO(OFF), VCOM = 3 V, VNC/NO = 1 V
100
ICOM(OFF), VCOM = 1 V, VNC/NO = 3 V
V+ = +3.3 V
ICOM(ON), VCOM = 1 V
-200
-40
-20
0
20
40
2nd line
Loss, OIRR, XTALK (dB)
ICOM(OFF), VCOM = 3 V, VNC/NO = 1 V
1st line
2nd line
2nd line
Leakage Current (pA)
50
10
60
80
Axis Title
10
Loss
0
-10
-20
-30
-40
XTALK
-50
-60
-70
-80
-90
-100
V+ = +5 V
-110
100K
1M
10M
100
10
100M
1G
Leakage Current vs. Temperature
Insertion Loss, Off-Isolation Crosstalk vs. Frequency
Axis Title
1000
10000
V+ = +5.5 V
VIN = V+ or GND
10000
V+ = +5 V
1000
1.2
1
0.8
100
0.6
0.4
10
1000
1
1st line
2nd line
1.4
2nd line
I+ - Supply Current (μA)
100
1.6
1st line
2nd line
2nd line
I+ - Supply Current (nA)
OIRR
Frequency (Hz)
2nd line
Axis Title
0.1
0.01
100
0.001
0.0001
0.2
0
10
-40
-20
0
20
40
60
80
0.00001
10
100
100
1000
100K
10
10M
1M
Input Switching Frequency (Hz)
2nd line
Supply Current vs. Temperature
Supply Current vs. Input Switching Frequency
Axis Title
Axis Title
20
1st line
2nd line
1000
50.0
100
40.0
V+ = +5 V
VIN = 1.8 V
16
V+ = +5 V, tON
V+ = +3 V, tON
14
1000
12
10
8
V+ = +5 V, tOFF
6
100
V+ = +3 V, tOFF
4
2
30.0
10
-20
10000
18
1st line
2nd line
60.0
2nd line
tON, tOFF - Switching Time (ns)
10000
-40
10K
Temperature (°C)
2nd line
70.0
2nd line
I+ - Supply Current (μA)
1000
Temperature (°C)
2nd line
2
1.8
10000
1st line
2nd line
Axis Title
100
0
20
40
60
80
100
0
10
-50
-30
-10
10
30
50
70
90
Temperature (°C)
2nd line
Temperature (°C)
2nd line
Supply Current vs. Temperature
Switching Time vs. Temperature
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
7
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Axis Title
Axis Title
10000
1000
10000
100
V+ = +2.5 V, tOFF
V+ = +2.0 V, tOFF
V+ = 5 V
10
1000
1
V+ = 3.0 V
0.1
0.01
V+ = 2.5 V
0.001
100
0.0001
0.00001
-30
-10
10
30
50
70
V+ = 2 V
0.000001
10
-50
90
10
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Temperature (°C)
2nd line
VIN (V)
2nd line
Switching Time vs. Temperature
Supply Current vs. Enable Input Voltage
Axis Title
10000
-40 °C to +85 °C
VINL
100
-5.0
1000
-10.0
1st line
2nd line
1000
2nd line
QINJ - Charge Injection (pC)
0
VINH
V+ = 2 V
100
V+ = 2.5 V
-15.0
V+ = 3 V
V+ = 5 V
-20.0
10
1.5
2.5
3.5
4.5
5.5
10
0
1
2
3
4
5
V+ - Supply Voltage (V)
2nd line
VNC/NO - Analog Voltage (V)
2nd line
Switching Threshold vs. Supply Voltage
Charge Injection vs. Analog Voltage
ICOM(PD) Power Down Leakage Current (nA)
ICOM(PD) Power Down Leakage Current (nA)
Axis Title
10000
1st line
2nd line
2nd line
VIN - Switching Threshold (V)
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1st line
2nd line
1000
V+ = +2.5 V, tON
2nd line
I+ - Supply Current (μA)
100
V+ = +2.0 V, tON
1st line
2nd line
2nd line
tON, tOFF - Switching Time (ns)
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
8
V+ = VIN = GND
7
6
5
4
85 °C
3
2
-40 °C
1
25 °C
0
0
2
4
6
2.5
V+ = VIN =GND,
VCOM =+ 3 V
2
1.5
1
0.5
0
-40
-20
0
20
40
60
80
100
VCOM (V)
2nd line
Temperature (°C)
2nd line
Power Down Leakage Current vs VCOM
Power Down Leakage Current vs Temperature
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
8
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
V+
3V
Logic
Input
tf < 20 ns
V+
NO or NC
Switch
tr < 20 ns
50 %
0V
Switch Output
COM
V OUT
0.9 x V OUT
Switch
Output
IN
Logic
Input
RL
300
GND
CL
35 pF
0V
tOFF
tON
Logic “1” = switch on
Logic input waveforms inverted for switches that have
the opposite logic sense.
CL (includes fixture and stray capacitance)
RL
V OUT = V COM
R L + R ON
Fig. 1 - Switching Time
V+
Logic
Input
V+
VNO
VNC
0V
COM
NO
tr < 5 ns
tf < 5 ns
3V
VO
NC
RL
300 Ω
IN
CL
35 pF
GND
VNC = V NO
VO
Switch
Output
90 %
0V
tD
tD
CL (includes fixture and stray capacitance)
Fig. 2 - Break-Before-Make Interval
V+
Rgen
ΔVOUT
V+
NC or NO
COM
VOUT
VOUT
+
IN
Vgen
CL = 1 nF
3V
IN
On
Off
On
GND
Q = ΔVOUT x CL
IN depends on switch configuration: input polarity
determined by sense of switch.
Fig. 3 - Charge Injection
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
9
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
V+
10 nF
V+
COM
IN
COM
0 V, 2.4 V
NC or NO
V NC/NO
Off Isolation = 20 log
RL
GND
VCOM
Analyzer
Fig. 4 - Off-Isolation
V+
10 nF
V+
COM
Meter
IN
0 V, 2.4 V
NC or NO
GND
HP4192A
Impedance
Analyzer
or Equivalent
f = 1 MHz
Fig. 5 - Channel Off / On Capacitance
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
10
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2002E
www.vishay.com
Vishay Siliconix
PRODUCT SUMMARY
Part number
Status code
Configuration
DG2002E
2
SPDT x 2
Single supply min. (V)
1.8
Single supply max. (V)
5.5
Dual supply min. (V)
-
Dual supply max. (V)
-
On-resistance (Ω)
6
Charge injection (pC)
1
Source on capacitance (pF)
13
Source off capacitance (pF)
7
Leakage switch on typ. (nA)
-
Leakage switch off max. (nA)
1.5
-3 dB bandwidth (MHz)
Package
Functional circuit / applications
Interface
Single supply operation
SC-70-6
Multi purpose, instrumentation, medical and healthcare, portable
Parallel
Yes
Dual supply operation
-
Turn on time max. (ns)
32
Crosstalk and off isolation
-77
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?76624.
S22-0248-Rev. D, 14-Mar-2022
Document Number: 76624
11
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024