DG2038DS-T1-E3

New Product DG2037/2038/2039 Vishay Siliconix Low-Voltage, Low rON, Dual SPST Analog Switch DESCRIPTION FEATURES The DG2037/2038/2039 are dual single-pole/single-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, fast switching, low on-resistance (rDS(on): 3.0 Ω at 2.7 V) and small physical size, the DG2037/2038/2039 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. • • • • • • • The DG2037/2038/2039 are built on Vishay Siliconix’s new high density low voltage process. An epitaxial layer prevents latchup. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. Low Voltage Operation (1.8 V to 5.5 V) Low On-Resistance - rDS(on): 3.0 Ω Fast Switching - 12 ns Low Charge Injection - QINJ: 10 pC Low Power Consumption TTL/CMOS Compatible SOT23-8 and MSOP-8 Packages BENEFITS • • • • Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space APPLICATIONS • • • • • Cellular Phones Communication Systems Portable Test Equipment Battery Operated Systems Sample and Hold Circuits FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG2037 DG2037, MSOP-8 DG2037. SOT23-8 NO1 1 8 V+ COM1 2 7 IN1 IN2 3 6 COM2 GND 4 5 NO2 Top View IN1 1 8 NO1 V+ 2 7 COM1 NO2 3 6 IN2 COM2 4 5 GND Top View Device Marking: 2037 Device Marking: E0 TRUTH TABLE - DG2037 Logic Switch 0 Off 1 On Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 1 New Product DG2037/2038/2039 Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG2038/DG2039 DG2038, MSOP-8 NC1 DG2038. SOT23-8 1 COM1 2 IN2 3 GND 4 8 V+ 7 IN1 6 COM2 5 NC2 IN1 1 8 NC1 V+ 2 7 COM1 NC2 3 6 IN2 COM2 4 5 GND Top View Top View Device Marking: 2038 Device Marking: F1 TRUTH TABLE - DG2038 Logic Switch 0 On 1 Off DG2039. SOT23-8 DG2039, MSOP-8 NC 1 1 8 V+ IN1 1 8 NC 1 COM1 2 7 IN1 V+ 2 7 COM1 IN2 3 6 COM2 NO2 3 6 IN2 GND 4 5 NO2 COM2 4 5 GND Top View Top View Device Marking: 2039 Device Marking: F2 TRUTH TABLE - DG2039 Logic Switch-1 0 On Switch-2 Off 1 Off On ORDERING INFORMATION Temp Range Package Part Number DG2037DQ MSOP-8 DG2038DQ DG2039DQ - 40 to 85 °C DG2037DS SOT23-8 DG2038DS DG2039DS www.vishay.com 2 Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Parameter Limit Referenced V+ to GND Unit - 0.3 to 6.0 IN, COM, NC, NOa V - 0.3 to (V+ + 0.3) Continuous Current (Any Terminal) ± 50 Peak Current (Pulsed at 1 ms, 10 % duty cycle) ± 200 Storage Temperature (D Suffix) mA - 65 to 150 Power Dissipation (Packages)b MSOP-8c 320 SOT23-8c 515 °C mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/°C above 25 °C. SPECIFICATIONS (V+ = 3.0 V) Parameter Symbol Test Conditions Otherwise Unless Specified V+ = 3 V, ± 10 %, VIN = 0.4 or 1.5 Ve Limits - 40 to 85 °C Tempa Minb Full 0 Typc Maxb Unit V+ V Analog Switch VNO, VNC VCOM Analog Signal Ranged On-Resistance rON Flatnessd rON Matchd Switch Off Leakage Current rON V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA Room Full 3 rON Flatness V+ = 2.7 V, VCOM = 1.5 to V+, INO, INC = 10 mA Room 0.5 rON Match V+ = 2.7 V, VD = 1.5 to V+, ID = 10 mA Room 0.3 INO(off) INC(off) ICOM(off) Channel-On Leakage Current ICOM(on) V+ = 3.3 V VNO, VNC = 1 V/3 V, VCOM = 3 V/1 V V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V 6 7 Ω Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 1.5 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Capacitanced Cin f = 1 MHz Full IINL or IINH VIN = 0 or V+ Full Turn-On Time tON Turn-Off Time tOFF VNO or VNC = 2.0 V, RL = 300 Ω, CL = 35 pF Figures 1 and 2 Input Current 0.4 8 -1 V pF 1 µA Dynamic Characteristics Charge Injectiond Off-Isolation QINJ d OIRR Crosstalkd XTALK Source-Off Capacitanced Drain-Off Capacitance CL = 1 nF, VGEN = 0 V, RGEN = 0 Ω, Figure 3 RL = 50 Ω, CL = 5 pF, f = 1 MHz CNC/NO(off) d CCOM(off) d Channel-On Capacitance VIN = 0 or V+, f = 1 MHz CON Room Full 22 35 40 Room Full 17 31 35 Room 1 Room - 61 Room - 67 Room 17 Room 19 Room 35 ns pC dB pF Power Supply Power Supply Range V+ Power Supply Current I+ Power Consumption PC Document Number: 72359 S-71035-Rev. B, 21-May-07 2.7 VIN = 0 or V+ 0.02 3.3 V 1.0 µA 3.3 µW www.vishay.com 3 New Product DG2037/2038/2039 Vishay Siliconix SPECIFICATIONS (V+ = 5.0 V) Parameter Symbol Test Conditions Otherwise Unless Specified V+ = 5 V, ± 10 %, VIN = 0.8 or 2.4 Ve Limits - 40 to 85 °C Tempa Minb Full 0 Typc Maxb Unit V+ V Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd rON Matchd Switch Off Leakage Current VNO, VNC VCOM rON V+ = 4.5 V, VCOM = 2.5 V, INO, INC = 10 mA Room Full 2.5 1.6 rON Flatness V+ = 4.5 V, VCOM = 2.5 to V+, INO, INC = 10 mA Room 0.4 rON Match V+ = 4.5 V, ID = 10 mA, VCOM = 2.5 V Room 0.2 INO(off) INC(off) ICOM(off) Channel-On Leakage Current ICOM(on) V+ = 5.5 V VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V V+ = 5.5 V VNO, VNC = VCOM = 1 V/4.5 V 5 6 Ω Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 2.4 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Cin f = 1 MHz Full IINL or IINH VIN = 0 or V+ Full Turn-On Timed tON Turn-Off Timed tOFF VNO or VNC = 3 V, RL = 300 Ω, CL = 35 pF Figures 1 and 2 Charge Injectiond QINJ Off-Isolationd OIRR Crosstalkd XTALK Input Capacitance Input Current 0.8 8 -1 V pF 1 µA Dynamic Characteristics Source-Off Capacitanced Drain-Off Capacitanced Channel-On Capacitanced CL = 1 nF, VGEN = 0 V, RGEN = 0 Ω, Figure 3 RL = 50 Ω, CL = 5 pF, f = 1 MHz CNC/NO(off) CCOM(off) VIN = 0 or V+, f = 1 MHz CON Room Full 19 30 35 Room Full 12 22 30 Room 1 Room - 61 Room - 67 Room 15 Room 17 Room 35 ns pC dB pF Power Supply Power Supply Range V+ Power Supply Current I+ Power Consumption PC 4.5 VIN = 0 or V+ 0.02 5.5 V 1.0 µA 5.5 µW Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. f. Not production tested. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 4 Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 8 4.0 6 5 4 V+ = 2.7 V 3 V+ = 2.7 V 85 °C 25 °C 3.5 V+ = 1.8 V r ON - On-Resistance (Ω) r ON - On-Resistance (Ω) 7 V+ = 3.3 V 2 2.5 V+ = 5.5 V 2.0 85 °C 1.5 25 °C - 40 °C 1.0 V+ = 5.5 V 1 - 4 0 °C 3.0 0 0.5 0 1 2 3 4 5 0 2 3 4 5 6 VCOM - Analog Voltage (V) VCOM - Analog Voltage (V) rON vs. Analog Voltage and Temperature rON vs. VCOM Supply Voltage 10000 100 mA V+ = 5 V VIN = 0 V V+ = 5 V 10 mA 1000 I+ - Supply Current (A) I+ - Supply Current (nA) 1 100 10 1 mA 100 µA 10 µA 1 µA 100 nA 1 - 40 10 nA - 20 0 20 40 60 80 100 10 100 Temperature (°C) 10 K 100 K 1M 10 M Supply Current vs. Input Switching Frequency Supply Current vs. Temperature 150 1000 V+ = 3.3 V T = 25 °C V+ = 5.5 V 100 Leakage Current (pA) Leakage Current (pA) 1K Input Switching Frequency (Hz) 100 ICOM(off) ICOM(on) 10 INO(off) INC(off) 50 ICOM(on) 0 ICOM(off) - 50 - 100 1 - 50 - 25 0 25 50 75 Temperature (°C) Leakage Current vs. Temperature Document Number: 72359 S-71035-Rev. B, 21-May-07 100 - 150 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VCOM - Analog Voltage Leakage vs. Analog Voltage www.vishay.com 5 New Product DG2037/2038/2039 Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted t ON, 10 25 LOSS tON, V+ = 3.3 V Loss, OIRR, XTALK (dB) t OFF - Switching Time (ns) 30 20 tON, V+ = 5.5 V tOFF, V+ = 3.3 V 15 tOFF, V+ = 5.5 V 10 - 10 - 30 RL = 50 Ω v+ = 5 v v+ = 3 v OIRR - 50 - 70 5 XTALK, V+ = 3.3 V XTALK, V+ = 5.5 V 0 - 60 - 40 - 20 0 20 40 60 80 - 110 100 100 120 140 1K 10 K Temperature (°C) 1M Frequency (Hz) Switching Time vs. Temperature and Supply Voltage Insertion Loss, Off-Isolation Crosstalk vs. Frequency 2.0 12 1.8 10 Q at Source V+ = 3 V 1.6 Q - Charge Injection (pC) V T - Switching Threshold (V) 100 K 1.4 1.2 1.0 0.8 0.6 8 V+ = 5.5 V 6 4 2 0 0.4 - 2 0.2 - 4 0.0 V+ = 1.8 V - 6 0 1 2 3 4 5 V+ - Supply Voltage (V) Switching Threshold vs. Supply Voltage www.vishay.com 6 6 0 1 2 3 4 5 6 VCOM - Analog Voltage (v) Charge Injection vs. Analog Voltage Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input 50 % VINL V+ Switch Output COM NO or NC Switch Input tr < 5 ns tf < 5 ns VOUT 0.9 x VOUT Switch Output IN Logic Input CL 35 pF RL 300 Ω GND 0V tOFF tON Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM RL R L + R ON Figure 1. Switching Time V+ ΔVOUT V+ Rgen COM VOUT NC or NO VOUT + IN Vgen IN CL = 1 nF On Off On GND Q = ΔVOUT x CL VIN = 0 - V+ IN depends on switch configuration: input polarity determined by sense of switch. Figure 2. Charge Injection V+ 10 nF V+ 10 nF V+ NC or NO V+ IN 0 V, 2.4 V COM Meter COM IN 0 V, 2.4 V RL GND NC or NO GND Analyzer HP4192A Impedance Analyzer or Equivalent f = 1 MHz V COM Off Isolation = 20 log V NO/ NC Figure 3. Off-Isolation Figure 4. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?72359. Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1