DG2511, DG2512, DG2513
Vishay Siliconix
Low-Voltage, Low RON, Single Analog Switch
In miniQFN-6 Package
DESCRIPTION
The DG2511, DG2512, DG2513 are low on-resistance,
single-pole/double-throw
or
single-pole/single-throw
monolithic CMOS analog switch. It is designed for low
voltage applications. The DG2511, DG2512, DG2513 are
ideal for portable and battery powered equipment, requiring
high performance and efficient use of board space. In
additional to the low on-resistance (1.3 at 2.7 V).
The DG2511 is an SPDT and the DG2512, DG2513 are
SPST. The switch conducts equally well in both directions
when on, and blocks up to the power supply level when off.
FEATURES
• Low voltage operation (1.8 V to 5.5 V)
•
•
•
•
•
BENEFITS
•
•
•
•
•
The DG2511, DG2512, DG2513 are built on Vishay
Siliconix’s low voltage JI5L process. An epitaxial layer
prevents latchup.
Break-before-make is guaranteed.
The DG2511, DG2512, DG2513 represents a breakthrough
in packaging development for analog switching products.
The miniQFN-6 package (1.2 x 1 mm).
Low on-resistance - RON: 1.3 at 2.7 V
Low charge injection
RoHS
COMPLIANT
Latch-up current > 300 mA (JESD78A)
miniQFN-6 package (1.2 x 1 mm)
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Reduced power consumption
Simple logic interface
High accuracy
Reduce board space
Guaranteed 2 V operation
APPLICATIONS
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product with
the lead (Pb)-free device terminations. For analog switching
products manufactured with NiPdAu device terminations, the
lead (Pb)-free "-E4" suffix is being used as a designator.
•
•
•
•
•
•
•
Cellular phones
Communication systems
Portable test equipment
Battery operated systems
Sample and hold circuits
ADC and DAC applications
Low voltage data acquisition systems
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG2511
miniQFN-6
DG2513
miniQFN-6
DG2512
miniQFN-6
NO
1
6
IN
NC
1
6
IN
NO
1
6
IN
GND
2
5
V+
GND
2
5
V+
GND
2
5
V+
NC
3
4
COM
NC
3
4
COM
NO
3
4
COM
Top View
Top View
Top View
TRUTH TABLE
Ax
Pin 1
Device Marking: Ax for DG2511
Bx for DG2512
Cx for DG2513
x = Date/Lot Traceability Code
Note: Pin 1 has long lead
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
Logic
NC
0
On
NO
Off
1
Off
On
COMMERCIAL ORDERING INFORMATION
Temp Range
Package
- 40 °C to 85 °C
miniQFN-6
Lead (Pb)-free
with Tape and Reel
For more information please contact: analogswitchtechsuoort@vishay.com
Part Number
DG2511DN-T1-E4
DG2512DN-T1-E4
DG2513DN-T1-E4
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Reference V+ to GND
Unit
- 0.3 to + 6
V
- 0.3 to (V+ + 0.3)
IN, COM, NC, NOa
Continuous Current (NO, NC, COM pins)
± 150
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
± 300
Storage Temperature
D Suffix
Power Dissipation (Packages)b
miniQFN-6c
mA
- 65 to 150
°C
160
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 2 mW/°C above 70 °C.
SPECIFICATIONS (V+ = 3 V)
Test Conditions
Otherwise Unless Specified
Parameter
Symbol
V+ = 3 V, ± 10 %,VIN = 0.4 V or 2 Ve
Limits
- 40 °C to 85 °C
Temp.a
Min.b
Full
0
Typ.c
Max.b
Unit
V+
V
1.7
1.9
0.15
Analog Switch
VNO, VNC,
VCOM
Analog Signal Ranged
RON
On-Resistance
RON
RON Match
RON Flatness
Switch Off Leakage Current
f
RON
Flatness
INO(off)
INC(off)
ICOM(off)
Channel-On Leakage Currentf
ICOM(on)
V+ = 2.7 V, VCOM = 0.5 V/1.5 V
INO, INC = 100 mA
V+ = 3.3 V,
VNO, VNC= 1 V/3 V, VCOM = 3 V/1 V
V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V
Room
Full
Room
1.4
Room
0.3
Room
Full
-2
- 20
2
20
Room
Full
Room
Full
-2
- 20
-2
- 20
2
20
2
20
1.6
Digital Control
Input High Voltage
VINH
Full
Input Low Voltage
VINL
Full
Input Capacitance
Input Current
Cin
IINL or IINH
0.4
0.4
Full
4
VIN = 0 or V+
Full
V+ = 2.7 V, VNO or VNC = 1.5 V,
RL = 50 , CL = 35 pF
Room
Full
Room
Full
Room
CL = 1 nF, VGEN = 0 V, RGEN = 0
Room
3
RL = 50 , CL = 5 pF, f = 1 MHz
Room
- 58
Room
- 64
Room
21
Room
61
1
nA
V
pF
1
µA
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
Break-Before-Make Time
tBBM
Charge Injectiond
QINJ
Off-Isolationd
OIRR
Crosstalkd
XTALK
NO, NC Off Capacitanced
Channel-On Capacitanced
CNO(off)
CNC(off)
CON
Power Supply
Power Supply Range
V+
Power Supply Current
I+
www.vishay.com
2
VIN = 0 or V+, f = 1 MHz
18
7
1
For more information please contact: analogswitchtechsuoort@vishay.com
ns
12
1.8
VIN = 0 or V+
43
49
32
34
0.01
pC
dB
pF
5.5
V
1
µA
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
SPECIFICATIONS (V+ = 5 V)
Test Conditions
Otherwise Unless Specified
Parameter
Symbol
V+ = 5 V, ± 10 %, VIN = 0.6 V or 1.8 Ve
Limits
- 40 °C to 85 °C
Temp.a
Min.b
Full
0
Typ.c
Max.b
Unit
V+
V
1.3
1.45
0.15
Analog Switch
Analog Signal Ranged
On-Resistance
VNO, VNC,
VCOM
RON
RON
RON Match
RON Flatness
Switch Off Leakage Current
RON
Flatness
INO(off)
INC(off)
ICOM(off)
Channel-On Leakage Current
ICOM(on)
V+ = 4.5 V, VCOM = 0.5 V/2.5 V,
INO, INC = 100 mA
V+ = 5.5 V,
VNO, VNC= 1 V/4.5 V, VCOM = 4.5 V/1 V
V+ = 5.5 V, VNO, VNC = VCOM = 1 V/4.5 V
Room
Full
Room
1
Room
0.3
Room
Full
-2
- 20
2
20
Room
Full
Room
Full
-2
- 20
-2
- 20
2
20
2
20
1.8
Digital Control
Input High Voltage
VINH
Full
Input Low Voltage
VINL
Full
Input Capacitance
Input Current
Cin
IINL or IINH
0.4
0.6
Full
4
VIN = 0 or V+
Full
VNO or VNC = 2.5 V, RL = 50 , CL = 35 pF
Room
Full
Room
Full
Room
CL = 1 nF, VGEN = 0 V, RGEN = 0
Room
14
Room
- 58
Room
- 64
Room
19
Room
61
1
nA
V
pF
1
µA
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
Break-Before-Make Time
tBBM
Charge Injectiond
QINJ
Off-Isolation
d
Crosstalkd
NO, NC Off Capacitanced
Channel-On Capacitanced
OIRR
XTALK
CNO(off)
CNC(off)
RL = 50, CL = 5 pF, f = 1 MHz
VIN = 0 or V+, f = 1 MHz
CON
Power Supply
Power Supply Range
V+
Power Supply Current
I+
VIN = 0 or V+
11
6
1
35
39
31
33
ns
5
1.8
0.01
pC
dB
pF
5.5
V
1
µA
Notes:
a. Room = 25 °C, Full = as determined by the operating suffix.
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
c. Typical values are for design aid only, not guaranteed nor subject to production testing.
d. Guarantee by design, nor subjected to production test.
e. VIN = input voltage to perform proper function.
f. Guaranteed by 5 V leakage testing, not production tested.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
For more information please contact: analogswitchtechsuoort@vishay.com
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100000
3.0
V+ = 1.8 V
2.0
V+ = 2.7 V
V+ = 3.0 V
V+ = 4.5 V
V+ = 3.6 V V+ = 5.0 V
V+ = 5.5 V
1.5
V+ = 5.5 V
VIN = 0 V
10000
V+ = 2.0 V
I+ - Supply Current (pA)
R ON - On-Resistance ()
2.5
1.0
1000
100
10
0.5
T = 25 °C
IS = 100 mA
0.0
0
1
2
3
4
1
- 60
5
0
20
40
60
80
Temperature (°C)
Supply Current vs. Temperature
100
10 mA
V+ = 3.0 V, IS = 100 mA
+ 85 °C
+ 25 °C
- 40 °C
1 mA
I+ - Supply Current (A)
2.5
R ON - On-Resistance ()
- 20
RON vs. VCOM and Supply Voltage
3.0
2.0
1.5
1.0
0.5
100 µA
10 µA
V+ = 5.5 V
1 µA
100 nA
10 nA
1 nA
0.0
0
0.5
1
1.5
2
2.5
3
10
100
1K
10K
100K
1M
10M
VCOM - Analog Voltage (V)
Input Switching Frequency (Hz)
RON vs. Analog Voltage and Temperature
Supply Current vs. Input Switching Frequency
3.0
10000
V+ = 5.5 V
V+ = 5.0 V, IS = 100 mA
2.5
+ 85 °C
1000
+ 25 °C
2.0
Leakage Current (pA)
R ON - On-Resistance ()
- 40
VCOM - Analog Voltage (V)
- 40 °C
1.5
1.0
100
ICOM(off)
ICOM(on)
INC/NO(on)
10
0.5
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
VCOM - Analog Voltage (V)
RON vs. Analog Voltage and Temperature
www.vishay.com
4
5.0
1
- 60
- 40
- 20
0
20
40
60
80
100
Temperature (°C)
Leakage Current vs. Temperature
For more information please contact: analogswitchtechsuoort@vishay.com
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
500
2.0
400
Leakage Current (pA)
200
ICOM(off)
I NO(off) /I NC(off)
100
VT - Switching Threshold (V)
V+ = 5.5 V
300
0
- 100
I COM(on)
- 200
- 300
1.5
1.0
0.5
- 400
- 500
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
1
2
VCOM - Analog Voltage (V)
Leakage vs. Analog Voltage
4
5
6
Switching Threshold vs. Supply Voltage
25
20
10
20
tON V+ = 2.7 V
Q - Charge Injection (pC)
tON, tOFF, - Switchint Time (ns)
3
V+ - Supply Voltage (V)
tON V+ = 4.5 V
15
10
tOFF V+ = 2.7 V
V+ = 2.0 V
V+ = 3.0 V
0
- 10
V+ = 5.0 V
- 20
- 30
- 40
5
- 50
tOFF V+ = 4.5 V
0
- 60
- 40
- 20
0
20
40
60
80
100
Temperature (°C)
- 60
0.0
1.0
2.0
3.0
4.0
5.0
VNO/NC - Analog Voltage (V)
Switching Time vs. Temperature and Supply Voltage
Charge Injection vs. Analog Voltage
10
LOSS
0
LOSS, OIRR, XTLAK (dB)
- 10
- 20
OIRR
- 30
- 40
- 50
- 60
X TALK
V+ = 3.0 V
RL = 50 Ω
- 70
- 80
100 K
1M
10 M
100 M
1G
Frequency (Hz)
Insertion Loss, Off-Isolation, Crosstalk vs.
Frequency
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
For more information please contact: analogswitchtechsuoort@vishay.com
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
TEST CIRCUITS
V+
+3V
Logic
Input
50 %
V+
0V
Switch Output
COM
NO or NC
Switch
Input
tr < 5 ns
tf < 5 ns
VOUT
0.9 x V OUT
Switch
Output
IN
Logic
Input
RL
50 Ω
GND
CL
35 pF
0V
tON
tOFF
0V
Logic "1" = Switch On
Logic input waveforms inverted for switches that have
the opposite logic sense.
CL (includes fixture and stray capacitance)
VOUT = VCOM
RL
R L + R ON
Figure 1. Switching Time
V+
Logic
Input
V+
VNO
VNC
tr < 5 ns
tf < 5 ns
0V
COM
NO
3V
VO
NC
RL
50 Ω
IN
CL
35 pF
GND
VNC = V NO
VO
Switch
Output
90 %
0V
tD
tD
CL (includes fixture and stray capacitance)
Figure 2. Break-Before-Make Interval
V+
Rgen
ΔVOUT
V+
VOUT
NC or NO
COM
VOUT
+
IN
IN
Vgen
CL
3V
On
Off
On
GND
Q = ΔVOUT x CL
IN depends on switch configuration: input polarity
determined by sense of switch.
Figure 3. Charge Injection
www.vishay.com
6
For more information please contact: analogswitchtechsuoort@vishay.com
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG2511, DG2512, DG2513
Vishay Siliconix
TEST CIRCUITS
V+
10 nF
V+
COM
IN
COM
0 V, 2.4 V
NC or NO
VNC/ NO
Off Isolation = 20 log
RL
GND
VCOM
Analyzer
Figure 4. Off-Isolation
V+
10 nF
V+
COM
Meter
IN
0 V, 2.4 V
Impedance
Analyzer
NC or NO
GND
f = 1 MHz
Figure 5. Channel Off/On Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?74454.
Document Number: 74454
S12-1989–Rev. D, 20-Aug-12
For more information please contact: analogswitchtechsuoort@vishay.com
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
MINI QFN-6L CASE OUTLINE
DIM
MILLIMETERS
INCHES
MIN.
NAM.
MAX.
MIN.
NAM.
MAX.
A
0.50
0.55
0.60
0.0197
0.0217
0.0236
A1
0.00
-
0.05
0.000
-
0.002
b
0.15
0.20
0.25
0.006
0.008
0.010
c
0.15 REF
0.006 REF
D
1.15
1.20
1.25
0.045
0.047
0.049
E
0.95
1.00
1.05
0.037
0.039
0.041
e
0.40 BSC
0.016 BSC
L
0.30
0.35
0.40
0.012
0.014
0.016
L1
0.40
0.45
0.50
0.016
0.018
0.020
ECN T-07039-Rev. A, 12-Feb-07
DWG: 5958
Document Number: 74497
12-Feb-07
www.vishay.com
1
PAD Pattern
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR MINI QFN 6L
6 x 0.42
0.40
Pitch
6 x 0.22
1.07
Mounting Footprint
Dimensions in mm
Document Number: 66556
Revision: 05-Mar-10
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
