DG2524DN-T1-GE4

DG2523, DG2524 www.vishay.com Vishay Siliconix 0.4 , Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION FEATURES The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs that each controls a pair of single-pole double-throw (SPDT). It is also known as a two-channel double-pole double-throw (DPDT) configuration. The DG2524 has an EN pin to enable the device when the logic is low. • 1.8 V to 5.5 V single supply operation • Low resistance: 0.4  / typ. at 2.7 V • Highly flat and matched Ron • Low parasitic capacitance, Con = 26 pF, Coff = 14.5 pF • Typical switch off leakage of 40 pA The parts are designed to operate from 1.8 V to 5.5 V single power rail. All switches conduct equally well in both directions, offering rail to rail signal witching and can be used both as multiplexers as well as de-multiplexers. The parts feature low control logic threshold. Break-before-make switching is guaranteed. • High bandwidth: 310 MHz The DG2523 and DG2524 exhibit low parasitic capacitance, low leakage, and highly matched low and flat switch resistance over the full signal range characters that are important for precision analog designs. • Latch up current: 300 mA (JESD78) The high bandwidth and excellent total harmonic distortion (THD) performance make them ideal for both analog and digital signal switching in space constrain applications requiring high performance and efficient use of board space. The DG2523 and DG2524 come in Pb-free QFN-16 package of 3 mm x 3 mm. BENEFITS • Low and flat resistance • Excellent total harmonic distortion • Low parasitic capacitance • Low voltage control interface • Guaranteed logic high 1.2 V, logic low 0.3 V • Break before make switching • Signal swing over V+ capable • Power down protection • ESD/HBM: > 6 kV • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • • • • • • Automatic test equipment Data acquisition systems Meters and instruments Medical and healthcare systems Communication systems Audio and video signal routing Battery powered systems Computer peripherals Data storage Relay replacement FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2523DN QFN-16 (3 x 3) COM1 NO1 16 15 DG2524DN QFN-16 (3 x 3) V+ NC4 14 13 COM1 NO1 16 NC1 1 12 COM4 IN1, IN2 2 11 NO4 NC1 1 IN 2 15 V+ NC4 14 13 12 COM4 11 NO4 Control NO2 3 10 IN3, IN4 COM2 4 9 NC3 5 6 NC2 GND 7 NO3 COM3 Top View S16-2128-Rev. A, 17-Oct-16 8 NO2 3 10 EN COM2 4 9 NC3 5 6 NC2 GND 7 8 NO3 COM3 Top View Document Number: 67894 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix TRUTH TABLE DG2523 INx TRUTH TABLE DG2524 NC1, 2, 3, and 4 NO1, 2, 3, and 4 EN LOGIC IN NC1, 2, 3, and 4 0 On Off 1 Off On NO1, 2, 3, and 4 1 x Off Off 0 0 On Off 0 1 Off On ORDERING INFORMATION TEMPERATURE RANGE -40 °C to +85 °C lead (Pb)-free PACKAGE QFN-16 (3 mm x 3 mm) PART NUMBER MIN. ORDER / PACK. QUANTITY DG2523DN-T1-GE4 Tape and reel, 2500 units DG2524DN-T1-GE4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER Reference to GND SYMBOL LIMIT V+ -0.3 to +6 IN, COM, NC, NO a -0.3 to (V+ + 0.3) Current (any terminal except NO, NC, or COM) ± 300 Peak current (pulsed at 1 ms, 10 % duty cycle) ± 500 Storage temperature (D suffix) Power dissipation (packages) b V 30 Continuous current (NO, NC, or COM) Package solder reflow conditions d UNIT -65 to +150 QFN-16 250 QFN-16 c 1385 mA °C mW Notes a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 17.3 mW/°C above 70 °C. d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-2128-Rev. A, 17-Oct-16 Document Number: 67894 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix SPECIFICATIONS (V+ = 3 V) PARAMETER SYMBOL TEST CONDITIONS unless otherwise specified V+ = 3 V, ± 10 %, VIN = 0.5 V or 1.4 V e LIMITS -40 °C to +85 °C TEMP. a UNIT MIN. b TYP. c MAX. b Full 0 - V+ Room - 0.40 0.55 Full - - 0.65 Full - 0.03 0.08 Analog Switch Analog signal range d VNO, VNC, VCOM On-resistance RON RON flatness d RON flatness RON RON match d INO(off), INC(off) Switch off leakage current V+ = 2.7 V, VCOM = 0 to 2.7 V, INO, INC = 100 mA V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 100 mA V+ = 5.5 V, VNO, VNC = 0.5 V / 4 V, VCOM = 4 V / 0.5 V ICOM(off) Channel-on leakage current ICOM(on) V+ = 5.5 V, VNO, VNC = VCOM = 0.5 V / 4 V V  Room - 0.05 - Room -1 0.04 1 Full -5 - 5 Room -1 0.17 1 Full -5 - 5 Room -1 0.17 1 Full -5 - 5 1.2 - - - - 0.3 Full - 5 - pF Full -1 - 1 μA Room - 38 60 Full - - 70 Room - 0.43 1 Full - - 3 Full 1 - - nA Digital Control Input high voltage VINH Input low voltage VINL Input capacitance CIN IINL or IINH Input current Full VIN = 0 or V+ V Dynamic Characteristics Turn-on time tON VNO or VNC = 1.5 V, RL = 50 , CL = 35 pF Turn-off time tOFF Break-before-make time Charge injection d -3 dB bandwidth Off-isolation d Crosstalk d, f Total harmonic distortion plus noise NO, NC off capacitance d Channel-on capacitance d td μs QINJ CL = 1 nF, VGEN = 1.5 V, RGEN = 0  Room - -19 - pC BW RL = 50 , CL = 5 pF Room - 310 - MHz - -82 - OIRR RL = 50 , CL = 5 pF, f = 100 kHz RL = 50 , CL = 5 pF, f = 1 MHz - -55 - RL = 50 , CL = 5 pF, f = 100 kHz - -89 - - -61 - - -100 - CNO(off) - 14.5 - CNC(off) - 14.5 - - 26 - - 26 - 1.8 - 5.5 V - 29 60 μA XTALK THD + N CNO(on) RL = 50 , CL = 5 pF, f = 1 MHz Room 2.5 V, signal peak to peak voltage RL = 32 , f = 1 kHz f = 1 MHz Room CNC(on) dB pF Power Supply Power supply range V+ Power supply current I+ VIN = 0 or V+ Full Notes a. Room = 25 °C, full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. VIN = input voltage to perform proper function. f. Crosstalk measured between channels. S16-2128-Rev. A, 17-Oct-16 Document Number: 67894 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 0.60 TA = 25 °C IS = 100 mA 0.58 0.56 RON - On-Resistance (Ω) 0.54 0.52 RON - On-Resistance (Ω) V+ = +1.8 V V+ = +2.3 V 0.50 0.48 V+ = +3.0 V 0.46 V+ = +3.6 V 0.44 0.42 0.40 0.38 V+ = +5.0 V 0.36 0.34 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VCOM - Analog Voltage (V) 4.5 0.56 0.54 0.52 0.50 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 5.0 V+ = +3.0 V IS = 100 mA +85 °C +25 °C -40 °C 0.0 0.5 1.0 1.5 2.0 VCOM - Analog Voltage (V) 3.0 RON vs. Analog Voltage and Temperature RON vs. VCOM and Supply Voltage 1000 60 T = 25 55 oC V+ = +3 V IN = 0 V I+ - Supply Current (nA) 50 I+ - Supply Current (μA) 2.5 V+ = 5 V 100 V+ = 3 V 45 40 35 30 25 20 15 10 5 V+ = 1.8 V 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 3.5 4.0 4.5 5.0 -40 -20 0 VIN - Input Voltage (V) 40 60 80 100 Temperature (°C) Supply Current vs. Input Voltage Supply Current vs. Temperature 1400 100 90 TA = 25 °C VIN = 0 V 80 V+ = 3.3 V VCOM = 0.5 V VNO/NC = 2.8 V 1200 1000 INO/NC(OFF) 70 Leakage (pA) I+ - Supply Current (μA) 20 60 50 40 800 ICOM(ON) 600 400 200 30 ICOM(OFF) 0 20 10 -200 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 V+ - Supply Voltage (V) Supply Current vs. Supply Voltage S16-2128-Rev. A, 17-Oct-16 5.5 -40 -20 0 20 40 60 80 100 Temperature (oC) Leakage Current vs. Temperature Document Number: 67894 4 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 100 100 V+ = 3.3 V 80 ICOM(OFF) 40 Switching Speed (μs) Leakage Current (pA) 60 20 0 INO/NC(OFF) -20 ICOM(ON) -40 tON, V+ = 1.8 V 10 tON, V+ = 3 V tOFF, V+ = 1.8 V tON, V+ = 5.5 V tOFF, V+ = 3 V 1 -60 -80 -100 tOFF, V+ = 5.5 V 0.1 0 0.5 1 1.5 2 2.5 3 3.5 -40 -20 0 VCOM - Drain Voltage (V), VNO/NC = -VCOM Leakage Current vs. Drain Voltage 80 100 0.85 VTH - Switching Threshold (V) Loss -10 Loss, OIRR, XTALK (dB) 60 0.90 0 -20 -40 40 Switching Time vs. Temperature 10 -30 20 Temperature (°C) OIRR V+ = +3 V RL = 50 Ω XTALK -50 -60 -70 -80 VIH 0.75 VIL 0.70 0.65 0.60 0.55 -90 -100 100K 0.80 0.50 1M 10M 100M 1G 1.5 2 2.5 3 3.5 4 4.5 5 Frequency (Hz) V+ - Supply Voltage (V) Insertion Loss, Off-Isolation Crosstalk vs. Frequency Switching Threshold vs. Supply Voltage S16-2128-Rev. A, 17-Oct-16 5.5 Document Number: 67894 5 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 0 V+ = 3 V QINJ - Charge Injection (pC) -5.0 -10.0 -15.0 -20.0 -25.0 -30.0 -35.0 -40.0 0 0.5 1 1.5 2 2.5 3 VNO/NC - Analog Voltage (V) Charge Injection vs. Analog Voltage 40 70 V+ = 3 V 65 T = 25 °C Vanalog = 1/2 V+ 60 CCOM(ON) 30 50 tON 45 Capacitance (pF) Switching Speed (μs) 55 35 40 35 30 25 20 25 20 15 10 15 CNO/NC(OFF) tOFF 10 5 5 0 0 1.5 2 2.5 3 3.5 4 4.5 V+ - Supply Voltage (V) 5 Switching Time vs. Supply Voltage S16-2128-Rev. A, 17-Oct-16 5.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Analog Voltage (V) Capacitance vs. Analog Voltage Document Number: 67894 6 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input V+ NO or NC Switch Input VINL Switch Output COM tr < 5 ns tf < 5 ns 50 % VOUT 0.9 x V OUT Logic Input IN RL 50 Ω GND Switch Output CL 35 pF 0V tOFF tON 0V Logic “1” = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM (R L RL + R ON ) Fig. 1 - Switching Time V+ Logic Input V+ COM NO VNO VINH tr < 5 ns tf < 5 ns VINL VO NC VNC RL 50 Ω IN CL 35 pF GND VNC = V NO VO 90 % Switch 0V Output tD tD CL (includes fixture and stray capacitance) Fig. 2 - Break-Before-Make Interval V+ Rgen Δ VOUT V+ NC or NO COM VOUT VOUT + IN IN Vgen CL = 1 nF VIN = 0 - V+ On Off On GND Q = ΔVOUT x CL IN depends on switch configuration: input polarity determined by sense of switch. Fig. 3 - Charge Injection S16-2128-Rev. A, 17-Oct-16 Document Number: 67894 7 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2523, DG2524 www.vishay.com Vishay Siliconix V+ V+ 10 nF 10 nF V+ V+ NC or NO IN COM 0 V, 2.4 V COM Meter COM IN 0 V, 2.4 V RL NC or NO GND HP4192A Impedance Analyzer or Equivalent GND Analyzer f = 1 MHz VCOM Off Isolation = 20 log V NO / NC Fig. 4 - Off-Isolation Fig. 5 - Channel Off / On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67894. S16-2128-Rev. A, 17-Oct-16 Document Number: 67894 8 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix QFN-16 Lead (3 x 3) D2 D2/2 Terminal Tip D (3) - B- D/2 L E/2 E2/2 e E E2 C 3xe 0.25 - A- Exposed Pad (4) 4xb 0.10 M C A B (3) 0.25 C 3xe TOP VIEW BOTTOM VIEW // 0.10 C 0.08 C A (4) NX A1 SEATING PLANE - C- A3 SIDE VIEW Notes (1) All dimensions are in millimeters. (2) N is the total number of terminals. (3) Dimension b applies to metallized terminal and is measured between 0.25 and 0.30 mm from terminal tip. (4) Coplanarity applies to the exposed heat sink slug as well as the terminal. (5) The pin #1 identifier may be either a mold or marked feature, it must be located within the zone indicated. VARIATION 1 DIM. MILLIMETERS VARIATION 2 INCHES MILLIMETERS INCHES MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. MIN. NOM MAX. A 0.80 0.90 1.00 0.031 0.035 0.039 0.80 0.90 1.00 0.031 0.035 0.039 0.012 b 0.18 0.23 0.30 0.007 0.009 0.012 0.18 0.25 0.30 0.007 0.010 D 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 D2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 E 2.90 3.00 3.10 0.114 0.118 0.122 2.90 3.00 3.10 0.114 0.118 0.122 E2 1.00 1.15 1.25 0.039 0.045 0.049 1.50 1.70 1.80 0.059 0.067 0.071 0.50 0.012 0.020 0.30 0.50 0.012 e L 0.50 BSC 0.30 0.40 0.020 BSC 0.50 BSC 0.016 0.40 0.020 BSC 0.016 0.020 ECN: T16-0233-Rev. D, 09-May-16 DWG: 5899 Revision: 09-May-16 1 Document Number: 72208 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000