DG2711DL-T1-GE3

DG2711 Vishay Siliconix Low-Voltage, Sub-Ohm, SPDT Analog Switch DESCRIPTION FEATURES The DG2711 is a sub-ohm single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, high speed (tON: 25 ns, tOFF: 14 ns), low on-resistance (RDS(on): 0.44 ) and small physical size (SC70), the DG2711 is ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG2711 is built on Vishay Siliconix’s low voltage submicron CMOS process. An epitaxial layer prevents latchup. Break-before-make is guaranteed for DG2711. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. • • • • • • As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with the lead (Pb)-free device terminations. For analog switching products manufactured with 100 % matte tin device terminations, the lead (Pb)-free "-E3" suffix is being used as a designator. Low voltage operation (1.6 V to 3.6 V) Low on-resistance - RDS(on): 0.44  typ. Fast switching - tON: 25 ns, tOFF: 14 ns Low leakage TTL/CMOS compatible 6-pin SC-70 package • Compliant to RoHS directive 2002/95/EC BENEFITS • • • • Reduced power consumption Simple logic interface High accuracy Reduce board space APPLICATIONS • • • • • Cellular phones Communication systems Portable test equipment Battery operated systems Sample and hold circuits FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION TRUTH TABLE SC-70 IN 1 6 NO (Source1) V+ 2 5 COM GND 3 4 NC (Source2) Logic NC NO 0 ON OFF 1 OFF ON Top View Device Marking: E9xx ORDERING INFORMATION Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 Temp. Range Package Part Number - 40 to 85 °C SC70-6 DG2711DL-T1-E3 www.vishay.com 1 DG2711 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Parameter Limit Reference V+ to GND Unit - 0.3 to + 4 IN, COM, NC, NOa V - 0.3 to (V+ + 0.3) Continuous Current (NO, NC and COM Pins) ± 200 Peak Current (Pulsed at 1 ms, 10 % duty cycle) ± 300 Storage Temperature (D Suffix) b Power Dissipation (Packages) 6-Pin SO70 c mA - 65 to 150 °C 250 mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 3.1 mW/°C above 70 °C. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SPECIFICATIONS (V+ = 1.8 V) Limits - 40 °C to 85 °C Test Conditions Otherwise Unless Specified Parameter Symbol V+ = 1.8 V, ± 10 %, VIN = 0.4 V or 1.0 Ve Temp.a Min.b Full 0 Typ.c Max.b Unit V+ V 2.0 2.5  Analog Switch Analog Signal Ranged VNO, VNC, VCOM RON On-Resistance Switch Off Leakage Currentf INO(off) INC(off) ICOM(off) Channel-On Leakage Currentf ICOM(on) V+ = 1.8 V, VCOM = 0.9 V INO, INC = 100 mA Room Full Room V+ = 2.2 V, VNO, VNC = 0.2 V/2 V, VCOM = 2 V/0.2 V -1 - 10 1 10 -1 - 10 1 10 Fulld -1 - 10 1 10 1.0 Fulld Room Fulld V+ = 2.2 V, VNO, VNC = VCOM = 0.2 V/2 V 0.8 Room nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Capacitanced Cin Full f IINL or IINH Input Current VIN = 0 or V+ Full 0.4 5 -1 V pF 1 µA Dynamic Characteristics Turn-On Timed tON Turn-Off Timed tOFF Break-Before-Make Timed Charge Injection d d VNO or VNC = 1.5 V, RL = 300 , CL = 35 pF Figures1 and 2 td QINJ Off-Isolation OIRR Crosstalkd XTALK NO, NC Off Capacitanced CNO(off) CNC(off) Channel-On Capacitanced CON www.vishay.com 2 Room Room Full Room CL = 1 nF, VGEN = 0 V, RGEN = 0 figure 3 RL = 50, CL = 5 pF, f = 1 MHz VIN = 0 or V+, f = 1 MHz 36 60 62 22 42 44 Fulld Room ns 3 20 Room - 56 Room - 56 Room 73 Room 167 pC dB pF Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 DG2711 Vishay Siliconix SPECIFICATIONS (V+ = 3.0 V) Limits - 40 °C to 85 °C Test Conditions Otherwise Unless Specified Parameter Symbol V+ = 3 V, ± 10 %,VIN = 0.5 V or 1.4 Ve Temp.a Min.b Full 0 Typ.c Max.b Unit V+ V Analog Switch VNO, VNC, VCOM Analog Signal Ranged On-Resistance RON Flatness RON Match Switch Off Leakage Current RON V+ = 2.7 V, VCOM = 1.5 V INO, INC = 100 mA Room Full 0.44 0.6 0.7 RON Flatness V+ = 2.7 V, VCOM = 0.6 V, 1.5 V INO, INC = 100 mA Room 0.14 0.2 RON V+ = 2.7 V, VCOM = 1.5 V INO, INC = 100 mA Room INO(off) INC(off) ICOM(off) Channel-On Leakage Current ICOM(on) V+ = 3.3 V, VNO, VNC = 0.3 V/3 V, VCOM = 3 V/0.3 V V+ = 3.3 V, VNO, VNC = VCOM = 0.3 V/3 V  0.07 Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 Room Full -1 - 10 1 10 1.4 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Capacitanced Cin Full f IINL or IINH Input Current VIN = 0 or V+ Full 0.5 5 -1 V pF 1 µA Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time td Injectiond QINJ Charge Off-Isolationd OIRR Crosstalkd XTALK NO, NC Off Capacitanced Channel-On Capacitance d CNO(off) CNC(off) VNO or VNC = 1.5 V, RL = 300 , CL = 35 pF figures 1 and 2 Room Full 25 46 48 Room Full 14 38 40 Room CL = 1 nF, VGEN = 0 V, RGEN = 0 , figure 3 RL = 50, CL = 5 pF, f = 1 MHz VIN = 0 or V+, f = 1 MHz CON ns 1 Room 28 Room - 56 Room - 56 Room 70 Room 163 pC dB pF Power Supply Power Supply Range V+ Power Supply Current I+ 1.6 V+ = 3.6 V, VIN = 0 or V+ 0.01 3.6 V 1.0 µA Notes: a. Room = 25 °C, full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. f. Guaranteed by 3 V leakage testing, not production tested. Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 www.vishay.com 3 DG2711 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 0.8 1.50 RON - On-Resistance (Ω) 1.25 –– –– –– –– –– –– –– –– 1.00 0.75 V+ = 3.0 V IS = 100 mA 0.7 V+ = 1.6 V V+ = 1.8 V V+ = 2.0 V V+ = 2.5 V V+ = 2.7 V V+ = 3.0 V V+ = 3.3 V V+ = 3.6 V RON - On-Resistance (Ω) T = 25 °C IS = 100 mA 0.50 0.25 0.6 85 °C - 40 °C 0.4 0.3 0.2 0.1 0 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 4.0 0.5 1.0 1.5 2.0 2.5 3.0 VCOM - Analog Voltage (V) VCOM - Analog Voltage (V) RON vs. VCOM and Single Supply Voltage RON vs. Analog Voltage and Temperature 100 m 10 000 V+ = 3 V VIN = 0 V V+ = 3 V 10 m 1m 1000 I+ - Supply Current (A) I+ - Supply Current (nA) 25 °C 0.5 100 10 100 µ 10 µ 1µ 100 n 10 n 1 - 60 1n - 40 - 20 0 20 40 60 80 100 10 Temperature (°C) 100 1K 10 K 100 K 1M 10 M Input Switching Frequency (Hz) Supply Current vs. Temperature Supply Current vs. Input Switching Frequency 1000 300 V+ = 3.3 V 250 ICOM(on) V+ = 3.3 V 200 150 ICOM(off) Leakage Current (pA) Leakage Current (pA) 100 10 INO(off)/INC(off) 1 100 50 0 - 50 –– ICOM(off) –– INO(off)/INC(off) –– ICOM(on) - 100 - 150 - 200 - 250 0.1 - 60 www.vishay.com 4 - 40 - 20 0 20 40 60 80 100 - 300 0.00 0.55 1.10 1.65 2.20 Temperature (°C) VCOM, V NO, V NC - Analog Voltage Leakage Current vs. Temperature Leakage vs. Analog Voltage 2.75 3.30 Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 DG2711 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 40 10 tON V+ = 1.8 V 30 tON V+ = 3.0 V 25 tOFF V+ = 1.8 V tOFF V+ = 2.0 V tOFF V+ = 3.0 V 15 Loss, OIRR, XTALK (dB) t ON , t OFF - Switching Time (ns) 35 20 0 tON V+ = 2.0 V LOSS - 10 - 20 XTALK - 30 OIRR - 40 - 50 V+ = 3 V RL = 50 Ω - 60 10 - 70 5 0 - 60 - 80 - 40 - 20 0 20 40 60 80 - 90 100 K 100 1M Temperature (°C) 10 M 100 M 1G Frequency (Hz) Switching Time vs. Temperature Insertion Loss, Off-Isolation, Crosstalk vs. Frequency 240 2.00 220 200 Q - Charge Injection (pC) V T - Switching Threshold (V) 1.75 1.50 1.25 1.00 0.75 0.50 180 160 V+ = 3 V 140 120 100 80 60 V+ = 1.8 V 40 0.25 0.00 1.0 20 1.5 2.0 2.5 3.0 3.5 4.0 0 0.0 0.5 1.0 1.5 2.0 2.5 V+ - Supply Voltage (V) VCOM - Analog Voltage (V) Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 3.0 www.vishay.com 5 DG2711 Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input VINL V+ NO or NC Switch Input tr < 5 ns tf < 5 ns 50 % Switch Output COM VOUT 0.9 x V OUT Switch Output IN Logic Input RL 50 GND CL 35 pF 0V tOFF tON Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) V OUT = V COM RL RL + R ON Figure 1. Switching Time V+ Logic Input V+ VNO VNC tr < 5 ns tf < 5 ns VINL COM NO VINH VO NC RL 50 Ω IN CL 35 pF GND VNC = V NO VO Switch Output 90 % 0V tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make Interval V+ Rgen ΔVOUT V+ COM NC or NO VOUT VOUT + Vgen IN CL = 1 nF IN On Off On GND Q = ΔVOUT x CL VIN = 0 - V+ IN depends on switch configuration: input polarity determined by sense of switch. Figure 3. Charge Injection www.vishay.com 6 Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 DG2711 Vishay Siliconix TEST CIRCUITS V+ 10 nF V+ NC or NO IN 0 V, 2.4 V COM RL GND V COM Off Isolation = 20 log V NO/ NC Analyzer Figure 4. Off-Isolation V+ 10 nF V+ COM Meter IN 0 V, 2.4 V NC or NO GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Figure 5. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?73200. Document Number: 73200 S10-2403-Rev. C, 25-Oct-10 www.vishay.com 7 Package Information Vishay Siliconix SCĆ70: 6ĆLEADS MILLIMETERS 6 5 Dim A A1 A2 b c D E E1 e e1 L 4 E1 E 1 2 3 -B- e b e1 D -Ac A2 A L A1 Document Number: 71154 06-Jul-01 INCHES Min Nom Max Min Nom Max 0.90 – 1.10 0.035 – 0.043 – – 0.10 – – 0.004 0.80 – 1.00 0.031 – 0.039 0.15 – 0.30 0.006 – 0.012 0.10 – 0.25 0.004 – 0.010 1.80 2.00 2.20 0.071 0.079 0.087 1.80 2.10 2.40 0.071 0.083 0.094 1.15 1.25 1.35 0.045 0.049 0.053 0.65BSC 0.026BSC 1.20 1.30 1.40 0.047 0.051 0.055 0.10 0.20 0.30 0.004 0.008 0.012 7_Nom 7_Nom ECN: S-03946—Rev. B, 09-Jul-01 DWG: 5550 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000