DG2750DN1-T1-GE4

DG2750 www.vishay.com Vishay Siliconix 0.45 , Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION FEATURES The DG2750 is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional switch, and is capable of switching negative swing audio without the need for a coupling capacitor. With a single power supply, the audio signal can swing over the range from ((V+) - 5) to V+. • 1.6 V to 5.5 V single power rail operation Guaranteed to operate with 1.4 V logic when V+ is in the range of 2.7 V to 5.5 V, the DG2750 will allow an easy interface with low voltage DSP or ASIC control logic. • 1.4 V high logic The DG2750 is built on sub micron CMOS low voltage process technology, has very low quiescent current, and provides greater than 600 mA latch-up protection, as tested per JESD78. • Reduced power consumption The DG2750 is assembled in compact mQFN10, 1.4 mm x 1.8 mm x 0.55 mm and ultra thin UTMQFN of 0.35 mm thickness. As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device termination. The miniQFN-10 package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free “-E4” suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC® standards for reflow and MSL rating. As a further sign of Vishay Siliconix’s commitment, the DG2750 is fully RoHS-complaint and halogen-free. • Capable to switch negative swing audio without DC blocking capacitor • Low signal distortion: THD+N < -98 dB • Low on-resistance • Latch-up current > 600 mA (JESD78) • ESD (HBM): 8 kV • Reduce board space • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Cellular phones • Portable media players • Computer and game machine • Handheld healthcare and instruments       FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION NC2 GND miniQFN-10L 7 6 IN2 1 28 9 4 IN1 10 3 COM1 Pin 1: LONG LEAD 1 2 NO1 NO2 NC1 V+ COM2 5 Top View S17-0426-Rev. G, 20-Mar-17 Ux Pin 1 Device Marking: Ux for DG2750 x = Date/Lot Traceability Code Document Number: 64736 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2750 www.vishay.com Vishay Siliconix ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE DG2750DN-T1-E4 -40 °C to +85 °C DG2750DN1-T1-GE4 PACKAGE SIZE miniQFN-10 1.4 mm x 1.8 mm x 0.55 mm UTMQFN-10 1.4 mm x 1.8 mm x 0.35 mm TRUTH TABLE, DG2750 IN1 (PIN 4) IN2 (PIN 8) FUNCTION 0 X COM1 = NC1 COM1 = NO1 1 X X 0 COM2 = NC2 X 1 COM2 = NO2 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER LIMIT Reference to GND UNIT V+, IN -0.3 to +6 COM, NO, NC a (V+) -5.5 or -2.5 whichever higher, (V+ + 0.3) Current (Any Terminal except COM, NO, NC, IN) V 30 Continuous Current (COM, NO, NC, IN) ± 250 Peak Current (Pulsed at 1 ms, 10 % Duty Cycle) ± 500 Storage Temperature (D Suffix) Power Dissipation (Packages) b miniQFN-10 c ESD (Human Body Model) I/O to GND Latch-up (per JESD78) mA -65 to +150 °C 208 mW 8 kV 600 mA Notes a. Signals on COM, NO, NC, exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings b. All leads welded or soldered to PC board c. Derate 2.6 mW/°C above 70 °C SPECIFICATIONS (V+ = 2.7 V,  10 %) PARAMETER SYMBOL TEST CONDITIONS OTHERWISE UNLESS SPECIFIED LIMITS -40 °C to +85 °C TEMP. a UNIT MIN.b TYP. c MAX. b -2.5 - V+ Room - 0.45 1 Full - - 1.3 Room - 0.1 - Analog Switch Analog Signal Range d VANALOG On-Resistance RDS(on) On-Resistance Match RON On-Resistance Flatness Switch Off Leakage Current Channel On Leakage Current Full V+ = 2.7 V, VS = ((V+) -4.5 V, -1 V, 0 V, 1 V, 2 V, V+), IS = 100 mA RON Flatness Room - 0.3 - INO/NC(off) Room - 50 - ICOM(off) ICOM(on) V+ = 2.7 V, VNC/NO = -2.5 V or 2.5 V, VCOM = 2.5 V or -2.5 V V  Full -250 - 250 Room - 50 - Full -250 - 250 Full 1.4 - - Full - - 0.6 Room - 6.5 - pF Full -1 - 1 μA nA Digital Control Input Voltage High VINH Input Voltage Low VINL Input Capacitance Input Current S17-0426-Rev. G, 20-Mar-17 V+ = 2.7 V to 4.3 V CIN IINL or IINH VIN = 0 or V+ V Document Number: 64736 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2750 www.vishay.com Vishay Siliconix SPECIFICATIONS (V+ = 2.7 V,  10 %) PARAMETER TEST CONDITIONS OTHERWISE UNLESS SPECIFIED SYMBOL LIMITS -40 °C to +85 °C TEMP. a UNIT MIN.b TYP. c MAX. b Room 800 1160 - Dynamic Characteristics Break-Before-Make Time e, d tBBM Enable Turn-On Time e, d tON(EN) Enable Turn-Off Time e, d tOFF(EN) Charge Injection d Total Harmonic Distortion Plus Noise d V+ = 3 V, VS = 1.5 V, RL = 50 , CL = 35 pF 1000 - - - 1200 2100 Full - - 2500 Room - 33 130 Full - - 150 ns QINJ CL = 1 nF, RGEN = 0 , VGEN = 0 V - 4 - pC THD+N f = 20 Hz to 20 kHz, VCOM = 0.5 VP-P, RS = RL = 600 ; DC bias = 0 V - < -98 - dB Off-Isolation d OIRR Crosstalk d, f XTALK V+ = 3 V, RL = 50 , CL = 5 pF, f = 300 kHz BW V+ = 3 V, RL = 50 , -3 dB Bandwidth d Full Room Channel-Off Capacitance d CNC/NO(off) Channel-On Capacitance d CCOM/NC/NO(on) Room V+ = 3 V, f = 1 MHz - -54 - - -60 - - 49 - - 36 - - 106 - 1.6 - 5.5 V - - 2 μA dB MHz pF Power Supply Power Supply Range V+ Power Supply Current I+ VIN = 0 V, or V+ Full Notes a. Room = 25 °C, Full = as determined by the operating suffix b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet c. Typical values are for design aid only, not guaranteed nor subject to production testing d. Guarantee by design, not subjected to production test e. VIN = V+ voltage to perform proper function f. Crosstalk measured between channels    Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.  3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 4.5 V+ = 1.6 V T = 25 °C 4.0 3.5 RON - On-Resistance (Ω) RON - On-Resistance (Ω) TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) V+ = 1.6 V V+ = 2.7 V V+ = 2.0 V V+ = 3.0 V V+ = 3.6 V V+ = 4.3 V V+ = 5.5 V 3.0 2.5 2.0 -40 °C +25 °C 1.5 +85 °C 1.0 0.5 0.0 -3 -2 -1 0 1 2 3 VD - Analog Voltage (V) 4 5 6 On-Resistance vs. VD and Single Supply Voltage S17-0426-Rev. G, 20-Mar-17 -3 -2 -1 0 1 VD - Analog Voltage (V) 2 3 On-Resistance vs. Analog Voltage and Temperature Document Number: 64736 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2750 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 1.0 1.6 V+ = 2.0 V V+ = 2.7 V 0.9 1.4 1.0 RON - On-Resistance (Ω) RON - On-Resistance (Ω) 0.8 1.2 -40 °C +25 °C 0.8 +85 °C 0.6 0.4 - 40 °C 0.7 + 25 °C + 85 °C 0.6 0.5 0.4 0.3 0.2 0.2 0.1 0.0 -2.5 0.0 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 -2 2.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 1.0 1.0 V+ = 3.0 V 0.9 V+ = 4.3 V 0.9 0.8 0.8 -40 °C RON - On-Resistance (Ω) RON - On-Resistance (Ω) -1.5 VD - Analog Voltage (V) 0.7 +25 °C 0.6 +85 °C 0.5 0.4 0.3 0.7 0.6 +85 °C 0.5 0.4 0.3 0.2 0.2 0.1 0.1 0.0 -1.5 -40 °C +25 °C 0.0 -1 -0.5 0 0.5 1 1.5 2 VD - Analog Voltage (V) 2.5 3 0 3.5 0.5 1 1.5 2 2.5 3 3.5 4 4.5 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 1000000 10 000 V+ = 2.7 V V+ = 4.3 V ID(ON) 100000 V+ = 3.6 V 100 10 Leakage Current (pA) I+ - Supply Current (A) 1000 V+ = 2.0 V 1 0.1 10000 ID(OFF) 1000 100 10 0.01 IS(OFF) 0.001 10 100 1K 10K 100K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency S17-0426-Rev. G, 20-Mar-17 1 -40 -20 0 20 40 60 80 100 Temperature (°C) Leakage Current vs. Temperature Document Number: 64736 4 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2750 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 1.20 10 Loss 0 -10 VIH Loss, OIRR, XTALK (dB) VT - Switching Threshold (V) 1.10 1.00 0.90 0.80 VIL 0.70 -20 V+ = 3.0 V RL = 50  OIRR -30 XTALK -40 -50 -60 -70 -80 0.60 -90 0.50 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 -100 105 6 106 107 108 109 Frequency (Hz) V+ - Supply Voltage (V) Switching Threshold vs. Supply Voltage Insertion Loss, Off-Isolation, Crosstalk vs. Frequency TEST CIRCUITS V+ VINH Logic Input Switch Input Logic Input NO1/2 or NC1/2 V+ COM1 or COM2 50 % tr < 5 ns tf < 5 ns VINL Switch Output VOUT 0.9 x V OUT IN CL 35 pF RL 50 Ω GND Switch Output 0V tON Logic "1" = Switch on Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM (R L RL + R ON tOFF ) Fig. 1 - Switching Time V+ V+ NO1 or NC1 NO2 or NC2 NO1 or NC1 Logic Input COM1 or COM2 VO VINH tr < 5 ns tf < 5 ns VINL NO2 or NC2 RL 50 Ω IN CL 35 pF VNO = VNC VO GND Switch 0V Output 90 % tD tD CL (includes fixture and stray capacitance) Fig. 2 - Break-Before-Make Interval S17-0426-Rev. G, 20-Mar-17 Document Number: 64736 5 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG2750 www.vishay.com Vishay Siliconix TEST CIRCUITS V+ Rgen V+ NO or NC VOUT COM1 or COM2 VOUT VOUT + IN IN Vgen CL = 1 nF VIN = 0 - V+ On On Off GND Q= OUT x CL IN depends on switch configuration: input polarity determined by sense of switch. Fig. 3 - Charge Injection V+ V+ 10 nF 10 nF V+ V+ NO or NC IN COM1 or COM2 0 V, 2.4 V Meter COM1 or COM2 IN 0 V, 2.4 V RL NC or NO GND HP4192A Impedance Analyzer or Equivalent GND f = 1 MHz Analyzer Off Isolation = 20 log COM1 or COM2 NC or NO Fig. 4 - Off-Isolation Fig. 5 - Channel Off/On Capacitance                        Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?64736. S17-0426-Rev. G, 20-Mar-17 Document Number: 64736 6 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix MINI QFN-10L CASE OUTLINE DIM MILLIMETERS INCHES MIN. NAM. MAX. MIN. NAM. MAX. A 0.45 0.55 0.60 0.0177 0.0217 0.0236 A1 0.00 - 0.05 0.000 - 0.002 b 0.15 0.20 0.25 0.006 0.008 0.010 0.150 or 0.127 REF (1) c 0.006 or 0.005 REF (1) D 1.70 1.80 1.90 0.067 0.071 0.075 E 1.30 1.40 1.50 0.051 0.055 0.059 e 0.40 BSC 0.016 BSC L 0.35 0.40 0.45 0.014 0.016 0.018 L1 0.45 0.50 0.55 0.0177 0.0197 0.0217 Note (1) The dimension depends on the leadframe that assembly house used. ECN T16-0163-Rev. B, 16-May-16 DWG: 5957 Revision: 16-May-16 1 Document Number: 74496 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern Vishay Siliconix RECOMMENDED MINIMUM PADS FOR MINI QFN 10L 1.700 (0.0669) 9x 0.563 (0.0221) 0.663 (0.0261) 0.200 (0.0079) 1 2.100 (0.0827) 0.400 (0.0157) Pitch 10 x 0.225 (0.0089) Mounting Footprint Dimensions in mm (inch) Document Number: 66554 Revision: 05-Mar-10 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000