DG408, DG409
www.vishay.com
Vishay Siliconix
8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
DESCRIPTION
FEATURES
The DG408 is an 8 channel single-ended analog multiplexer
designed to connect one of eight inputs to a common output
as determined by a 3-bit binary address (A0, A1, A2). The
DG409 is a dual 4 channel differential analog multiplexer
designed to connect one of four differential inputs to a
common dual output as determined by its 2-bit binary
address (A0, A1). Break-before-make switching action
protects against momentary crosstalk between adjacent
channels.
•
•
•
•
•
•
•
•
An on channel conducts current equally well in both
directions. In the off state each channel blocks voltages up
to the power supply rails. An enable (EN) function allows the
user to reset the multiplexer/demultiplexer to all switches off
for stacking several devices. All control inputs, address (Ax)
and enable (EN) are TTL compatible over the full specified
operating temperature range.
Applications for the DG408, DG409 include high speed data
acquisition, audio signal switching and routing, ATE
systems, and avionics. High performance and low power
dissipation make them ideal for battery operated and
remote instrumentation applications.
Designed in the 44 V silicon-gate CMOS process, the
absolute maximum voltage rating is extended to 44 V.
Additionally, single supply operation is also allowed. An
epitaxial layer prevents latchup.
For additional information please see Technical Article
TA201.
Low on-resistance - RDS(on): 100
Low charge injection - Q: 20 pC
Available
Fast transition time - tTRANS: 160 ns
Available
Low power - ISUPPLY: 10 μA
Single supply capability
44 V supply max. rating
TTL compatible logic
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
BENEFITS
•
•
•
•
•
•
Reduced switching errors
Reduced glitching
Improved data throughput
Reduced power consumption
Increased ruggedness
Wide supply ranges
- Single supply: +5 V to 36 V
- Dual supplies: ± 5 V to ± 20 V
APPLICATIONS
•
•
•
•
•
•
Data acquisition systems
Audio signal routing
ATE systems
Battery powered systems
Single supply systems
Medical instrumentation
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
Dual-In-Line,
SOIC and TSSOP
DG408
A0
EN
VS1
S2
S3
S4
D
1
2
16
Decoders/Drivers
15
3
14
4
13
5
12
6
11
7
10
8
9
Top View
E24-0223-Rev. L, 29-Apr-2024
Dual-In-Line,
SOIC and TSSOP
DG409
A1
A0
A2
EN
GND
V-
V+
S1a
S5
S2a
S6
S3a
S7
S4a
S8
Da
1
2
16
Decoders/Drivers
15
3
14
4
13
5
12
6
11
7
10
8
9
A1
GND
V+
S1b
S2b
S3b
S4b
Db
Top View
Document Number: 70062
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TRUTH TABLE (DG408)
TRUTH TABLE (DG409)
A2
A1
A0
EN
ON SWITCH
A1
A0
EN
ON SWITCH
X
X
X
0
None
X
X
0
None
0
0
0
1
1
0
0
1
1
0
0
1
1
2
0
1
1
2
0
1
0
1
3
1
0
1
3
0
1
1
1
4
1
1
1
4
1
0
0
1
5
1
0
1
1
6
1
1
0
1
7
1
1
1
1
8
Notes
• Logic “0” = VAL 0.8 V
• Logic “1” = VAH 2.4 V
• X = do not care
ORDERING INFORMATION (Commercial)
PART
CONFIGURATION
TEMP. RANGE
PACKAGE
ORDERING PART NUMBER
16-pin plastic DIP
DG408
8:1 x 1
-40 °C to +85 °C
DG408DJ-E3
DG408DY-E3
16-pin SOIC
DG408DY-T1-E3
DG408DQ-E3
16-pin TSSOP
DG408DQ-T1-E3
16-pin plastic DIP
DG409
4:1 x 2
-40 °C to +85 °C
DG409DJ-E3
DG409DY-E3
16-pin SOIC
DG409DY-T1-E3
DG409DQ-E3
16-pin TSSOP
DG409DQ-T1-E3
Note
• -T1 indicates tape and reel, -E3 indicates lead (Pb)-free and RoHS-compliant, NO -E3 indicates standard tin/lead finish
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Voltages referenced to VDigital
inputs a,
V+ to V- e
GND to V-
LIMIT
44
-25
Current (any terminal)
30
Peak current, S or D (pulsed at 1 ms, 10 % duty cycle max.)
100
Power dissipation (package) b
V
(V-) - 2 to (V+) + 2
or 20 mA, whichever occurs first
VS, VD
Storage temperature
UNIT
(DJ, DY suffix)
-65 to +125
16-pin plastic DIP c
450
16-pin narrow SOIC and TSSOP d
600
mA
°C
mW
Notes
a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings
b. All leads soldered or welded to PC board
c. Derate 6 mW/°C above 75 °C
d. Derate 7.6 mW/°C above 75 °C
e. Also applies when V- = GND
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
2
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a
TEST CONDITIONS UNLESS
OTHERWISE SPECIFIED
PARAMETER
SYMBOL
V+ = 15 V, V- = -15 V
VAL = 0.8 V, VAH = 2.4
TEMP. b
TYP. c
D SUFFIX
-40 °C to +85 °C
UNIT
MIN. d
Vf
MAX. d
Analog Switch
Analog signal range e
VANALOG
Full
-
-15
15
Room
40
-
100
Full
-
-
125
-
-
15
0.5
RDS(on)
VD = ± 10 V, IS = -10 mA
RDS(on) matching between
channels g
RDS(on)
VD = ± 10 V
Room
Source off leakage current
IS(off)
VS = ± 10 V,
VD = ± 10 V, VEN = 0 V
Room
-
-0.5
Full
-
-5
5
Room
-
-1
1
Full
-
-20
20
Drain-source on-resistance
DG408
DG408
Drain off leakage
current
DG409
ID(off)
VD = ± 10 V,
VS = ± 10 V,
VEN = 0 V
DG409
DG408
DG408
Drain on leakage
current
DG409
ID(on)
VS = VD = ± 10 V,
sequence each switch on
DG409
Room
-
-1
1
Full
-
-10
10
Room
-
-1
1
Full
-
-20
20
Room
-
-1
1
Full
-
-10
10
V
nA
Digital Control
Logic high Input voltage
VINH
Full
-
2.4
-
Logic low Input voltage
VINL
Full
-
-
0.8
Logic high Input current
IAH
VA = 2.4 V, 15 V
Full
-
-10
10
Logic low Input current
IAL
VEN = 0 V, 2.4 V, VA = 0 V
Full
-
-10
10
Logic input capacitance
Cin
f = 1 MHz
Room
8
-
-
Transition time
tTRANS
See Fig. 2
Full
160
-
250
Break-before-make interval
tOPEN
See Fig. 4
Room
-
10
-
Room
115
-
150
V
μA
pF
Dynamic Characteristics
Enable turn-on time
ton(EN)
Enable turn-off time
toff(EN)
Charge injection
See Fig. 3
Full
-
-
-
Room
105
-
150
Q
CL = 10 nF, VS = 0 V
Room
20
-
-
Off isolation h
OIRR
VEN = 0 V, RL = 1 k,
f = 1 MHz
Room
-75
-
-
Source off capacitance
CS(off)
VEN = 0 V, VS = 0 V,
f = 1 MHz
Room
3
-
-
Room
26
-
-
Room
14
-
-
Room
37
-
-
Room
25
-
-
Full
10
-
75
Full
1
-75
-
Room
0.2
-
0.5
Full
-
-
2
Full
-
-500
-
DG408
DG409
DG408
DG409
Drain off capacitance
Drain on capacitance
CD(off)
VEN = 0 V, VD = 0 V,
f = 1 MHz
CD(on)
ns
pC
pF
Power Supplies
Positive supply current
I+
Negative supply current
I-
Positive supply current
I+
Negative supply current
I-
E24-0223-Rev. L, 29-Apr-2024
VEN = VA = 0 V or 5 V
VEN = VA = 0 V or 5 V
μA
mA
μA
Document Number: 70062
3
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a (single supply)
TEST CONDITIONS UNLESS
OTHERWISE SPECIFIED
PARAMETER
SYMBOL
V+ = 12 V, V- = 0 V
TEMP. b
TYP. c
VAL = 0.8 V, VAH = 2.4 V f
D SUFFIX
-40 °C to +85 °C
UNIT
MIN. d
MAX. d
Analog Switch
Drain-source on-resistance e, f
RDS(on)
VD = 3 V, 10 V, IS = -1 mA
Room
90
-
-
Dynamic Characteristics
Switching time of multiplexer e
tTRANS
VS1 = 8 V, VS8 = 0 V, VIN = 2.4 V
Room
180
-
-
time e
ton(EN)
VINH = 2.4 V, VINL = 0 V,
VS1 = 5 V
Room
180
-
-
Enable turn-off time e
toff(EN)
Room
120
-
-
CL = 1 nF, VS = 0 V, RS = 0
Room
5
-
-
Enable turn-on
Charge injection e
Q
ns
pC
Notes
a. Refer to PROCESS OPTION FLOWCHART
b. Room = 25 °C, full = as determined by the operating temperature suffix
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
e. Guaranteed by design, not subject to production test
f. VIN = input voltage to perform proper function
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on channel 4 due to proximity to the drain pin
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
4
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
80
60
VS = 0 V for I D(off)
VS = V D for ID(on)
V+ = 15 V
V- = - 15 V
40
60
CD(on)
DG408 ID(off)
CD(off)
I D (pA)
C S, D (pF)
20
40
DG409 ID(off)
DG409 ID(on)
0
- 20
20
DG408 ID(on)
CS(off)
- 40
0
- 60
- 15
- 10
-5
0
5
10
15
0
2
VANALOG - Analog Voltage (V)
Source/Drain Capacitance vs. Analog Voltage
15
- 20
- 60
V+ = 12 V
V- = 0 V
-5
DG408 ID(on), ID(off)
- 140
- 15
5
0
DG409 ID(on)
- 100
V+ = 15 V
V- = - 15 V
10
DG409 ID(off)
IS(off) (pA)
I D (pA)
20
V+ = 15 V
V- = - 15 V
VS = - VD for ID(off)
VD = V S(open) for ID(on)
20
12
Drain Leakage Current vs. Source/Drain Voltage
(Single 12 V Supply)
100
60
4
6
8
10
VANALOG - Analog Voltage (V)
- 10
- 10
-5
0
5
10
VD or V S - Drain or Source Voltage (V)
15
- 15
- 10
-5
5
0
VS - Source Voltage (V)
10
15
Source Leakage Current vs. Source Voltage
Drain Leakage Current vs. Source/Drain Voltage
2.0
- 100 mA
VSUPPLY = ± 15 V
- 10 mA
1.5
VEN = 2.4 V
I-
V TH (V)
- 1 mA
1.0
- 100 µA
- 10 µA
VEN = 0 V or 5 V
0.5
- 1 µA
- 0.1 µA
0.0
4
8
12
16
20
+ VSUPPLY (V)
Input Switching Threshold vs. Supply Voltage
E24-0223-Rev. L, 29-Apr-2024
100
1K
10K
100K
1M
10M
Switching Frequency (Hz)
Negative Supply Current vs. Switching Frequency
Document Number: 70062
5
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100 mA
100 µA
VSUPPLY = 15 V
10 µA
I+
10 mA
1 µA
100 nA
I+, I-
I+
VEN = 2.4 V
1 mA
10 nA
1 nA
100 µA
- (I-)
VEN = 0 V or 5 V
VSUPPLY = ± 15 V
VA = 0 V
VEN = 0 V
100 pA
10 µA
10 pA
100
1K
10K
100K
1M
10M
- 55 - 35
- 15
25
5
Switching Frequency (Hz)
45
65
85
105
125
Temperature (°C)
Positive Supply Current vs. Switching Frequency
ISUPPLY vs. Temperature
90
CL = 10 000 pF
VIN = 5 Vp-p
80
20
70
60
10
Q (pC)
I+ (µA)
15
V+ = 15 V
V- = - 15 V
VIN = 0 V
VEN = 0 V
50
V+ = 15 V
V- = - 15 V
40
30
20
5
10
V+ = 12 V
V- = 0 V
0
0
- 55
- 35 - 15
25
5
65
45
85
105
- 10
- 15
125
- 10
Temperature (°C)
0
-5
5
15
10
VS - Source Voltage (V)
Positive Supply Current vs. Temperature (DG408)
Charge Injection vs. Analog Voltage
160
120
140
V+ = 7.5 V
100
±5V
120
R DS(on) (Ω)
R DS(on) (Ω)
80
±8V
± 10 V
± 12 V
60
10 V
100
12 V
80
15 V
60
20 V
40
22 V
40
± 20 V
20
0
- 20
V- = 0 V
± 15 V
20
0
- 16 - 12
-8
-4
0
4
8
VD - Drain Voltage (V)
RDS(on) vs. VD and Supply
E24-0223-Rev. L, 29-Apr-2024
12
16
20
0
4
8
12
16
20
22
VD - Drain Voltage (V)
RDS(on) vs. VD and Supply (Single Supply)
Document Number: 70062
6
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
130
80
V+ = 15 V
V- = - 15 V
70
85 °C
60
125 °C
50
90
85 °C
40
RDS(on) ()
R DS(on) (Ω)
125 °C
110
25 °C
30
25 °C
70
0 °C
- 40 °C
50
20
0 °C
- 40 °C
- 55 °C
- 55 °C
30
10
0
V+ = 12 V
V- = 0 V
10
- 15
- 10
-5
5
0
10
15
0
2
VD - Drain Voltage (V)
RDS(on) vs. VD and Temperature
8
10
12
RDS(on) vs. VD and Temperature (Single Supply)
- 150
1
RL = 1 kΩ
V+ = 15 V
V- = - 15 V
RL = 1 kΩ
- 130
0
V+ = 15 V
V- = - 15 V
Ref. 1 VRMS
-1
LOSS (dB)
- 110
(dB)
6
4
VD - Drain Voltage (V)
- 90
Off-Isolation
- 70
-2
-3
-4
Crosstalk
- 50
RL = 50 Ω
-5
- 30
-6
100
1K
10K
100K
1M
10M
10
100M
10 0
1K
f - Frequency (Hz)
10K
100K
1M
10M
100M
f - Frequency (Hz)
Off Isolation and Crosstalk vs. Frequency
Insertion Loss vs. Frequency
140
275
250
120
225
t (ns)
t (ns)
tTRANS
100
tOFF(EN)
200
tTRANS
175
tOFF(EN)
tON(EN)
80
150
tON(EN)
125
60
± 10
100
± 12
± 14
± 16
± 18
± 20
VSUPPLY (V)
Switching Time vs. Bipolar Supply
E24-0223-Rev. L, 29-Apr-2024
± 22
8
9
10
11
12
13
14
15
VSUPPLY (V)
Switching Time vs. Single Supply
Document Number: 70062
7
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
SCHEMATIC DIAGRAM (Typical Channel)
V+
VREF
GND
D
A0
V+
Level
Shift
AX
V-
Decode/
Drive
S1
V+
EN
Sn
V-
Fig. 1
TEST CIRCUITS
+ 15 V
V+
A2
S1
A1
± 10 V
S2 - S7
A0
DG408
S8
EN
± 10 V
VO
D
GND
V-
50 %
0V
35 pF
300 Ω
50 Ω
Logic
Input
tr < 20 ns
tf < 20 ns
3V
- 15 V
VS1
90 %
Switch
Output
+ 15 V
VO
0V
V+
A1
A0
± 10 V
S1
90 %
VS8
S1a - S4a, Da
DG409
S4b
S1 ON
GND
S8 ON
VO
Db
EN
tTRANS
tTRANS
± 10 V
V300 Ω
50 Ω
35 pF
- 15 V
Fig. 2 - Transition Time
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
8
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
+ 15 V
V+
S1
-5V
EN
S2 - S8
A0
DG408
A1
A2
GND
VO
D
V-
50 Ω
Logic
Input
50 %
0V
35 pF
1 kΩ
tr < 20 ns
tf < 20 ns
3V
tON(EN)
- 15 V
tOFF(EN)
0V
+ 15 V
Switch
Output
VO
V+
S1b
90 %
-5V
VO
EN
S1a - S4a, Da
S2b - S4b
A0
A1
10 %
DG409
Db
GND
VO
V-
50 Ω
35 pF
1 kΩ
- 15 V
Fig. 3 - Enable Switching Time
+ 15 V
V+
EN
+ 2.4 V
Logic
Input
All S and Da
+5V
tr < 20 ns
tf < 20 ns
3V
50 %
0V
A0
DG408
DG409
A1
A2
GND
50 Ω
Db, D
VO
VS
V-
- 15 V
300 Ω
80 %
Switch
Output
35 pF
VO
0V
tOPEN
Fig. 4 - Break-Before-Make Interval
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
9
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
+ 15 V
Rg
V+
SX
Logic
Input
EN
OFF
ON
OFF
0V
A0
Channel
Select
3V
VO
D
A1
CL
10 nF
A2
GND
V-
ΔVO
Switch
Output
ΔVO is the measured voltage due to charge transfer
error Q, when the channel turns off.
Q = CL x ΔVO
- 15 V
Fig. 5 - Charge Injection
+ 15 V
+ 15 V
VIN
V+
SX
VS
Rg = 50 Ω
VIN
SX
VS
S8
A0
D
V+
S1
S8
VO
A1
A0
A2
EN
GND
RL
1 kΩ
V-
Rg = 50 Ω
VO
D
A1
A2
EN
GND
RL
1 kΩ
V-
- 15 V
VOUT
Off Isolation = 20 log
- 15 V
VIN
Crosstalk = 20 log
VOUT
VIN
Fig. 7 - Crosstalk
Fig. 6 - Off Isolation
VS
S1
+ 15 V
+ 15 V
V+
V+
Rg = 50 Ω
S1
Meter
A2
A0
D
VO
A1
Channel
Select
S8
A1
A0
A2
GND
EN
V-
RL
1 kΩ
- 15 V
Insertion Loss = 20 log
D
GND
VOUT
EN
V-
HP4192A
Impedance
Analyzer
or Equivalent
f = 1 MHz
- 15 V
VIN
Fig. 8 - Insertion Loss
E24-0223-Rev. L, 29-Apr-2024
Fig. 9 - Source Drain Capacitance
Document Number: 70062
10
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
APPLICATION HINTS
Overvoltage Protection
A very convenient form of overvoltage protection consists of
adding two small signal diodes (1N4148, 1N914 type) in
series with the supply pins (see figure 10). This arrangement
effectively blocks the flow of reverse currents. It also floats
the supply pin above or below the normal V+ or V- value. In
this case the overvoltage signal actually becomes the power
supply of the IC. From the point of view of the chip, nothing
has changed, as long as the difference VS - (V-) does not
exceed + 44 V. The addition of these diodes will reduce the
analog signal range to 1 V below V+ and 1 V above V-, but it
preserves the low channel resistance and low leakage
characteristics.
V+
1N4148
SX
D
Vg
DG408
1N4148
V-
Fig. 10 - Overvoltage Protection Using Blocking Diodes
Differential 4-Channel Sequential Multiplexer/Demultiplexer
8-Channel Sequential Multiplexer/Demultiplexer
+ 15 V
V+
S1
GND
V+
S1a
V-
S3
S4
DG408
D
NC
DM7493
QB
QC
S2b
QA
r01
r02 GND
NC
Db
S3b
A1
A2
S4b
A0
EN
QD
AIN
Differential
Analog
Outputs
(Inputs)
S1b
+ 15 V
BIN
Da
DG409
S7
Clock
In
V-
S4a
S6
+ 15 V
GND
S3a
Differential
Analog
Inputs
(Outputs)
S5
S8
A0
- 15 V
S2a
Analog
Output
(Input)
S2
Analog
Inputs
(Outputs)
+ 15 V
- 15 V
Clock
In
J
Q
1/2 MM74C73
CLK
K
CLEAR
+ 15 V
Q
GND
A1
EN
J
Q
1/2 MM74C73
CLK
NC
Q
K
NC
CLEAR
6
Enable In
Reset Enable
(MUX On-Off Control)
Fig. 11
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
11
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408, DG409
www.vishay.com
Vishay Siliconix
PRODUCT SUMMARY
Part number
DG408
DG408
DG408
DG409
DG409
Status code
2
2
2
2
2
2
8:1 x 1
8:1 x 1
8:1 x 1
4:1 x 2
4:1 x 2
4:1 x 2
Configuration
DG409
Single supply min. (V)
5
5
5
5
5
5
Single supply max. (V)
36
36
36
36
36
36
Dual supply min. (V)
5
5
5
5
5
5
Dual supply max. (V)
20
20
20
20
20
20
On-resistance ()
40
40
40
40
40
40
Charge injection (pC)
20
20
20
20
20
20
Source on capacitance (pF)
37
37
37
25
25
25
Source off capacitance (pF)
3
3
3
3
3
3
Leakage switch on typ. (nA)
-
-
-
-
-
-
Leakage switch off max. (nA)
0.5
0.5
0.5
0.5
0.5
0.5
-
-
-
-
-
-
Package
SO-16 (narrow)
AS
TSSOP-16
Plastic DIP-16
TSSOP-16
SO-16 (narrow)
AS
Plastic DIP-16
Functional circuit /
applications
Multi purpose,
Multi purpose,
Multi purpose,
Multi purpose,
Multi purpose,
Multi purpose,
instrumentation, instrumentation, instrumentation, instrumentation, instrumentation, instrumentation,
medical and
medical and
medical and
medical and
medical and
medical and
healthcare
healthcare
healthcare
healthcare
healthcare
healthcare
-3 dB bandwidth (MHz)
Interface
Parallel
Parallel
Parallel
Parallel
Parallel
Parallel
Single supply operation
Yes
Yes
Yes
Yes
Yes
Yes
Dual supply operation
Yes
Yes
Yes
Yes
Yes
Yes
Turn on time max. (ns)
150
150
150
150
150
150
Crosstalk and off isolation
-75
-75
-75
-75
-75
-75
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?70062.
E24-0223-Rev. L, 29-Apr-2024
Document Number: 70062
12
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
SOIC (NARROW):
16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
16
15
14
13
12
11
10
Dim
A
A1
B
C
D
E
e
H
L
Ĭ
9
E
1
2
3
4
5
6
7
8
INCHES
Min
Max
Min
Max
1.35
1.75
0.053
0.069
0.10
0.20
0.004
0.008
0.38
0.51
0.015
0.020
0.18
0.23
0.007
0.009
9.80
10.00
0.385
0.393
3.80
4.00
0.149
0.157
1.27 BSC
0.050 BSC
5.80
6.20
0.228
0.244
0.50
0.93
0.020
0.037
0_
8_
0_
8_
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
e
Document Number: 71194
02-Jul-01
B
A1
L
Ĭ
0.101 mm
0.004 IN
www.vishay.com
1
Package Information
Vishay Siliconix
PDIP: 16ĆLEAD
16
15
14
13
12
11
10
9
E
E1
1
2
3
4
5
6
7
8
D
S
Q1
A
A1
L
15°
MAX
C
B1
e1
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
Q1
S
B
eA
MILLIMETERS
Min
Max
INCHES
Min
Max
3.81
5.08
0.150
0.200
0.38
1.27
0.015
0.050
0.38
0.51
0.015
0.020
0.89
1.65
0.035
0.065
0.20
0.30
0.008
0.012
18.93
21.33
0.745
0.840
7.62
8.26
0.300
0.325
5.59
7.11
0.220
0.280
2.29
2.79
0.090
0.110
7.37
7.87
0.290
0.310
2.79
3.81
0.110
0.150
1.27
2.03
0.050
0.080
0.38
1.52
.015
0.060
ECN: S-03946—Rev. D, 09-Jul-01
DWG: 5482
Document Number: 71261
06-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
Nom
Max
A
-
1.10
1.20
A1
0.05
0.10
0.15
A2
-
1.00
1.05
0.38
B
0.22
0.28
C
-
0.127
-
D
4.90
5.00
5.10
E
6.10
6.40
6.70
E1
4.30
4.40
4.50
e
-
0.65
-
L
0.50
0.60
0.70
L1
0.90
1.00
1.10
y
-
-
0.10
θ1
0°
3°
6°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.171
0.014
0.026
0.012
(0.35)
(0.65)
(0.30)
(4.35)
(7.15)
0.281
0.055
(1.40)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
1
Document Number: 63550
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.152
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
(3.861)
0.246
(6.248)
0.047
(1.194)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024
工商网监
湘ICP备2023018690号
