DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
17 , +12 V / ± 5 V / +5 V / +3 V,
8-Ch / Dual 4-Ch High Performance Analog Multiplexers
DESCRIPTION
FEATURES
The DG408LE, DG409LE are monolithic analog
multiplexers / demultiplexers designed to operate on
single and dual supplies. Single supply voltage ranges from
3 V to 16 V while dual supply operation is recommended
with ± 3 V to ± 8 V.
• Pin-for-pin compatibility with DG408, DG409,
and DG508, DG509
Available
• 3 V to 16 V single supply or ± 3 V to ± 8 V dual
supply operation
• Low power consumption: 6 μA/max., EN = Vx = 5 V Available
• Lower on-resistance: RDS(on) - 17 typ.
Available
• Fast switching: tON - 55 ns, tOFF - 36 ns
• Break-before-make guaranteed
• Low leakage: IS(OFF) - 1 nA max.
• TTL, CMOS, LV logic (3 V) compatible
• -99 dB off-isolation and -98 dB crosstalk at 100 kHz
• Low parasitic capacitances: CS(OFF) = 5.5 pF,
CD(ON) = 35 pF (DG408LE)
• ESD Protection:
± 2.5 kV human body model
± 100 V machine model
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DG408LE is an 8 channel single-ended analog
multiplexer designed to connect one of eight inputs to
a common output as determined by a 3 bit binary address
(A0, A1, A2). The DG409LE is a dual 4 channel differential
analog multiplexer designed to connect one of four
differential inputs to a common dual output as determined
by its 2 bit binary address (A0, A1). Break-before-make
switching action to protect against momentary crosstalk
between adjacent channels.
An on channel conducts current equally well in both
directions. In the off state each channel blocks voltages up
to the power supply rails. An enable (EN) function allows the
user to reset the multiplexer / demultiplexer to all switches
off for stacking several devices. All control inputs, address
(Ax) and enable (EN) are TTL compatible over the full
specified operating temperature range.
The DG408LE, DG409LE feature low on-resistance, fast
switching time, and low leakage. They are ideal for data
acquisition, control and automation, test instrument, and
healthcare products. The DG408LE, DG409LE has an
internal regulator powers the logic circuit. Such design
reduces device power consumption and makes them ideal
for battery operated applications.
The DG408LE, DG409LE are available in TSSOP16,
SOIC16, and QFN16 packages.
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
BENEFITS
•
•
•
•
High accuracy
Single and dual power rail capacity
Wide operating voltage range
Simple logic interface
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
Automatic test equipment
Data acquisition systems
Meters and instruments
Medical and healthcare systems
Communication systems
Audio and video signal routing
Relay replacement
Battery powered systems
Computer peripherals
Audio and video signal routing
FUNCTIONAL BLOCK DIAGRAMS AND PIN CONFIGURATIONS
DG408LE
A0
EN
VS1
S2
S3
S4
D
Dual-In- Line, SOIC and TSSOP
16
1
2
Decoders/Drivers
15
3
14
4
13
5
12
6
11
7
10
8
9
Top View
S16-0389-Rev.A, 07-Mar-16
DG409LE
Dual-In- Line, SOIC and TSSOP
A1
A0
A2
EN
GND
V-
V+
S1a
S5
S2a
S6
S3a
S7
S4a
S8
Da
16
1
2
Decoders/Drivers
15
3
14
4
13
5
12
6
11
7
10
8
9
A1
GND
V+
S1b
S2b
S3b
S4b
Db
Top View
Document Number: 78084
1
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
QFN OUTLINE
DG408LE QFN16
(3 mm x 3 mm)
EN
A0
A1
A2
16
15
14
13
Decoder/Driver
DG409LE QFN16
(3 mm x 3 mm)
EN
A0
A1 GND
16
15
14
13
Decoder/Driver
12 GND
V-
1
S1 2
11 V+
S1a
2
11 S1b
S2 3
10 S5
S2a
3
10 S2b
S3 4
9
S6
S3a
4
9
V-
1
12 V+
5
6
7
8
5
6
7
8
S4
D
S8
S7
S4a
Da
Db
S4b
TRUTH TABLE (DG408LE)
S3b
TRUTH TABLE (DG409LE)
A2
A1
A0
EN
ON SWITCH
A1
A0
EN
ON SWITCH
X
X
X
0
None
X
X
0
None
0
0
0
1
1
0
0
1
1
0
0
1
1
2
0
1
1
2
0
1
0
1
3
1
0
1
3
0
1
1
1
4
1
1
1
4
1
0
0
1
5
1
0
1
1
6
1
1
0
1
7
1
1
1
1
8
Note
• For low and high voltage levels for VAX and VEN consult “Digital Control” parameters for specific V+ operation.
ORDERING INFORMATION
TEMP. RANGE
CONFIGURATION
PACKAGE
16-pin TSSOP
8 Channel
Single Ended
DG408LE
-40 °C to +85 °C
Lead-free
16-pin SOIC
16-pin QFN
(3 mm x 3 mm)
Variation 2
16-pin TSSOP
Dual 4 Channel
Differential
DG409LE
16-pin SOIC
16-pin QFN
(3 mm x 3 mm)
Variation 2
PART NUMBER
MIN. ORDER / PACK. QUANTITY
DG408LEDQ-GE3
Tube 360 units
DG408LEDQ-T1-GE3
Tape and reel, 3000 units
DG408LEDY-GE3
Tube 500 units
DG408LEDY-T1-GE3
Tape and reel, 2500 units
DG408LEDN-T1-GE4
Tape and reel, 2500 units
DG409LEDQ-GE3
Tube 360 units
DG409LEDQ-T1-GE3
Tape and reel, 3000 units
DG409LEDY-GE3
Tube 500 units
DG409LEDY-T1-GE3
Tape and reel, 2500 units
DG409LEDN-T1-GE4
Tape and reel, 2500 units
Note
• -T1 indicates tape and reel, -GE3 indicates lead (Pb)-free and RoHS-compliant, NO -GE3 indicates standard tin/lead finish.
• Exposed pad of QFN package can be connected to GND, V-, or left floating.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
2
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
PARAMETER
V+ to
LIMIT
V- e
18
GND to VDigital
Inputs a,
UNIT
-18
VS, VD
(V-) - 0.3 to (V) + 0.3
Current (any terminal)
30
Peak Current, S or D (pulsed at 1 ms, 10 % duty cycle max.)
100
Storage Temperature
Power Dissipation (package) b
V
(D suffix)
-65 to +125
16-pin plastic TSSOP c
600
16-pin narrow SOIC c
600
16-pin miniQFN
d
mA
°C
mW
1385
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC® JS-001
2500
V
Latch Up Current, per JESD78D
300
mA
Notes
a. Signals on SX, DX, AX, or EN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 8 mW/°C above 75 °C.
d. Derate 17.3 mW/°C above 70 °C
e. Also applies when V- = GND
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
3
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (Single Supply 12 V)
PARAMETER
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
RDS(on) Matching
Between Channels g
On-Resistance Flatness
Switch Off Leakage
Current a
Channel On Leakage
Current a
Digital Control
Logic High Input Voltage
Logic Low Input Voltage
Input Current a
Dynamic Characteristics
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 12 V, ± 10 %, V- = 0 V
VEN = 0.8 V or 2.4 V f
VANALOG
RDS(on)
RDS
RFLAT(on)
IS(off)
ID(on)
ID(on)
VINH
VINL
IIN
VD = 10.8 V, VD = 2 V or 9 V, IS = 10 mA
sequence each switch on
VD = 10.8 V, VD = 2 V or 9 V
IS = 10 mA
VEN = 0 V, VD = 11 V or 1 V
VS = 1 V or 11 V
VS = VD = 1 V or 11 V
VAX = VEN = 2.4 V or 0.8 V
TEMP. b
TYP. d
D SUFFIX
-40 °C to +85 °C
MIN. c
MAX. c
Full
Room
Full
17
-
0
-
12
23
27
Room
1
-
3
Room
Room
Full
Room
Full
Room
Full
3
-
-1
-5
-1
-5
-1
-5
6.5
1
5
1
5
1
5
Full
Full
Full
-
2.4
-1
0.8
1
85
-
100
tTRANS
VS1 = 8 V, VS8 = 0 V, (DG408LE)
VS1b = 8 V, VS4b = 0 V, (DG409LE)
see figure 2
Room
Transition Time
Full
-
-
110
Break-Before-Make Time
tOPEN
VS(all) = VDA = 5 V
see figure 4
Room
Full
Room
Full
Room
Full
Room
Room
Room
Room
Room
Room
34
55
36
-11
-10
-99
-87
-98
-109
1
-
72
82
47
50
-
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
VAX = 0 V, VS1 = 5 V (DG408LE)
VAX = 0 V, VS1b = 5 V (DG409LE)
see figure 3
UNIT
V
nA
V
μA
ns
Charge Injection e (DG408LE)
Q
CL = 1 nF, VGEN = 6 V, RGEN = 0
pC
Charge Injection e (DG409LE)
Off Isolation e, h (DG408LE)
OIRR
Off Isolation e, h (DG409LE)
f = 100 kHz, RL = 50
dB
e
Crosstalk (DG408LE)
X
TALK
Crosstalk e (DG409LE)
Source Off Capacitance e
Room
5.5
(DG408LE)
CS(off)
f = 1 MHz, VS = 0 V, VEN = 0 V
e
Source Off Capacitance
Room
5.5
(DG409LE)
e
Drain Off Capacitance
Room
25
(DG408LE)
CD(off)
f = 1 MHz, VD = 2.4 V, VEN = 0 V
pF
Drain Off Capacitance e
Room
13.5
(DG409LE)
Drain On Capacitance
Room
35
(DG408LE)
f = 1 MHz, VD = 0 V, VEN = 2.4 V
CD(on)
(DG409LE only)
Drain On Capacitance e
Room
23.5
(DG409LE)
Power Supplies
Power Supply Range
V+
3
12
V
Power Supply Current
I+
VEN = VA = 0 V or 5 V
Room
3.5
6
μA
Notes
a. Leakage parameters are guaranteed by worst case test condition and not subject to production test.
b. Room = 25 °C, Full = as determined by the operating temperature suffix.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on Channel 4 do to proximity to the drain pin.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
4
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (Dual Supply V+ = 5 V, V - = -5 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 5 V, ± 10 %, V- = -5 V
VEN = 0.6 V or 2.4 V f
TEMP. b
TYP. d
D SUFFIX
-40 °C to +85 °C
MIN. c
UNIT
MAX. c
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
Switch Off Leakage
Current a
VANALOG
RDS(on)
IS(off)
ID(off)
Channel On Leakage
Current a
ID(on)
VD = ± 3.5 V, IS = 10 mA
sequence each switch on
V+ = 5.5, V- = 5.5 V
VEN = 0 V, VD = ± 4.5 V, VS = ± 4.5 V
V+ = 5.5 V, V- = -5.5 V
VEN = 2.4 V, VD = ± 4.5 V, VS = ± 4.5 V
Full
-
-5
5
V
Room
15
-
25
Full
-
-
30
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
nA
Digital Control
Logic High Input Voltage
VINH
Full
-
2.4
-
Logic Low Input Voltage
VINL
Full
-
-
0.6
Input Current a
IIN
VAX = VEN = 2.4 V or 0.6 V
Full
-
-1
1
VS1 = 3.5 V, VS8 = -3.5 V, (DG408LE)
VS1b = 3.5 V, VS4b = -3.5 V, (DG409LE)
see figure 2
Room
87
-
100
tTRANS
Full
-
-
120
VS(all) = VDA = 3.5 V
see figure 4
Room
84
1
-
V
μA
Dynamic Characteristics
Transition Time
Break-Before-Make Time
Enable Turn-On Time
Enable Turn-Off Time
Source Off Capacitance e
(DG408LE)
Source Off Capacitance e
(DG409LE)
tOPEN
tON(EN)
tOFF(EN)
CS(off)
VAX = 0 V, VS1 = 3.5 V (DG408LE)
VAX = 0 V, VS1b = 3.5 V (DG409LE)
see figure 3
Drain Off Capacitance e
(DG409LE)
Drain On Capacitance e
(DG408LE)
Drain On Capacitance e
(DG409LE)
CD(off)
CD(on)
-
-
-
58
-
73
80
Full
-
-
Room
31
-
46
Full
-
-
51
Room
6
-
-
Room
5.5
-
-
Room
26
-
-
Room
14
-
-
Room
36
-
-
Room
24
-
-
ns
f = 1 MHz, VS = 0 V, VEN = 0 V
Capacitance e
Drain Off
(DG408LE)
Full
Room
pF
f = 1 MHz, VD = 0 V, VEN = 0 V
f = 1 MHz, VD = 0 V, VEN = 2.4 V
Notes
a. Leakage parameters are guaranteed by worst case test condition and not subject to production test.
b. Room = 25 °C, full = as determined by the operating temperature suffix.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on channel 4 do to proximity to the drain pin.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
5
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (Single Supply 5 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 5 V, ± 10 %, V- = 0 V
VEN = 0.6 V or 2.4 V f
TEMP.
b
TYP. d
D SUFFIX
-40 °C to +85 °C
MIN. c
UNIT
MAX. c
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
RDS(on) Matching Between
Channels g
On-Resistance Flatness
Switch Off Leakage
Current a
VANALOG
RDS(on)
RDS
RFLAT(on)
IS(off)
ID(off)
Channel On Leakage
Current a
ID(on)
Full
-
0
5
V+ = 4.5 V, VD or VS = 1 V or 3.5 V,
IS = 5 mA
Room
28
-
36
Full
-
-
41
V+ = 4.5 V, VD = 1 V or 3.5 V,
IS = 5 mA
Room
1
-
3
V+ = 5.5 V, VS = 1 V or 4 V
VD = 4 V or 1 V
V+ = 5.5 V, VD = VS = 1 V or 4 V
sequence each switch on
Room
-
-
4
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
Full
-
2.4
-
Full
-
-
0.6
V
nA
Digital Control
Logic High Input Voltage
VINH
Logic Low Input Voltage
VINL
Input Current a
V+ = 5 V
IIN
VAX = VEN = 2.4 V or 0.6 V
Full
-
-1
1
113
-
135
tTRANS
VS1 = 3.5 V, VS8 = 0 V, (DG408LE)
VS1b = 3.5 V, VS4b = 0 V, (DG409LE)
see figure 2
Room
Transition Time
Full
-
-
165
Break-Before-Make Time
tOPEN
VS(all) = VDA = 3.5 V,
see figure 4
Room
75
1
-
Full
-
-
-
Room
77
-
89
Full
-
-
110
Room
43
-
50
V
μA
Dynamic Characteristics
Enable Turn-On Time
Enable Turn-Off Time
Charge Injection e (DG408LE)
Charge Injection e (DG409LE)
Off Isolation e, h (DG408LE)
Off Isolation e, h (DG409LE)
Crosstalk e (DG408LE)
tON(EN)
tOFF(EN)
Q
VAX = 0 V, VS1 = 3.5 V (DG408LE)
VAX = 0 V, VS1b = 3.5 V (DG409LE)
see figure 3
CL = 1 nF, RGEN = 0 , VGEN = 2.5 V
OIRR
f = 100 kHz, RL = 50
XTALK
Full
-
-
53
Room
-2
-
-
Room
-2
-
-
Room
-100
-
-
Room
-83
-
-
Room
-101
-
-
ns
pC
dB
Crosstalk e (DG409LE)
Room
-108
Source Off Capacitance e
Room
6.5
(DG408LE)
f = 1 MHz, VS = 0 V, VEN = 0 V
CS(off)
Source Off Capacitance e
Room
6.5
(DG409LE)
Drain Off Capacitance e
Room
30
(DG408LE)
CD(off)
pF
f = 1 MHz, VD = 0 V, VEN = 0 V
Drain Off Capacitance e
Room
16
(DG409LE)
Drain On Capacitance e
Room
40
(DG408LE)
CD(on)
f = 1 MHz, VD = 0 V, VEN = 2.4 V
Drain On Capacitance e
Room
26.5
(DG409LE)
Notes
a. Leakage parameters are guaranteed by worst case test condition and not subject to production test.
b. Room = 25 °C, full = as determined by the operating temperature suffix.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on channel 4 do to proximity to the drain pin.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
6
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (Single Supply 3 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 3 V, ± 10 %, V- = 0 V
VEN = 0.4 V or 2 V f
TEMP. b
TYP. d
D SUFFIX
-40 °C to +85 °C
MIN. c
UNIT
MAX. c
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
Switch Off Leakage
Current a
VANALOG
RDS(on)
V+ = 2.7 V, VD = 0.5 or 2.2 V,
IS = 5 mA
IS(off)
V+ = 3.3 V, VS = 2 or 1 V, VD = 1 or 2 V
ID(off)
Channel On Leakage
Current a
ID(on)
V+ = 3.3 V, VD = VS = 1 V or 2 V
sequence each switch on
Full
-
0
3
V
Room
63
-
80
Full
-
-
92
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
Room
-
-1
1
Full
-
-5
5
nA
Digital Control
Logic High Input Voltage
VINH
Full
-
2
-
Logic Low Input Voltage
VINL
Full
-
-
0.4
Input Current a
IIN
VAX = VEN = 2.4 V or 0.4 V
Full
-
-1
1
VS1 = 1.5 V, VS8 = 0 V, (DG408LE)
VS1b = 1.5 V, VS4b = 0 V, (DG409LE)
see figure 2
Room
211
-
275
tTRANS
Full
-
-
300
VS(all) = VDA = 1.5 V,
see figure 4
Room
209
1
-
Full
-
-
-
Room
125
-
150
V
μA
Dynamic Characteristics
Transition Time
Break-Before-Make Time
Enable Turn-On Time
Enable Turn-Off Time
Charge Injectione (DG408LE)
Charge Injectione (DG409LE)
Off Isolation e, h (DG408LE)
Off Isolation e, h (DG409LE)
Crosstalk e
(DG408LE)
Crosstalk e (DG409LE)
Source Off Capacitance e
(DG408LE)
Source Off Capacitance e
(DG409LE)
Drain Off Capacitance e
(DG408LE)
Drain Off Capacitance e
(DG409LE)
Drain On Capacitance e
(DG408LE)
Drain On Capacitance e
(DG409LE)
tOPEN
tON(EN)
tOFF(EN)
Q
VAX = 0 V, VS1 = 1.5 V (DG408LE)
VAX = 0 V, VS1b = 1.5 V (DG409LE)
see figure 3
CL = 1 nF, RGEN = 0 , VGEN = 1.5 V
OIRR
f = 100 kHz, RL = 50
XTALK
CS(off)
CD(off)
CD(on)
Full
-
-
180
Room
45
-
75
Full
-
-
95
Room
0
-
-
Room
-0.4
-
-
Room
-90
-
-
Room
-95
-
-
Room
-95
-
-
Room
-93
-
-
Room
7
-
-
Room
7
-
-
Room
33
-
-
Room
18
-
-
Room
43
-
-
Room
28
-
-
ns
pC
dB
f = 1 MHz, VS = 0 V, VEN = 0 V
pF
f = 1 MHz, VD = 0 V, VEN = 0 V
f = 1 MHz, VD = 0 V, VEN = 2 V
Notes
a. Leakage parameters are guaranteed by worst case test condition and not subject to production test.
b. Room = 25 °C, full = as determined by the operating temperature suffix.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on channel 4 do to proximity to the drain pin.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
7
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
25
65
RDS(on) - Drain-Source On-Resistance ()
RDS(on) - Drain-Source On-Resistance ()
70
V+ = 3.3 V
60
55
50
45
40
35
V+ = 5 V
30
V+ = 12 V
25
20
15
10
V+ = +5 V
V- = -5 V
20
15
10
0
1
2
3
4
5
6
7
8
9
VD - Drain Voltage (V)
-5
10 11 12
-4
-2
-1
0
1
2
3
4
5
VD - Drain Voltage (V)
RDS(on) vs. VD and Power Supply
RDS(on) vs. VD and Power Supply
30
50
V+ = 5 V, V- = - 5 V
45
V+ = 5 V, V- = 0 V
25
RDS - On-Resistance ()
RDS(on) - Drain-Source On-Resistance ()
-3
25 °C
85 °C
20
15
40
85 C
35
30
25 C
25
10
- 40 C
20
-40 °C
5
15
VD - Drain Voltage (V)
2
3
4
VD - Drain Voltage (V)
RDS(on) vs. VD and Temperature (Dual Supply)
RDS(on) vs. VD and Temperature
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
0
6
1.8
1
5
6
180
160
Switching Speed (ns)
1.7
1.6
VT (V)
Upper Threshold Limit
1.5
Lower Threshold Limit
1.4
140
tTRANS
tON
120
100
80
60
1.3
tOFF
40
20
1.2
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
V+ - Positive Supply Voltage (V)
V+ - Positive Supply Voltage(V)
Input Threshold vs. V+ Supply Voltage
Switching Time vs. Supply Voltage
S16-0389-Rev.A, 07-Mar-16
12
Document Number: 78084
8
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
5
100
0
Q - Charge Injection (pC)
Leakage Current (pA)
50
Is(off)
0
Id(on)
-50
Id(off)
V+ = 5 V
-5
V+ = +/- 5 V
-10
V+ = 12 V
-100
-15
-150
-5.5 -4.5 -3.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5
VD, VS – Analog Voltage (V)
-20
-5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
Vs - Source Voltage (V)
Leakage Current vs. Analog Voltage
Charge Injection vs. Analog Voltage (DG408LE)
10
10
Insertion Loss (-3 dB = 39 MHz)
-10
V+ = 5 V, V- = 0
-30
0
Loss (dB)
Q - Charge Injection (pC)
5
V+ = 5 V
-5
Off Isolation
-50
Crosstalk
V+ = 12 V
-70
V+ = +/- 5 V
-10
-90
-110
-15
-5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
Vs - Source Voltage (V)
Charge Injection vs. Analog Voltage (DG409LE)
0
1
10
Frequency (MHz)
100
1000
Insertion Loss, Off Isolation, and Crosstalk vs. Frequency
CD, CS – Drain/SourceCapacitance (pF)
50
V+ = 12 V, V- = 0 V
45
Id(on)
40
35
30
25
20
Id(off)
15
Is(off)
10
5
0
0
1
2
3
4
5
6
7
8
9
10 11 12
Drain/Source Capacitance vs. Analog Voltage (DG408L)
Drain/Source Capacitance vs. Analog Voltage (DG408LE)
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
9
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
SCHEMATIC DIAGRAM (Typical Channel)
V+
Voltage Regulator
D
A0
VBody
Snatcher
GND
Level
Shift
AX
V+
V-
Decode/
Drive
S1
VEN
Sn
V-
V-
Fig. 1
TEST CIRCUITS
V+
V+
A2
S1
A1
50
A0
3V
EN
VS1
S2 - S7
DG408LE S8
VS8
VO
D
GND
V35 pF
300
Logic
Input
VAX
tr < 20 ns
tf < 20 ns
3V
50 %
0V
VVS8
VO
A1
A0
50
90 %
VS1
S1a - S4a, Da
V+
S4b
tTRANS
VSB4
VO
Db
EN
GND
50 %
VS1
S1b
DG409LE
3V
90 %
Switch
Output
V+
V300
35 pF
S1 ON
tTRANS
S8 ON (DG408LE)
or
S4 ON (DG409LE)
V-
Fig. 2 - Transition Time
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
10
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
V+
V+
VS1
S1
EN
S2 - S8
A0
DG408LE
A1
A2
GND
VO
D
V-
50
300
Logic
Input
tr < 20 ns
tf < 20 ns
50 %
3V
50 %
0V
35 pF
VVO
90 %
90 %
V+
Switch
Output
VO
V+
VS1
S1b
0V
EN
tON(EN)
S1a - S4a, Da
S2b - S4b
A0
tOFF(EN)
DG409LE
A1
Db
GND
VO
V-
50
300
35 pF
V-
Fig. 3 - Enable Switching Time
bbm.5
3V
V+
EN
4/9
VS1
All S and Da
A0
Logic
Input
tr < 20 ns
tf < 20 ns
3V
50 %
0V
DG408LE
DG409LE
A1
A2
Db, D
GND
50
VO
VS
V-
V-
300
80 %
Switch
Output
35 pF
VO
0V
tOPEN
Fig. 4 - Break-Before-Make Interval
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
11
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG408LE, DG409LE
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
V+
Rg
V+
SX
Logic
Input
EN
Vg
A0
Channel
Select
D
A1
GND
ON
OFF
0V
VO
CL
1 nF
A2
3V
Switch
Output
V-
VO
VO
VO is the measured voltage due to charge transfer
error Q, when the channel turns off.
V-
Q = CL x VO
Fig. 5 - Charge Injection
V+
V+
VIN
VIN
V+
SX
VS
SX
VS
Rg = 50
S8
A0
D
A2
GND
RL
50
V-
EN
S8
VO
A1
V+
S1
A0
Rg = 50
D
VO
A1
A2
EN
GND
RL
50
V-
VV-
VOUT
Off Isolation = 20 log
Crosstalk = 20 log
VIN
VOUT
VIN
Fig. 6 - Off Isolation
Fig. 7 - Crosstalk
V+
V+
VS
V+
S1
V+
Rg = 50
A0
D
VO
A1
A2
GND
EN
V-
S1
Meter
A2
Channel
Select
A0
RL
50
D
GND
VInsertion Loss = 20 log
S8
A1
VOUT
EN
V-
HP4192A
Impedance
Analyzer
or Equivalent
f = 1 MHz
V-
VIN
Fig. 8 - Insertion Loss
Fig. 9 - Source Drain Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?78084.
S16-0389-Rev.A, 07-Mar-16
Document Number: 78084
12
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
SOIC (NARROW):
16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
16
15
14
13
12
11
10
Dim
A
A1
B
C
D
E
e
H
L
Ĭ
9
E
1
2
3
4
5
6
7
8
INCHES
Min
Max
Min
Max
1.35
1.75
0.053
0.069
0.10
0.20
0.004
0.008
0.38
0.51
0.015
0.020
0.18
0.23
0.007
0.009
9.80
10.00
0.385
0.393
3.80
4.00
0.149
0.157
1.27 BSC
0.050 BSC
5.80
6.20
0.228
0.244
0.50
0.93
0.020
0.037
0_
8_
0_
8_
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
e
Document Number: 71194
02-Jul-01
B
A1
L
Ĭ
0.101 mm
0.004 IN
www.vishay.com
1
Package Information
www.vishay.com
Vishay Siliconix
QFN-16 Lead (3 x 3)
D2
D2/2
Terminal Tip
D
(3)
- B-
D/2
L
E/2
E2/2
e
E
E2
C
3xe
0.25
- A-
Exposed Pad (4)
4xb
0.10
M
C
A
B
(3)
0.25
C
3xe
TOP VIEW
BOTTOM VIEW
// 0.10
C
0.08
C
A
(4) NX
A1
SEATING
PLANE
- C-
A3
SIDE VIEW
Notes
(1) All dimensions are in millimeters.
(2) N is the total number of terminals.
(3) Dimension b applies to metallized terminal and is measured between 0.25 and 0.30 mm from terminal tip.
(4) Coplanarity applies to the exposed heat sink slug as well as the terminal.
(5) The pin #1 identifier may be either a mold or marked feature, it must be located within the zone indicated.
VARIATION 1
DIM.
MILLIMETERS
VARIATION 2
INCHES
MILLIMETERS
INCHES
MIN.
NOM
MAX.
MIN.
NOM
MAX.
MIN.
NOM
MAX.
MIN.
NOM
MAX.
A
0.80
0.90
1.00
0.031
0.035
0.039
0.80
0.90
1.00
0.031
0.035
0.039
0.012
b
0.18
0.23
0.30
0.007
0.009
0.012
0.18
0.25
0.30
0.007
0.010
D
2.90
3.00
3.10
0.114
0.118
0.122
2.90
3.00
3.10
0.114
0.118
0.122
D2
1.00
1.15
1.25
0.039
0.045
0.049
1.50
1.70
1.80
0.059
0.067
0.071
E
2.90
3.00
3.10
0.114
0.118
0.122
2.90
3.00
3.10
0.114
0.118
0.122
E2
1.00
1.15
1.25
0.039
0.045
0.049
1.50
1.70
1.80
0.059
0.067
0.071
0.50
0.012
0.020
0.30
0.50
0.012
e
L
0.50 BSC
0.30
0.40
0.020 BSC
0.50 BSC
0.016
0.40
0.020 BSC
0.016
0.020
ECN: T16-0233-Rev. D, 09-May-16
DWG: 5899
Revision: 09-May-16
1
Document Number: 72208
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
Nom
Max
A
-
1.10
1.20
A1
0.05
0.10
0.15
A2
-
1.00
1.05
0.38
B
0.22
0.28
C
-
0.127
-
D
4.90
5.00
5.10
E
6.10
6.40
6.70
E1
4.30
4.40
4.50
e
-
0.65
-
L
0.50
0.60
0.70
L1
0.90
1.00
1.10
y
-
-
0.10
θ1
0°
3°
6°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.171
0.014
0.026
0.012
(0.35)
(0.65)
(0.30)
(4.35)
(7.15)
0.281
0.055
(1.40)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
1
Document Number: 63550
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.152
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
(3.861)
0.246
(6.248)
0.047
(1.194)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
工商网监
湘ICP备2023018690号
