D, G
www.vishay.com
Vishay Dale
Carbon Film Resistors, Special Purpose, High Voltage
FEATURES
• Ratings to 100 W, 125 kV
• Available with either radial bands or ferrule terminals
• Standard models epoxy/enamel coated, additional vinyl
heat shrink sleeve available for added protection
• Model G is non-inductive
• ± 20 % tolerance standard, tolerances of ± 15 %, ± 10 %
and ± 5 % available
• See models B and T for general purpose high voltage
carbon film resistors
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
P70 °C
W
10
20
20
30
30
60
60
35
35
100
100
10
20
20
30
30
60
60
35
35
100
100
HISTORICAL
MODEL
MAXIMUM WORKING
VOLTAGE (1)
V
25K
35K
35K
65K
65K
90K
90K
40K
40K
125K
125K
16K
18K
18K
25K
25K
30K
30K
20K
20K
32K
32K
RESISTANCE
RANGE (2)
50K to 500M
100K to 500M
100K to 500M
100K to 500M
100K to 500M
400K to 500M
400K to 500M
300K to 500M
300K to 500M
700K to 500M
700K to 500M
1K to 1M
1K to 1M
1K to 1M
1K to 1M
1K to 1M
1K to 5M
1K to 5M
1K to 1M
1K to 1M
1K to 10M
1K to 10M
TOLERANCE (3)
±%
DJU
DJU
DPW
DPW
DPW..1
DPW-1
DPX
DPX
DPX..1
DPX-1
DVY
DVY
DVY..1
DVY-1
DZW
DZW
DZW..1
DZW-1
DZZ
DZZ
DZZ..1
DZZ-1
GJU
GJU
GPW
GPW
GPW..1
GPW-1
GPX
GPX
GPX..1
GPX-1
GVY
GVY
GVY..1
GVY-1
GZW
GZW
GZW..1
GZW-1
GZZ
GZZ
GZZ..1
GZZ-1
Notes
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
(2) All resistance values are calibrated at 100 V -calibration at other voltages available on request.
DC
(3) ± 20 % standard, ± 5 %, ± 10 %, and ± 15 % are available.
STYLE
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
5, 10, 15, 20
3
3
4
3
4
3
4
3
4
3
4
3
3
4
3
4
3
4
3
4
3
4
Non-Inductive
GLOBAL
MODEL
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DPW2M50LB191 (preferred part numbering format)
D
P
W
2
GLOBAL MODEL
RESISTANCE VALUE
(See Standard Electrical
Specifications table)
R=Ω
K = kΩ
M = MΩ
100R = 100 Ω
13K0 = 13 kΩ
500M = 500 MΩ
M
5
0
TOLERANCE
CODE
J=±5%
K = ± 10 %
L = ± 15 %
M = ± 20 %
L
B
1
9
PACKAGING
SPECIAL
E19 = Lead (Pb)-free, Bulk
(all, except DJU, GJU)
E03 = Lead (Pb)-free, Skin
(DJU, GJU only)
B19 = Tin/Lead, Bulk
(all, except DJU, GJU)
J03 = Tin/Lead, Skin
(DJU, GJU only)
Historical Part Number example: DPW-12M50L (will continue to be accepted)
DPW-1
2M50
HISTORICAL MODEL
RESISTANCE VALUE
1
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 to 999 as applicable
1 = Ferrule Terminals
L
TOLERANCE CODE
B19
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 22-Oct-12
Document Number: 31040
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D, G
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
Style 3
0.172 (4.37)
Dia.
Style 4
0.313 (7.95)
A
GLOBAL
MODEL
DJU
DPW
DPW..1
DPX
DPX..1
DVY
DVY..1
DZW
DZW..1
DZZ
DZZ..1
GJU
GPW
GPW..1
GPX
GPX..1
GVY
GVY..1
GZW
GZW..1
GZZ
GZZ..1
0.516 (13.11)
0.781
(19.84)
A
C
B
B
D
STYLE
A
B (1)
C
D
3
3
4
3
4
3
4
3
4
3
4
3
3
4
3
4
3
4
3
4
3
4
4.50 (114.30)
6.50 (165.10)
7.69 (195.33)
10.50 (266.70)
11.69 (296.93)
14.50 (368.30)
15.69 (398.53)
6.50 (165.10)
7.69 (195.33)
18.50 (469.90)
19.69 (500.13)
4.50 (114.30)
6.50 (165.10)
7.69 (195.33)
10.50 (266.70)
11.69 (296.93)
14.50 (368.30)
15.69 (398.53)
6.50 (165.10)
7.69 (195.33)
18.50 (469.90)
19.69 (500.13)
0.750 (19.05)
1.13 (28.70)
1.13 (28.70)
1.13 (28.70)
1.13 (28.70)
1.50 (38.10)
1.50 (38.10)
2.0 (50.80)
2.0 (50.80)
2.0 (50.80)
2.0 (50.80)
0.750 (19.05)
1.13 (28.70)
1.13 (28.70)
1.13 (28.70)
1.13 (28.70)
1.50 (38.10)
1.50 (38.10)
2.0 (50.80)
2.0 (50.80)
2.0 (50.80)
2.0 (50.80)
0.50 (12.70)
0.75 (19.05)
N/A
0.75 (19.05)
N/A
1.13 (28.70)
N/A
1.56 (39.62)
N/A
1.56 (39.62)
N/A
0.50 (12.70)
0.75 (19.05)
N/A
0.75 (19.05)
N/A
1.13 (28.70)
N/A
1.56 (39.62)
N/A
1.56 (39.62)
N/A
N/A
N/A
0.812 (20.62)
N/A
0.812 (20.62)
N/A
1.14 (28.96)
N/A
1.14 (28.96)
N/A
1.14 (28.96)
N/A
N/A
0.812 (20.62)
N/A
0.812 (20.62)
N/A
1.14 (28.96)
N/A
1.14 (28.96)
N/A
1.14 (28.96)
Note
(1) Dimensional tolerances are ± 0.016" (0.406 mm) or ± 1 %, whichever is greater.
RATED POWER IN %
DERATING
120
100
80
60
40
20
0
0
20
25
40
60
80
100 120 140
160
180
AMBIENT TEMPERATURE IN °C
MARKING
- Dale
- Model
- Value
- Tolerance
- Date code
Revision: 22-Oct-12
Document Number: 31040
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
