ES2A, ES2B, ES2C, ES2D
www.vishay.com
Vishay General Semiconductor
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Glass passivated pellet chip junction
• Ideal for automated placement
• Ultrafast recovery times for high efficiency
• Low forward voltage, low power losses
Available
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
SMB (DO-214AA)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
2.0 A
VRRM
50 V, 100 V, 150 V, 200 V
IFSM
50 A
trr
20 ns
VF
0.90 V
TJ max.
150 °C
Package
SMB (DO-214AA)
Diode variations
Single
MECHANICAL DATA
Case: SMB (DO-214AA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHME3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
ES2A
ES2B
ES2C
ES2D
EA
EB
EC
ED
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
V
Maximum RMS voltage
VRMS
35
70
105
140
V
Maximum DC blocking voltage
VDC
50
100
150
200
V
Maximum average forward rectified current at TL = 110 °C
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
50
A
TJ, TSTG
-55 to +150
°C
Operating junction and storage temperature range
Revision: 21-Jul-17
Document Number: 88587
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ES2A, ES2B, ES2C, ES2D
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward
voltage
SYMBOL
VF (1)
2.0 A
TA = 25 °C
Maximum DC reverse current at rated
DC blocking voltage
IR
TA = 100 °C
Max. reverse recovery time
IF = 0.5 A, IR = 1.0 A,
lrr = 0.25 A
Maximum reverse recovery time
IF = 2.0 A, VR = 30 V,
dI/dt = 50 A/μs, Ir = 10 % IRM
Maximum stored charge
IF = 2.0 A, VR = 30 V,
dI/dt = 50 A/μs, Ir = 10 % IRM
Typical junction capacitance
4.0 V, 1 MHz
trr
TJ = 25 °C
trr
TJ = 100 °C
TJ = 25 °C
Qrr
TJ = 100 °C
ES2A
ES2B
ES2C ES2D
0.90
10
350
20
30
50
10
25
UNIT
V
μA
ns
ns
nC
CJ
18
pF
SYMBOL
ES2A ES2B ES2C ES2D
UNIT
RθJA (1)
75
RθJL (1)
20
Note
(1) Pulse test: 300 ms pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
°C/W
Note
(1) Units mounted on PCB 5.0 mm x 5.0 mm (0.013 mm thick) land areas
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.096
52T
750
7" diameter plastic tape and reel
ES2D-E3/5BT
0.096
5BT
3200
13" diameter plastic tape and reel
ES2DHE3_A/H (1)
0.096
H
750
7" diameter plastic tape and reel
ES2DHE3_A/I (1)
0.096
I
3200
13" diameter plastic tape and reel
ES2D-M3/52T
0.096
52T
750
7" diameter plastic tape and reel
ES2D-M3/5BT
0.096
5BT
3200
13" diameter plastic tape and reel
ES2DHM3_A/H (1)
0.096
H
750
7" diameter plastic tape and reel
ES2DHM3_A/I (1)
0.096
I
3200
13" diameter plastic tape and reel
ES2D-E3/52T
Note
(1) AEC-Q101 qualified
Revision: 21-Jul-17
Document Number: 88587
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ES2A, ES2B, ES2C, ES2D
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10 000
Instantaneous Reverse Leakage
Current (µA)
Average Forward Rectified Current (A)
3.0
2.0
1.0
Resistive or Inductive Load
P.C.B. Mounted on
0.2" x 0.2" (5.0 mm x 5.0 mm)
Copper Pad Areas
TJ = 125 °C
TJ = 100 °C
100
10
TJ = 25 °C
1
0.1
0
80
90
100
110
120
130
140
0
150
20
40
60
80
Lead Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
60
8.3 ms Single Half Sine-Wave
at TL = 110 °C
Junction Capacitance (pF)
50
40
30
20
10
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
50
40
30
20
10
0
1
10
100
0.1
1
10
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
100
Percent of Rated Peak Reverse Voltage (%)
60
Peak Forward Surge Current (A)
TJ = 150 °C
1000
TJ = 150 °C
10
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 25 °C
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
100
100
Junction to Ambient
10
1
Mounted on 5.0 mm x 5.0 mm copper pad
0.1
0.001
0.1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Transient Thermal Impedance
1000
Revision: 21-Jul-17
Document Number: 88587
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ES2A, ES2B, ES2C, ES2D
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMB (DO-214AA)
Cathode Band
Mounting Pad Layout
0.085 (2.159) MAX.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.086 (2.18) MIN.
0.180 (4.57)
0.160 (4.06)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.220 (5.59) REF.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
Revision: 21-Jul-17
Document Number: 88587
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
