ES2D

DATA SHEET www.onsemi.com Fast Rectifiers ES2A-ES2D SMB CASE 403AF Features • • • • • • • For Surface Mount Applications Glass−Passivated Junction Low−Profile Package Easy Pick and Place Built−in Strain Relief Superfast Recovery Times for High Efficiency These are Pb−Free Devices MARKING DIAGRAM ZYWW ES2x (COLOR BAND DENOTES CATHODE) ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Symbol Parameter Value Unit VRRM Maximum Repetitive Reverse Voltage ES2A ES2B ES2C ES2D IF(AV) Average Rectified Forward Current, 0.375″ Lead Length at TL = 115°C 2.0 IFSM Non−Repetitive Peak Forward Surge Current, 8.3 ms Single Half−Sine Wave 50 A TSTG Storage Temperature Range −55 to +150 °C Operating Junction Temperature Range −55 to +150 °C TJ V 50 100 150 200 Z Y WW ES2x = Assembly Plant Code = Year = Work Week = Specific Device Code x = A, B, C, D ORDERING INFORMATION A See detailed ordering and shipping information on page 3 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol PD Parameter Value Power Dissipation Unit 1.66 W RθJA Thermal Resistance, Junction to Ambient (Note 1) 75 °C/W RθJL Thermal Resistance, Junction to Lead (Note 1) 20 °C/W 1. Device mounted on FR−4 PCB 0.013 mm. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Value Parameter Symbol Test Conditions VF Maximum Forward Voltage IF = 2.0 A trr Reverse Recovery Time IR CT ES2A ES2B ES2C ES2D Unit 0.90 V IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A 20 ns Maximum Reverse Current at Rated VR TA = 25_C TA = 100_C 10 350 mA Total Capacitance VR = 4.0 V, f = 1.0 MHz 18 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. © Semiconductor Components Industries, LLC, 2001 April, 2022 − Rev. 2 1 Publication Order Number: ES2D/D ES2A−ES2D 50 2.0 10 1.5 1.0 Single Pulse Half Wave 60 Hz Resistive or Inductive Load 0.375″ (9.0 mm) Lead Lengths 0.5 0 IFSM, Peak Forward Surge Current (A) IF, Forward Current (A) 2.5 0 20 60 40 100 80 120 140 1 0.1 0.8 1.0 1.2 1.4 1.6 VF, Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 2. Foward Voltage Characteristics 1.8 1000 50 40 30 20 10 1 10 100 10 TA = 75°C TA = 25°C 1 0.1 0 20 40 60 80 100 120 140 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Non−Repetitive Surge Current Figure 4. Reverse Current vs. Reverse Voltage 50 40 30 20 10 0 0.1 TA = 100°C 100 60 CT, Total Capacitance (pF) 0.6 Lead Temperature (5C) 60 0 TA = 25°C Pulse Width = 300 ms 2% Duty Cycle 0.01 0.4 160 IR, Reverse Current (mA) IF, Average Rectified Forward Current (A) TYPICAL PERFORMANCE CHARACTERISTICS 1 10 100 500 VR, Reverse Voltage (V) Figure 5. Total Capacitance www.onsemi.com 2 ES2A−ES2D 50 W noninductive 50 W noninductive trr +0.5 A (−) DUT Pulse Generator (Note 3) 50 V (approx) 50 W noninductive Oscilloscope (Note 2) 0 −0.25 A (+) −1.0 A NOTES: 2. Rise time = 7.0 ns max; Input impedance = 1.0 MW 22 pF. 3. Rise time = 10 ns max; Source impedance = 50 W. Set Time Base for 5/10 ns/cm 1.0 cm Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram ORDERING INFORMATION Part Number Device Code Marking Package Type Shipping† ES2A ES2A SMB (Pb−Free) 3000 / Tape & Reel ES2B ES2B SMB (Pb−Free) 3000 / Tape & Reel ES2C ES2C SMB (Pb−Free) 3000 / Tape & Reel ES2D ES2D SMB (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMB CASE 403AF ISSUE O B 5.60 5.08 B M 0.13 DATE 31 AUG 2016 CBA 2.50 3.95 3.30 2.20 1.91 B B A 2.20 4.70 4.75 4.05 LAND PATTERN RECOMMENDATION 8° 0° 2.65 MAX A R0.15 4X 2.45 1.90 GAUGE PLANE 0.45 B C 0.30 0.05 0.203 0.050 2.15 1.65 0.13 M CBA 0.41 0.15 0 − 8° 1.60 0.75 DETAIL A SCALE 20 : 1 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5−1994. F. LAND PATTERN STD. DIOM5336X240M. DOCUMENT NUMBER: DESCRIPTION: 98AON13441G SMB Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative