ES2DHE3_A/I

ES2A, ES2B, ES2C, ES2D www.vishay.com Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated pellet chip junction • Ideal for automated placement • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses Available • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 SMB (DO-214AA) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive, and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 50 V, 100 V, 150 V, 200 V IFSM 50 A trr 20 ns VF 0.90 V TJ max. 150 °C Package SMB (DO-214AA) Diode variations Single MECHANICAL DATA Case: SMB (DO-214AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHME3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, .....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code ES2A ES2B ES2C ES2D EA EB EC ED UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TL = 110 °C IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG -55 to +150 °C Operating junction and storage temperature range Revision: 21-Jul-17 Document Number: 88587 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES2A, ES2B, ES2C, ES2D www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage SYMBOL VF (1) 2.0 A TA = 25 °C Maximum DC reverse current at rated DC blocking voltage IR TA = 100 °C Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A Maximum reverse recovery time IF = 2.0 A, VR = 30 V, dI/dt = 50 A/μs, Ir = 10 % IRM Maximum stored charge IF = 2.0 A, VR = 30 V, dI/dt = 50 A/μs, Ir = 10 % IRM Typical junction capacitance 4.0 V, 1 MHz trr TJ = 25 °C trr TJ = 100 °C TJ = 25 °C Qrr TJ = 100 °C ES2A ES2B ES2C ES2D 0.90 10 350 20 30 50 10 25 UNIT V μA ns ns nC CJ 18 pF SYMBOL ES2A ES2B ES2C ES2D UNIT RθJA (1) 75 RθJL (1) 20 Note (1) Pulse test: 300 ms pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance °C/W Note (1) Units mounted on PCB 5.0 mm x 5.0 mm (0.013 mm thick) land areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.096 52T 750 7" diameter plastic tape and reel ES2D-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel ES2DHE3_A/H (1) 0.096 H 750 7" diameter plastic tape and reel ES2DHE3_A/I (1) 0.096 I 3200 13" diameter plastic tape and reel ES2D-M3/52T 0.096 52T 750 7" diameter plastic tape and reel ES2D-M3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel ES2DHM3_A/H (1) 0.096 H 750 7" diameter plastic tape and reel ES2DHM3_A/I (1) 0.096 I 3200 13" diameter plastic tape and reel ES2D-E3/52T Note (1) AEC-Q101 qualified Revision: 21-Jul-17 Document Number: 88587 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES2A, ES2B, ES2C, ES2D www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 000 Instantaneous Reverse Leakage Current (µA) Average Forward Rectified Current (A) 3.0 2.0 1.0 Resistive or Inductive Load P.C.B. Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas TJ = 125 °C TJ = 100 °C 100 10 TJ = 25 °C 1 0.1 0 80 90 100 110 120 130 140 0 150 20 40 60 80 Lead Temperature (°C) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics 60 8.3 ms Single Half Sine-Wave at TL = 110 °C Junction Capacitance (pF) 50 40 30 20 10 0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 50 40 30 20 10 0 1 10 100 0.1 1 10 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 100 Percent of Rated Peak Reverse Voltage (%) 60 Peak Forward Surge Current (A) TJ = 150 °C 1000 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 100 Junction to Ambient 10 1 Mounted on 5.0 mm x 5.0 mm copper pad 0.1 0.001 0.1 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Transient Thermal Impedance 1000 Revision: 21-Jul-17 Document Number: 88587 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES2A, ES2B, ES2C, ES2D www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMB (DO-214AA) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 21-Jul-17 Document Number: 88587 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000