F17723154000

F1772-4000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) FEATURES Dimensions in mm • Compliant to RoHS directive 2002/95/EC L CAPACITANCE TOLERANCE W Pb-free Standard: ± 10 % H e3 DISSIPATION FACTOR TAN δ < 1 % measured at 1 kHz RoHS INSULATION RESISTANCE ± 0.4 pcm ± 0.4 X Ø 0.8 COMPLIANT FOR C ≤ 0.33 µF: 30 GΩ average value 15 GΩ minimum value TIME CONSTANT LEAD LENGTH X (mm) ORDERING CODE*** 4-1 6-1 15-1 30+5 F1772-. . .-4004 F1772-. . .-4000 F1772-. . .-4015 F1772-. . .-4030 Electrode Free margin Dielectric Center margin FOR C > 0.33 µF: 10 000 s average value 5000 s minimum value TEST VOLTAGE (Electrode/electrode): DC 2150 V/2 s REFERENCE STANDARDS EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 DIELECTRIC Polyester film MAXIMUM PULSE RISE TIME (dU/dt) in V/µs RATED VOLTAGE AC 440 V ELECTRODES Metal evaporated CONSTRUCTION PITCH (mm) 15.0 22.5 27.5 37.5 200 150 100 100 RATED VOLTAGE Metallized film capacitor Internal series connection Between interconnected terminations and case (foil method): AC 2500 V for 2 s at 25 °C. AC 440 V, 50 Hz/60 Hz Z (Ω) PERMISSIBLE DC VOLTAGE DC 1000 V 101 40/100/56 CAPACITANCE RANGE E12 series 0.01 µF X2 - 1.0 µF X2 preferred values acc. to E6 FURTHER TECHNICAL DATA See page 21 (Document No. 26504) Document Number: 26506 Revision: 16-Jun-10 10-3 0.01 0.05 0.1 0.5 1.0 0.015 µF 0.01 µF 0.047 µF 0.068 µF 0.033 µF 0.22 µF 0.47 µF 10-2 0.15 µF CLIMATIC TESTING CLASS ACC.TO EN 60068-1 10-1 0.33 µF Plastic case, epoxy resin sealed, flame retardant UL 94 V-0 2.2 µF 1.5 µF 1 µF 0.68 µF COATING 0.1 µF Radial tinned wire 0.022 µF 100 TERMINALS 5.0 10 f 50 100 (MHz) Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. For technical questions, contact: RFI@vishay.com www.vishay.com 25 F1772-4000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 µF X - 1.0 µF X 0.01 µF X - 1.0 µF X E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 µF X - 1.0 µF X 0.01 µF X - 0.82 µF X LR 64546 LR 64546-8 0.01 µF X2 - 1.0 µF X2 DE 1-8221 0.01 µF X2 - 1.0 µF X2 40005095 CB TEST-CERTIFICATE (for AC 440 V) EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 Germany APPROVAL MARK 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia CAPACITANCE TOL. (%) PITCH (mm) BOX NO. DIMENSIONS WxHxL (+ 0.2/- 0.4 mm) 0.01 µF X2 0.012 µF X2 0.015 µF X2 0.018 µF X2 0.022 µF X2 0.027 µF X2 0.033 µF X2 0.039 µF X2 0.047 µF X2 0.056 µF X2 0.068 µF X2 0.082 µF X2 0.1 µF X2 0.12 µF X2 0.15 µF X2 0.18 µF X2 0.22 µF X2 0.27 µF X2 0.33 µF X2 0.39 µF X2 0.47 µF X2 0.56 µF X2 0.68 µF X2 0.82 µF X2 1.0 µF X2 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 (1) 22.5 (1) 22.5 (1) 22.5 (1) 22.5 (1) 22.5 (1) 22.5 (1) 27.5 (1) 27.5 (1) 27.5 (1) 27.5 (1) 27.5 (1) 37.5 (1) 37.5 (1) 37.5 (1) 37.5 (1) 37.5 (1) 37.5 (1) 06 06 07 07 08 08 28 09 11 12 12 12 13 13 14 14 15 15 18 14 16 19 19 20 42 6.3 x 12.3 x 17.8 6.3 x 12.3 x 17.8 7.3 x 13.3 x 17.8 7.3 x 13.3 x 17.8 8.3 x 14.3 x 17.8 8.3 x 14.3 x 17.8 8.3 x 17.3 x 17.8 6.3 x 14.3 x 26.3 7.3 x 15.3 x 26.3 8.3 x 16.3 x 26.3 8.3 x 16.3 x 26.3 8.3 x 16.3 x 26.3 10.3 x 18.3 x 26.3 10.3 x 18.3 x 26.3 11.0 x 21.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.3 x 31.3 13.0 x 23.3 x 31.3 14.5 x 24.3 x 31.3 12.0 x 22.3 x 41.3 14.0 x 24.3 x 41.3 15.5 x 28.3 x 41.3 15.5 x 28.3 x 41.3 17.9 x 32.4 x 41.3 19.8 x 39.9 x 42.3 QUANTITY WEIGHT PACKAGE LEAD LENGTH LEAD LENGTH 6-1 mm 6-1 mm (g) (pcs) (2) 2.0 500 2.0 500 2.4 450 2.4 450 2.7 325 2.7 325 2.7 300 3.3 260 4.1 235 4.6 200 4.6 200 4.6 200 6.7 170 6.7 170 9.1 125 9.1 125 12.9 110 12.9 110 15.0 100 15.2 90 18.9 80 24.0 70 24.0 70 31.6 60 44.2 55 ORDERING CODE (3) F1772-310-4 . . . F1772-312-4 . . . F1772-315-4 . . . F1772-318-4 . . . F1772-322-4 . . . F1772-327-4 . . . F1772-333-4 . . . F1772-339-4 . . . F1772-347-4 . . . F1772-356-4 . . . F1772-368-4 . . . F1772-382-4 . . . F1772-410-4 . . . F1772-412-4 . . . F1772-415-4 . . . F1772-418-4 . . . F1772-422-4 . . . F1772-427-4 . . . F1772-433-4 . . . F1772-439-4 . . . F1772-447-4 . . . F1772-456-4 . . . F1772-468-4 . . . F1772-482-4 . . . F1772-510-4 . . . Preferred values in bold print. Notes • (1) (2) (3) Inbuilt discharging resistor on request (with larger case dimensions). Different pitch on request. Further information about packaging quantities with different lead length and/or taped versions. See page 16 (Document No. 27608 Packaging Quantities). Use Box No. as reference These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622). The ordering code is F1772-. . .-4900 at H = 16.5 mm, F1772-. . .-4901 at H = 18.5 mm. www.vishay.com 26 For technical questions, contact: RFI@vishay.com Document Number: 26506 Revision: 16-Jun-10 F1772-4000 AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) Vishay Roederstein APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 440 VAC. • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 620 VDC and divided by the applied voltage. Document Number: 26506 Revision: 16-Jun-10 For technical questions, contact: RFI@vishay.com www.vishay.com 27 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000