F17724682290

F1772 X2 www.vishay.com Vishay Roederstein Interference Suppression Film Capacitor - Class X2 Radial MKT 310 VAC - High Stability Grade FEATURES • • • • 15 mm to 37.5 mm lead pitch Internal series construction AEC-Q200 qualified for C ≤ 470 nF Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS High stability grade for continuous across the line X2 applications. See also application note: www.vishay.com/doc?28153 QUICK REFERENCE DATA 0.01 μF to 2.2 μF (preferred values acc. to E6) ± 10 %, ± 20 % (± 5 % on request) 310 VAC; 50 Hz to 60 Hz 800 VDC at 85 °C 630 VDC at 110 °C 40/110/56/C 110 °C IEC 60384-14 ed-4 and EN 60384-14 IEC 60065 pass. flamm. class C CSA-E384-14 UL 60384-14 Polyester film Metallized Series construction Capacitance range (E12 series) Capacitance tolerance Rated AC voltage Permissible DC voltage Climatic testing class according to IEC 60068-1 Maximum application temperature Reference standards Dielectric Electrodes Construction Encapsulation Leads Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Tinned wire Marking C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location, year and week; manufacturer’s logo or name; safety approvals Note • For more detailed data and test requirements, contact rfi@vishay.com DIMENSIONS in millimeters l w h lt Pitch P ± 0.4 Revision: 02-Jun-2021 Ø dt Document Number: 28161 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) F 0.1 2 1 3 10 4 100 5 Example: 468 = 680 nF 1772 X XX XXXX TYPE PACKAGING (Taped on reel) (1) PACKAGING (Loose) Tolerance ± 10 % ± 20 % Lead length (mm) Standard pitch size and dimension 2004 2000 2015 2030 2204 2200 2215 2230 4-1 6-1 15 - 1 30 + 5 Reduced pitch size and dimension (2) 2164 2160 2165 2163 2264 2260 2265 2263 4-1 6-1 15 - 1 30 + 5 Example: Tolerance ± 10 % ± 20 % Taping height (mm) Standard pitch size and dimension 2900 2901 2290 2291 16.5 18.5 Reduced pitch size and dimension (2) 2970 2971 2960 2961 16.5 18.5 F17724152215 means 0.15 µF, ± 20 %; standard pitch 22.5 mm; lead length 15 mm - 1 mm; F17724152265 means 0.15 µF, ± 20 %; reduced pitch 15.0 mm; lead length 15 mm - 1 mm Notes • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) Taped on reel pitch ≥ 27.5 mm is not available (2) Same capacitance values ≥ 0.15 μF are available in two different pitch sizes and dimensions SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URAC) 310 V Permissible DC voltage (URDC) 630 V Tangent of loss angle Rated voltage pulse slope at (dU/dt)R 435 VDC R between leads, for C ≤ 0.33 μF at 100 V; 1 min RC between leads, C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min ≤ 100 x 10-4 at 1 kHz 100 V/μs > 15 000 MΩ > 5000 s > 30 000 MΩ Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s C ≤ 0.47 μF 2200 V; for 1 min C > 0.47 μF 2150 V; for 1 min Withstanding (AC) voltage between leads and case Maximum application temperature 2120 V; 1 min 110 °C Note • See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 Revision: 02-Jun-2021 Document Number: 28161 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) SPQ (pieces) SHORT LEAD ORDERING CODE BULK LEAD LENGTH 6 mm - 1 mm (1)(2) 1.4 750 F17723102000 1.4 750 F17723122000 5.0 x 11.0 x 17.5 1.4 750 F17723152000 5.0 x 11.0 x 17.5 1.4 750 F17723182000 15 5.0 x 11.0 x 17.5 1.4 750 F17723222000 0.027 15 5.0 x 11.0 x 17.5 1.4 750 F17723272000 0.033 15 5.0 x 11.0 x 17.5 1.4 750 F17723332000 0.039 15 6.0 x 12.0 x 17.5 2.0 500 F17723392000 0.047 15 6.0 x 12.0 x 17.5 2.0 500 F17723472000 0.056 15 6.0 x 12.0 x 17.5 2.0 500 F17723562000 0.068 15 7.0 x 13.5 x 17.5 2.4 450 F17723682000 0.082 15 8.5 x 15.0 x 17.5 2.7 300 F17723822000 0.10 15 8.5 x 15.0 x 17.5 2.7 325 F17724102000 0.12 15 8.5 x 15.0 x 17.5 2.7 300 F17724122000 0.15 15 8.5 x 15.0 x 17.5 2.7 300 F17724152160 0.15 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724152000 0.18 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724182000 0.22 15 10.0 x 16.5 x 17.5 3.0 235 F17724222160 0.22 22.5 8.5 x 16.5 x 26.5 4.6 200 F17724222000 0.27 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724272000 DIMENSIONS (4) wxhxl MAX. (mm) CAP. (μF) PITCH (mm) 0.010 15 5.0 x 11.0 x 17.5 0.012 15 5.0 x 11.0 x 17.5 0.015 15 0.018 15 0.022 MASS (3) (g) dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 310 0.33 15 13.5 x 22.5 x 18.0 5.5 185 F17724332160 0.33 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724332000 0.39 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724392000 0.47 22.5 12.0 x 22.0 x 26.0 13.0 110 F17724472160 0.47 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724472000 0.56 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724562000 0.68 22.5 15.5 x 26.5 x 26.5 13.5 110 F17724682160 0.68 27.5 13.0 x 23.0 x 31.0 12.9 110 F17724682000 0.82 27.5 13.0 x 23.0 x 31.0 12.9 110 F17724822000 1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 F17725102160 1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 F17725102000 1.2 37.5 14.5 x 24.5 x 41.5 18.9 80 F17725122000 1.5 27.5 18.0 x 28.0 x 31.0 19.0 85 F17725152160 1.5 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725152000 1.8 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725182000 2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 F17725222160 2.2 37.5 18.0 x 32.5 x 41.5 31.6 60 F17725222000 dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 0.010 15 5.0 x 11.0 x 17.5 1.4 750 F17723102200 0.015 15 5.0 x 11.0 x 17.5 1.4 750 F17723152200 0.022 15 5.0 x 11.0 x 17.5 1.4 750 F17723222200 0.033 15 5.0 x 11.0 x 17.5 1.4 750 F17723332200 0.047 15 5.0 x 11.0 x 17.5 1.4 750 F17723472200 0.068 15 6.0 x 12.0 x 17.5 2.0 600 F17723682200 0.10 15 6.0 x 12.0 x 17.5 2.0 600 F17724102200 Revision: 02-Jun-2021 Document Number: 28161 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) SPQ (pieces) SHORT LEAD ORDERING CODE BULK LEAD LENGTH 6 mm - 1 mm (1)(2) 2.7 325 F17724152260 3.3 260 F17724152200 10.0 x 16.5 x 17.5 4.5 300 F17724222260 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724222200 0.33 15 13.5 x 22.5 x 18.0 5.5 185 F17724332260 0.33 22.5 8.5 x 18.0 x 26.0 5.3 190 F17724332200 0.47 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724472260 0.47 27.5 9.0 x 19.0 x 31.5 6.8 160 F17724472200 0.68 22.5 12.0 x 22.0 x 26.0 13.4 110 F17724682260 0.68 27.5 11.0 x 21.0 x 31.0 12.9 125 F17724682200 1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 F17725102260 1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 F17725102200 1.5 27.5 18.0 x 28.0 x 31.5 19.0 85 F17725152260 1.5 37.5 14.5 x 24.5 x 41.5 18.9 80 F17725152200 2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 F17725222260 2.2 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725222200 DIMENSIONS (4) wxhxl MAX. (mm) CAP. (μF) PITCH (mm) 0.15 15 8.5 x 15.0 x 17.5 0.15 22.5 6.0 x 15.5 x 26.0 0.22 15 0.22 MASS (3) (g) dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 310 Notes • SPQ = Standard Packing Quantity • For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 (1) For further packaging see table “Composition of Catalog Number” (2) Further information about packaging quantities with different lead length and / or taped versions, see document “Packing Quantities” www.vishay.com/doc?27608 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” APPROVALS SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINK 310 VAC 0.01 μF to 2.2 μF X2 40005079 www.vishay.com/doc?28196 UL 60384-14 310 VAC 0.01 μF to 2.2 μF X2 E354331 CSA-E 384-14 310 VAC 0.01 μF to 2.2 μF X2 E354331 CB test-certificate 310 VAC 0.01 μF to 2.2 μF X2 DE1-58410 EN 60384-14 (ENEC) (= IEC 60384-14 ed-4) www.vishay.com/doc?28191 www.vishay.com/doc?28226 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom. Revision: 02-Jun-2021 Document Number: 28161 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139. Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped SPACE REQUIREMENTS FOR PRINTED-CIRCUIT BOARD APPLICATIONS AND DIMENSION TOLERANCES For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) and height (hmax.) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below. • For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm, and Δh = 0.1 mm • For products with 15 mm 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -40 °C θB = +110 °C 5 cycles Duration t = 30 min Rapid change of temperature 4.6.1 Inspection Visual examination 4.7 Mounting: see section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Vibration 4.7.2 Final inspection Visual examination 4.9 Mounting: See section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Shock 4.9.2 Final measurements Revision: 02-Jun-2021 PERFORMANCE REQUIREMENTS No visible damage Legible marking No visible damage No visible damage Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initally Tangent of loss angle Increase of tan δ ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Specific Reference” of this specification Document Number: 28161 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence Capacitance 4.11.1 Initial measurements Measured in 4.4.2 and 4.9.2 Tangent of loss angle Measured initally in C1A and C1B 4.11.2 Dry heat Temperature: 110 °C Duration: 16 h 4.11.3 Damp heat cyclic Test Db, first cycle 4.11.4 Cold Temperature: -40 °C Duration: 2 h 4.11.5 Damp heat cyclic Test Db, remaining cycles 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1 Tangent of loss angle Increase of tan δ ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.11.1 Voltage proof 1350 VDC 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH No load 4.12.1 Initial measurements Capacitance Tangent of loss angle: 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1 Tangent of loss angle Increase of tan δ ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.12.1 Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 02-Jun-2021 Document Number: 28161 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kV for C ≤ 1 μF X2: 2.5 kV/√C for C > 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 110 °C Once in every hour the voltage is increased to 1000 V (RMS) for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements No self healing breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan δ ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.13.1 Voltage proof 1350 VDC; 1 min between terminations 2120 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 435 VDC Discharge resistance: 435 V DC R = -----------------------------------------1.5 x C ( dU ⁄ dt ) 4.15.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.13.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1 Tangent of loss angle Increase of tan δ ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.15.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 02-Jun-2021 Document Number: 28161 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1772 X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification. Bore of gas jet: Ø 0.5 mm After removing test flame from capacitor, the capacitor must not continue to burn for more than 30 s. No burning particle must drop from the sample. SUB-GROUP C6 4.17 Passive flammability Class C Fuel: butane Test duration for actual volume V in mm3: V ≤ 250: 5 s 250 < V ≤ 500: 10 s 500 < V ≤ 1750: 20 s V > 1750: 30 s One flame application 12 mm ~ 8 mm 45.0° SUB-GROUP C7 4.18 Active flammability Revision: 02-Jun-2021 20 cycles of 2.5 kV discharges on the test capacitor connected to URAC. The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28161 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000