F1778447M2ICT0

F1778X2 www.vishay.com Vishay Roederstein Interference Suppression Film Capacitor - Class X2 Radial MKP 310 VAC - Standard Across the Line FEATURES • • • • Compliant with IEC 60381-14: AMD1 THB grade IA Self-healing properties For temperature up to 110 °C Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS For standard across the line X2 applications. See also application note: www.vishay.com/doc?28153 QUICK REFERENCE DATA 0.001 μF to 4.7 μF (preferred values acc. to E6) ± 20 %; ± 10 %; (± 5 % on request) 310 VAC; 50 Hz to 60 Hz 800 VDC at 85 °C 630 VDC at 110 °C 55 / 110 / 56 / B for volumes > 1750 mm3 55 / 110 / 56 / C for volumes ≤ 1750 mm3 C ≤ 470 nF: 110 °C (125 °C for less than 1000 h) C > 470 nF: 110 °C IEC 60384-14:2013 IEC 60384-14:2013 / AMD1:2016 EN 60384-14:2013 + AMD1:2016 IEC 60065, pass. flamm. class B for volumes > 1750 mm3 CSA-E384-14; CQC UL 60384-14 Polypropylene film Metallized film Mono construction Capacitance range (E12 series) Capacitance tolerance Rated AC voltage Permissible DC voltage Climatic testing class according to IEC 60068-1 Maximum application temperature Reference standards Dielectric Electrodes Construction Encapsulation Leads Plastic case, epoxy resin sealed, flame retardant class UL 94 V-0 Tinned wire C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location, year and week; manufacturer’s logo or name; safety approvals Marking Notes • For more detailed data and test requirements, contact rfi@vishay.com DIMENSIONS in millimeters w l h lt P Revision: 17-Jan-2024 Ø dt Document Number: 27610 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER The new RFI Film Capacitor Code is made up 14 digit code (example) CAPACITANCE SERIES CAPACITANCE TOLERANCE MULTIPLIER AND CAPACITANCE (NUMERICALLY) 1 2 3 4 5 F1 7 7 8 1 2 3 4 5 6 7 8 9 F1 7 7 8 4 1 0 PITCH DESIGN LEAD CONFIGURATION POSITION 12, 13, 14 VOLTAGES 6 78 4 1 0 9 M 10 2 11 F 12 C 11 12 13 14 (POS.) M 2 F C B 0 Pitch Capacitance Series Capacitance Value expressed in pF Capacitance Tolerance Pos. 1 to 5 Pos. 6/7/8 Pos. 9 Pos. 10 Pos. 11 Pos. 12 represent significant figures e.g. 0 (zero) = spaceholder e.g. 0 (zero) = spaceholder M = ± 20 % K = ± 10 % J=±5% 2 = 310 VAC 3 = 310 VAC e.g. 0 (zero) = spaceholder C = 7.5 mm D = 10.0 mm F = 15.0 mm I = 22.5 mm K = 27.5 mm e.g. 0 (zero) = spaceholder S = 3.5 - 0.5 mm P = 3.5 ± 0.3 mm B = 4 - 1 mm M = 5 - 1 mm C = 6 - 1 mm E = 10 - 1 mm T = 11 - 1 mm D = 15 - 1 mm F = 19 - 1 mm H = 20 + 5 mm L = 30 + 5 mm K = 40 + 5 mm N = 45 - 2 mm other = special version e.g.: 0.01 µF = 310 0.1 µF = 410 1.0 µF = 510 14 0 10 Rated Voltage or special versions Pos. 6 specifies multiplier (in 10) 13 B Specials: A = + 10 %/- 0 % B = + 5 %/+ 15 % P = + 0 %/- 15 % R = + 10 %/- 5 % U = + 10 %/+ 20 % Design (lead configuration) Pos. 12/13/14 Pos. 13 Pos. 14 Packaging of specialities Special internal 0 (zero) = spaceholder code B = bulk/loose 0 (zero) = T = tray/pallet (2) spaceholder U = tape and reel (1) other = special (H: 16.5 mm, Ø 350 mm) version R = tape and reel (1) (H: 16.5 mm, Ø 500 mm) V = tape and reel (1) (H: 18.5 mm, Ø 350 mm) W = tape and reel (1) (H: 18.5 mm, Ø 500 mm) G = Ammopack (1) (H: 18.5 mm) Z = leaded wound element (unencapsulated) other = special version Notes (1) For detailed tape specification refer to packaging information: www.vishay.com/doc?28139 (2) Packaging will be bulk for all capacitors with pitch ≤ 15 mm and such with long leads (> 5 mm). Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T”. Revision: 17-Jan-2024 Document Number: 27610 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) Permissible DC voltage (URDC) Tangent of loss angle: C < 470 nF 470 nF ≤ C ≤ 1 μF C > 1 μF Rated voltage pulse slope (dU/dt)R at 435 VDC Pitch = 7.5 mm Pitch = 10 mm Pitch = 15 mm Pitch = 22.5 mm Pitch = 27.5 mm R between leads, for C ≤ 0.33 μF at 100 V; 1 min RC between leads, for C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 ≤ V/s: C ≤ 1 μF C > 1 μF Withstanding (AC) voltage between leads and case Max. application temperature for 0.001 μF ≤ C ≤ 0.47 μF Max. application temperature for C > 0.47 μF VALUE 310 V 630 V at 1 kHz ≤ 10 x 10-4 ≤ 20 x 10-4 ≤ 30 x 10-4 at 10 kHz ≤ 20 x 10-4 ≤ 70 x 10-4 600 V/μs 600 V/μs 400 V/μs 150 V/μs 100 V/μs > 15 000 MΩ > 5000 s > 30 000 MΩ 2200 V; 1 min 1800 V; 1 min 2120 V; 1 min 110 °C (125 °C less than 1000 h) 110 °C Note (1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE URAC (V) 310 CAP. μF POS. 6 TO 8 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.033 0.039 0.047 0.047 0.056 0.068 Revision: 17-Jan-2024 TOLERANCE CODE POS. 9 J=±5% K = ± 10 % M = ± 20 % K/M K K/M K K/M K K/M K K/M K K/M K K/M K K/M K K/M K K M K K M K M ORDERING CODE (2) DIMENSIONS MAX. wxhxl (mm) SPQ (4) MASS SHORT (g) (3) LEADS (PIECES) TYPE C-VALUE TOL. VOLTAGE PITCH 1 TO 5 6 TO 8 PITCH 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 4.0 x 9.0 x 10.0 0.45 1500 F1778 210 4.0 x 9.0 x 10.0 0.45 1500 F1778 212 4.0 x 9.0 x 10.0 0.45 1500 F1778 215 4.0 x 9.0 x 10.0 0.45 1500 F1778 218 4.0 x 9.0 x 10.0 0.45 1500 F1778 222 4.0 x 9.0 x 10.0 0.45 1500 F1778 227 4.0 x 9.0 x 10.0 0.45 1500 F1778 233 4.0 x 9.0 x 10.0 0.45 1500 F1778 239 4.0 x 9.0 x 10.0 0.45 1500 F1778 247 4.0 x 9.0 x 10.0 0.45 1500 F1778 256 4.0 x 9.0 x 10.0 0.45 1500 F1778 268 4.0 x 9.0 x 10.0 0.45 1500 F1778 282 4.0 x 9.0 x 10.0 0.45 1500 F1778 310 4.0 x 9.0 x 10.0 0.45 1500 F1778 312 4.0 x 9.0 x 10.0 0.45 1500 F1778 315 4.0 x 9.0 x 10.0 0.45 1500 F1778 318 4.0 x 9.0 x 10.0 0.45 1500 F1778 322 4.0 x 9.0 x 10.0 0.45 1500 F1778 327 5.0 x 10.5 x 10.0 0.6 1000 F1778 333 4.0 x 9.0 x 10.0 0.45 1500 F1778 333 5.0 x 10.5 x 10.0 0.6 1000 F1778 339 5.0 x 10.5 x 10.0 0.6 1000 F1778 347 5.0 x 10.5 x 10.0 0.4 1000 F1778 347 6.0 x 11.5 x 10.0 0.8 750 F1778 356 6.0 x 11.5 x 10.0 0.8 750 F1778 368 LEAD LENGTH DESIGN 9 10 11 12 TO 14 (1) . K . K . K . K . K . K . K . K . K K M K K M K M . . . . . . . . . . . . . . . . . . . . . . . . . C C C C C C C C C C C C C C C C C C C C C C C C C ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 Document Number: 27610 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE CAP. URAC μF (V) POS. 6 TO 8 310 TOLERANCE CODE POS. 9 J=±5% K = ± 10 % M = ± 20 % 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.068 0.082 0.100 K/M K K/M K K/M K K/M K K/M K K/M K K/M K K/M K K/M K K/M K K M K K/M K K/M 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.10 0.12 0.15 0.15 K/M K K/M K K/M K K/M K K/M K K/M K K M K K M 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 K K/M K K/M K K/M K/M M Revision: 17-Jan-2024 ORDERING CODE (2) DIMENSIONS MAX. wxhxl (mm) SPQ (4) MASS SHORT (g) (3) LEADS (PIECES) TYPE C-VALUE TOL. VOLTAGE PITCH 1 TO 5 6 TO 8 PITCH 10 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 4.0 x 10.0 x 12.5 0.6 1500 F1778 210 4.0 x 10.0 x 12.5 0.6 1500 F1778 212 4.0 x 10.0 x 12.5 0.6 1500 F1778 215 4.0 x 10.0 x 12.5 0.6 1500 F1778 218 4.0 x 10.0 x 12.5 0.6 1500 F1778 222 4.0 x 10.0 x 12.5 0.6 1500 F1778 227 4.0 x 10.0 x 12.5 0.6 1500 F1778 233 4.0 x 10.0 x 12.5 0.6 1500 F1778 239 4.0 x 10.0 x 12.5 0.6 1500 F1778 247 4.0 x 10.0 x 12.5 0.6 1500 F1778 256 4.0 x 10.0 x 12.5 0.6 1500 F1778 268 4.0 x 10.0 x 12.5 0.6 1500 F1778 282 4.0 x 10.0 x 12.5 0.6 1500 F1778 310 4.0 x 10.0 x 12.5 0.6 1500 F1778 312 4.0 x 10.0 x 12.5 0.6 1500 F1778 315 4.0 x 10.0 x 12.5 0.6 1250 F1778 318 4.0 x 10.0 x 12.5 0.6 1250 F1778 322 4.0 x 10.0 x 12.5 0.6 1250 F1778 327 4.0 x 10.0 x 12.5 0.6 1000 F1778 333 4.0 x 10.0 x 12.5 0.6 1000 F1778 339 4.0 x 10.0 x 12.5 0.6 750 F1778 347 4.0 x 10.0 x 12.5 0.6 1000 F1778 347 5.0 x 11.0 x 12.5 0.82 1000 F1778 356 5.0 x 11.0 x 12.5 0.82 750 F1778 368 6.0 x 12.0 x 12.5 1.10 750 F1778 382 6.0 x 12.0 x 12.5 1.10 750 F1778 410 PITCH 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 5.0 x 11.0 x 17.5 1.0 750 F1778 310 5.0 x 11.0 x 17.5 1.0 750 F1778 312 5.0 x 11.0 x 17.5 1.0 750 F1778 315 5.0 x 11.0 x 17.5 1.0 750 F1778 318 5.0 x 11.0 x 17.5 1.0 750 F1778 322 5.0 x 11.0 x 17.5 1.0 750 F1778 327 5.0 x 11.0 x 17.5 1.0 750 F1778 333 5.0 x 11.0 x 17.5 1.0 750 F1778 339 5.0 x 11.0 x 17.5 1.0 750 F1778 347 5.0 x 11.0 x 17.5 1.0 750 F1778 356 5.0 x 11.0 x 17.5 1.0 750 F1778 368 5.0 x 11.0 x 17.5 1.0 750 F1778 382 5.0 x 11.0 x 17.5 1.0 600 F1778 410 5.0 x 11.0 x 17.5 1.0 750 F1778 410 6.0 x 12.0 x 17.5 1.4 600 F1778 412 6.0 x 12.0 x 17.5 1.4 450 F1778 415 6.0 x 12.0 x 17.5 1.4 600 F1778 415 PITCH 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 7.0 x 13.5 x 17.5 1.8 450 F1778 418 7.0 x 13.5 x 17.5 1.8 300 F1778 422 8.5 x 15.0 x 17.5 2.4 240 F1778 427 8.5 x 15.0 x 17.5 2.4 240 F1778 433 10.0 x 16.5 x 17.5 3 225 F1778 439 10.0 x 16.5 x 17.5 3 225 F1778 447 10.0 x 18.5 x 18.0 4.3 225 F1778 456 11.0 x 18.5 x 18.0 5.5 225 F1778 468 LEAD LENGTH DESIGN 9 10 11 12 TO 14 (1) . K . K . K . K . K . K . K . K . K . K K M K . K . . . . . . . . . . . . . . . . . . . . . . . . . . . D D D D D D D D D D D D D D D D D D D D D D D D D D ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 . K . K . K . K . K . K K M K K M . . . . . . . . . . . . . . . . . F F F F F F F F F F F F F F F F F ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 K . K . K . . M . . . . . . . . F F F F F F F F ..0 ..0 ..0 ..0 ..0 ..0 ..0 ..0 Document Number: 27610 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE CAP. URAC μF (V) POS. 6 TO 8 TOLERANCE CODE POS. 9 J=±5% K = ± 10 % M = ± 20 % ORDERING CODE (2) DIMENSIONS MAX. wxhxl (mm) SPQ (4) MASS SHORT (g) (3) LEADS (PIECES) TYPE 1 TO 5 C-VALUE TOL. VOLTAGE PITCH 6 TO 8 LEAD LENGTH DESIGN 9 10 11 12 TO 14 (1) PITCH 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 310 0.12 K 6.0 x 15.5 x 26.0 2.4 260 F1778 412 K . I ..0 0.15 K/M 6.0 x 15.5 x 26.0 2.4 260 F1778 415 . . I ..0 0.18 K 6.0 x 15.5 x 26.0 2.4 260 F1778 418 K . I ..0 0.22 K/M 6.0 x 15.5 x 26.0 2.4 260 F1778 422 . . I ..0 0.27 K 6.0 x 15.5 x 26.0 2.4 200 F1778 427 K . I ..0 ..0 0.33 K 6.0 x 15.5 x 26.0 2.4 190 F1778 433 K . I 0.33 M 6.0 x 15.5 x 26.0 2.4 235 F1778 433 M . I ..0 0.39 K 7.0 x 16.5 x 26.0 2.9 200 F1778 439 K . I ..0 0.47 K 7.0 x 16.5 x 26.0 2.9 190 F1778 447 K . I ..0 0.47 M 7.0 x 16.5 x 26.0 2.9 200 F1778 447 M . I ..0 0.56 K 8.5 x 18.0 x 26.0 3.8 150 F1778 456 K . I ..0 0.68 K 10.0 x 19.5 x 26.0 6.8 150 F1778 468 K . I ..0 0.68 M 8.5 x 18.0 x 26.0 3.8 170 F1778 468 M . I ..0 0.82 K 10.0 x 19.5 x 26.0 6.8 200 F1778 482 K . I ..0 1.0 K 12.0 x 22.0 x 26.0 7.8 150 F1778 510 K . I ..0 1.0 M 10.0 x 19.5 x 26.0 6.8 135 F1778 510 M . I ..0 1.5 M 12.5 x 22.5 x 26.5 10 140 F1778 515 M . I ..0 PITCH 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.47 K/M 9.0 x 19.0 x 31.5 5.5 160 F1778 447 . . K ..0 0.56 K 9.0 x 19.0 x 31.5 5.5 160 F1778 456 K . K ..0 0.68 K/M 9.0 x 19.0 x 31.5 5.5 160 F1778 468 . . K ..0 0.82 K 11.0 x 21.0 x 31.0 7.4 125 F1778 482 K . K ..0 1.0 K/M 11.0 x 21.0 x 31.0 7.4 125 F1778 510 . . K ..0 1.2 K 11.0 x 21.0 x 31.0 7.4 110 F1778 512 K . K ..0 1.5 K/M 13.0 x 23.0 x 31.0 9.2 110 F1778 515 . . K ..0 1.8 K 15.0 x 25.0 x 31.5 12.3 85 F1778 518 K . K ..0 2.2 K/M 15.0 x 25.0 x 31.5 12.3 85 F1778 522 . . K ..0 2.7 K 18.0 x 28.0 x 31.5 16.1 100 F1778 527 K . K ..0 3.3 K 21.0 x 31.0 x 31.0 20.3 70 F1778 533 K . K ..0 3.3 M 18.0 x 28.0 x 31.5 16.1 80 F1778 533 M . K ..0 3.9 K 21.0 x 31.0 x 31.0 20.3 50 F1778 539 K . K ..0 4.7 M 21.0 x 31.0 x 31.0 20.3 50 F1778 547 M . K ..0 Notes • SPQ = Standard Packing Quantity • For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 (1) For further packaging see table “Composition of Catalog Number” (2) Further information about packaging quantities with different lead length and / or taped versions, see document “Packing Quantities” www.vishay.com/doc?27608 (3) Weight for short lead product only Revision: 17-Jan-2024 Document Number: 27610 5 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein APPROVALS SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINKS EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 (2013)) 310 VAC 1 nF to 4.7 μF ENEC16/FI/21/01054/A2 www.vishay.com/doc?28179 UL 60384-14 310 VAC 1 nF to 4.7 μF E354331 CSA-E384-14 310 VAC 1 nF to 4.7 μF E354331 CQC 310 VAC 1 nF to 4.7 μF CB test certificate 310 VAC 1 nF to 4.7 μF www.vishay.com/doc?28184 CQC08001026060 (F) www.vishay.com/doc?27624 CQC08001026061 (L) www.vishay.com/doc?27625 FI-39827/A1 www.vishay.com/doc?28175 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom. MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Packaging Information: www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped in addition Space Requirements on Printed Circuit-Board The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings: • For products with pitch ≤ 15 mm, Δw x Δl = 0.3 mm and Δh = 0.1 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δw x Δl = 0.5 mm and Δh = 0.1 mm • For products with pitch = 37.5 mm, Δw x Δl = 0.7 mm and Δh = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + Δ Eccentricity Imax. = I + Δ CBA116 hmax. = h + Δ Seating plane Revision: 17-Jan-2024 Document Number: 27610 6 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guideline for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. CHARACTERISTICS 4 ΔC/C (%) 103 1n Impedance (Ω) typical 2 4.7 102 0 1 10 max. -2 100 -4 F nF 10 47 10 nF 0n F 47 0n 10 00 F nF 47 00 nF nF 10-1 min. -6 - 50 0 50 Tamb (°C) 100 10-2 104 Capacitance as a function of ambient temperature (typical curve) 105 106 107 f (Hz) 108 Impedance as a function of frequency (typical curve) 102 f (MHz) Dissipation factor (x 10-4) 103 101 102 F 1µ > 1 µF C ≤ C nF F < 220 n 0 C≤ 2 nF 2 < ≤ 47 nF 47 nF < C 10 nF 10 C≤ 101 100 101 102 103 104 f (Hz) Tangent of loss angle as a function of frequency (typical curve) Revision: 17-Jan-2024 105 X2 100 10-1 1 10 100 1000 C (nF) 10 000 Resonant frequency as a function of capacitance (typical curve) Document Number: 27610 7 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein 104 103 AC voltage (V) 4700 nF AC current (mA) 10 3 1000 nF 470 nF 102 100 nF 102 47 nF 101 10 nF 4.7 nF 100 1 nF Tamb ≤ 110 °C 101 101 102 103 104 f (Hz) 10-1 101 105 Max. RMS voltage as a function of frequency (typical curve) Tamb ≤ 110 °C 102 103 104 f (Hz) 105 Max. RMS current as a function of frequency (typical curve) RC (s) 106 105 104 0 20 40 60 80 100 Tamb (°C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum mains voltage of 310 VAC. • For series impedance applications we refer to application note www.vishay.com/doc?28153 • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C ≤ 470 nF and 110 °C for C > 470 nF. • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and divided by the applied voltage. Revision: 17-Jan-2024 Document Number: 27610 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC Publication IEC 60384-14 ed-4 (2013) and Specific Reference Data”. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) CONDITIONS PERFORMANCE REQUIREMENTS As specified in section “General Data” of this specification Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s No visible damage 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured initially. Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -55 °C θB = +110 °C 5 cycles Duration t = 30 min Rapid change of temperature 4.6.1 Inspection Visual examination 4.7 Mounting: see section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Vibration Revision: 17-Jan-2024 No visible damage Legible marking No visible damage Document Number: 27610 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.7.2 Final inspection CONDITIONS Visual examination PERFORMANCE REQUIREMENTS No visible damage 4.9 Shock Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 4.9.2 Final measurements Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured initially. Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 110 °C 4.11.3 Damp heat cyclic Test Db First cycle Duration: 16 h 4.11.4 Cold Temperature: -55 °C 4.11.5 Damp heat cyclic Test Db Remaining cycles Duration: 2 h 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.11.1. Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days; 40 °C; 90 % to 95 % RH no load 4.12.1 Initial measurements Capacitance Tangent of loss angle: at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Revision: 17-Jan-2024 Document Number: 27610 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C2 4.12.3 Final measurements SUB-GROUP C3 4.13.1 Initial measurements CONDITIONS Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.12.1. Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kV for C ≤ 1 μF X2: 2.5 kV/√C for C > 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 110 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements SUB-GROUP C4 4.15 Charge and discharge PERFORMANCE REQUIREMENTS No self healing, breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.13.1. Voltage proof 1350 VDC; 1 min between terminations 2120 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification 10 000 cycles Charged to 435 VDC Discharge resistance: 435 V DC R = ---------------------------------------------1.25 x C ( dU/dt ) 4.15.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.15.1. Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 17-Jan-2024 Document Number: 27610 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F1778X2 www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification. Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0° SUB-GROUP C7 4.18 Active flammability 20 cycles of 2.5 kV discharges on the test capacitor connected to URAC. The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. SUB-GROUP ADD1 A.1 Damp heat steady state with voltage RH: 40 %; temp.: 93 °C, voltage: 300 VAC Duration: 21 days A.1.1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz A.1.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % of the value with initial measurement A.1.1 Tangent of loss angle Increase of tan δ ≤ 0.024 Compared to values with initial measurement A.1.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 17-Jan-2024 Document Number: 27610 12 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Document Number: 91000 1 For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 01-Jan-2024