F339X121533MDA2B0

F339X1 330VAC www.vishay.com Vishay BCcomponents Interference Suppression Film Capacitor - Class X1 Radial MKP 330 VAC - Standard Across the Line FEATURES • 7.5 mm to 27.5 mm lead pitch • Small dimensions • High voltage capability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS For standard across the line X1 applications See also application note: www.vishay.com/doc?28153 QUICK REFERENCE DATA Capacitance range (E12 series) 0.001 μF to 2.2 μF (preferred values according to E6) Capacitance tolerance ± 20 %; ± 10 %; (± 5 % on request) Climatic testing class according to IEC 60068-1 55/110/56/B Rated AC voltage 330 VAC; 50 Hz to 60 Hz Permissible DC voltage 800 VDC at 85 °C Maximum application temperature 110 °C IEC 60384-14 ed-4 and EN 60384-14 IEC 60065 requires pass. flamm. class B CSA-E384-14; UL 60384-14 CQC GB/T6346.14-2015 Reference standards Dielectric Polypropylene film Electrodes Metallized Mono construction Construction Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Encapsulation Leads Tinned wire C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location, year and week; manufacturer's logo or name; safety approvals Marking Note • For more detailed data and test requirements, contact rfi@vishay.com DIMENSIONS in millimeters l w h lt P Ø dt Note • Ø dt ± 10 % of standard diameter specified Revision: 16-Jul-2020 Document Number: 28185 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) 0.1 2 CODE Example: P1 (mm) PITCH CODE 7.5 C 1 3 10 D 10 4 310 10 nF 0.01 μF 15 F 100 5 410 100 nF 0.1 μF 22.5 I 1000 6 510 1000 nF 1.0 μF 27.5 K 10 000 7 SPECIAL CODE FOR TERMINAL VOLTAGE 2 2 pins 33 = 330 VAC (#) Customized 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 F 3 3 9 X 1 4 1 0 3 M F M 2 B 0 3 TOLERANCE CLASS TYPE lt (mm) LEAD LENGTH CODE M ± 20 % K ± 10 % J ± 5% A Special tolerance PITCH (mm) SPECIAL 0 = Standard Other = Special PACKING CODE 3.5 + 1, - 0.5 A 7.5 and 10 B/T 3.5 ± 0.3 P ≥ 15 W 5±1 M All I All 25 ± 2 PACKING STYLE Bulk/loose (1) Tape and reel (H: 18.5 mm; 500 mm) REMARK Not for bent back Pitch ≤ 22.5 mm 0: Space holder Notes • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) Packaging will be bulk for all capacitors with pitch ≤ 15 mm and such with long leads (> 5 mm). Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T”. Revision: 16-Jul-2020 Document Number: 28185 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) Permissible DC voltage (URDC) Tangent of loss angle At 1 kHz C < 470 nF ≤ 10 x 10-4 470 nF ≤ C ≤ 2.2 μF ≤ 20 x 10-4 Rated voltage pulse slope (dU/dt)R at 465 VDC R between leads, for C ≤ 0.33 μF at 100 V; 1 min RC between leads, for C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s: C ≤ 2.2 μF C > 2.2 μF Withstanding (AC) voltage between leads and case Maximum application temperature Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 VALUE 330 V 800 V At 10 kHz ≤ 20 x 10-4 ≤ 70 x 10-4 100 V/μs > 15 000 MΩ > 5000 s > 30 000 MΩ 3400 V; 1 min 2200 V; 1 min 2160 V; 1 min 110 °C ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) CAP. (μF) 0.0010 0.0015 0.0022 0.0033 0.0047 330 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 DIMENSIONS wxhxl (mm) 4.0 x 9.0 x 10.0 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 4.0 x 10.0 x 12.5 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 Revision: 16-Jul-2020 MASS (g) (3) SHORT LEADS LONG LEADS TAPED REEL lt = 3.5 mm + 1 mm/- 0.5 mm Ø = 500 mm (1)(2) lt = 5.0 mm lt = 25.0 mm (≤ 10 mm) SPQ SPQ H = 18.5 mm; ± 1.0 mm ± 2.0 mm or 3.5 mm ± 0.3 mm P0 = 12.7 mm (≥ 15 mm) PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 20 % 21033MCA2B0 21033MCM2B0 21033MCI2B0 21033MC02W0 21533MCA2B0 21533MCM2B0 1500 21533MCI2B0 1000 21533MC02W0 0.4 22233MCA2B0 22233MCM2B0 22233MCI2B0 22233MC02W0 0.4 23333MCA2B0 23333MCM2B0 1000 23333MCI2B0 1250 23333MC02W0 24733MCA2B0 24733MCM2B0 750 24733MCI2B0 1000 24733MC02W0 0.8 PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 21033MDA2B0 21033MDM2B0 21033MDI2B0 21033MD02W0 21533MDA2B0 21533MDM2B0 21533MDI2B0 21533MD02W0 22233MDA2B0 22233MDM2B0 22233MDI2B0 22233MD02W0 23333MDA2B0 23333MDM2B0 23333MDI2B0 23333MD02W0 0.6 1000 1250 24733MDA2B0 24733MDM2B0 24733MDI2B0 24733MD02W0 26833MDA2B0 26833MDM2B0 26833MDI2B0 26833MD02W0 31033MDA2B0 31033MDM2B0 31033MDI2B0 31033MD02W0 31533MDA2B0 31533MDM2B0 31533MDI2B0 31533MD02W0 0.82 32233MDA2B0 32233MDM2B0 1000 32233MDI2B0 1000 32233MD02W0 1.1 33333MDA2B0 33333MDM2B0 750 33333MDI2B0 750 33333MD02W0 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 31033MFP2B0 31033MFM2B0 31033MFI2B0 31033MF02W0 31533MFP2B0 31533MFM2B0 31533MFI2B0 31533MF02W0 1.0 32233MFP2B0 32233MFM2B0 1250 32233MFI2B0 1000 32233MF02W0 33333MFP2B0 33333MFM2B0 33333MFI2B0 33333MF02W0 34733MFP2B0 34733MFM2B0 34733MFI2B0 34733MF02W0 36833MFP2B0 36833MFM2B0 1000 36833MFI2B0 1000 36833MF02W0 1.4 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 1.8 41033MFP2B0 41033MFM2B0 750 41033MFI2B0 500 41033MF02W0 41533MFP2B0 41533MFM2B0 750 41533MFI2B0 500 41533MF02W0 2.4 3.0 42233MFP2B0 42233MFM2B0 500 42233MFI2B0 450 42233MF02W0 SPQ 2500 2000 1900 1400 1100 900 1100 900 800 650 600 Document Number: 28185 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) CAP. (μF) 0.10 0.15 0.22 0.33 0.47 0.68 0.82 0.22 0.33 0.47 0.68 1.0 1.5 2.2 330 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 DIMENSIONS wxhxl (mm) 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 9.0 x 19.0 x 31.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 18.0 x 28.0 x 31.5 21.0 x 31.0 x 31.0 4.0 x 9.0 x 10.0 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 4.0 x 10.0 x 12.5 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 Revision: 16-Jul-2020 MASS (g) (3) SHORT LEADS lt = 3.5 mm + 1 mm/- 0.5 mm (≤ 10 mm) or 3.5 mm ± 0.3 mm (≥ 15 mm) lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm SPQ PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 41033MIP2T0 41033MIM2T0 41033MII2B0 2.4 300 250 41533MIP2T0 41533MIM2T0 41533MII2B0 42233MIP2T0 42233MIM2T0 200 42233MII2B0 250 2.9 3.8 43333MIP2T0 43333MIM2T0 200 43333MII2B0 250 6.8 44733MIP2T0 44733MIM2T0 200 44733MII2B0 200 46833MIP2T0 46833MIM2T0 150 46833MII2B0 200 7.8 7.8 48233MIP2T0 48233MIM2T0 140 48233MII2B0 400 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 42233MKP2T0 42233MKM2T0 42233MKI2B0 43333MKP2T0 43333MKM2T0 100 43333MKI2B0 150 5.5 44733MKP2T0 44733MKM2T0 44733MKI2B0 46833MKP2T0 46833MKM2T0 100 46833MKI2B0 125 7.4 9.2 51033MKP2T0 51033MKM2T0 100 51033MKI2B0 125 16.1 51533MKP2T0 51533MKM2T0 100 51533MKI2B0 100 52233MKP2T0 52233MKM2T0 50 52233MKI2B0 75 20.3 PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 % 21033KCA2B0 21033KCM2B0 21033KCI2B0 21233KCA2B0 21233KCM2B0 21233KCI2B0 21533KCA2B0 21533KCM2B0 21533KCI2B0 0.4 1500 1000 21833KCA2B0 21833KCM2B0 21833KCI2B0 22233KCA2B0 22233KCM2B0 22233KCI2B0 22733KCA2B0 22733KCM2B0 22733KCI2B0 23333KCA2B0 23333KCM2B0 23333KCI2B0 0.4 1000 1250 23933KCA2B0 23933KCM2B0 23933KCI2B0 24733KCA2B0 24733KCM2B0 24733KCI2B0 0.8 750 1000 25633KCA2B0 25633KCM2B0 25633KCI2B0 PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % 21033KDA2B0 21033KDM2B0 21033KDI2B0 21233KDA2B0 21233KDM2B0 21233KDI2B0 21533KDA2B0 21533KDM2B0 21533KDI2B0 21833KDA2B0 21833KDM2B0 21833KDI2B0 22233KDA2B0 22233KDM2B0 22233KDI2B0 22733KDA2B0 22733KDM2B0 22733KDI2B0 23333KDA2B0 23333KDM2B0 23333KDI2B0 0.6 23933KDA2B0 23933KDM2B0 1000 23933KDI2B0 1250 24733KDA2B0 24733KDM2B0 24733KDI2B0 25633KDA2B0 25633KDM2B0 25633KDI2B0 26833KDA2B0 26833KDM2B0 26833KDI2B0 28233KDA2B0 28233KDM2B0 28233KDI2B0 31033KDA2B0 31033KDM2B0 31033KDI2B0 31233KDA2B0 31233KDM2B0 31233KDI2B0 31533KDA2B0 31533KDM2B0 31533KDI2B0 31833KDA2B0 31833KDM2B0 31833KDI2B0 1000 1000 0.82 32233KDA2B0 32233KDM2B0 32233KDI2B0 32733KDA2B0 32733KDM2B0 32733KDI2B0 1.1 750 750 33333KDA2B0 33333KDM2B0 33333KDI2B0 TAPED REEL Ø = 500 mm (1)(2) H = 18.5 mm; SPQ P0 = 12.7 mm 41033MI02W0 41533MI02W0 42233MI02W0 43333MI02W0 44733MI02W0 46833MI02W0 48233MI02W0 500 450 350 300 300 - - 21033KC02W0 21233KC02W0 21533KC02W0 21833KC02W0 22233KC02W0 22733KC02W0 23333KC02W0 23933KC02W0 24733KC02W0 25633KC02W0 21033KD02W0 21233KD02W0 21533KD02W0 21833KD02W0 22233KD02W0 22733KD02W0 23333KD02W0 23933KD02W0 24733KD02W0 25633KD02W0 26833KD02W0 28233KD02W0 31033KD02W0 31233KD02W0 31533KD02W0 31833KD02W0 32233KD02W0 32733KD02W0 33333KD02W0 600 2500 2000 1900 1400 1100 900 Document Number: 28185 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) CAP. (μF) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.120 0.150 0.180 330 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 DIMENSIONS wxhxl (mm) 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 9.0 x 19.0 x 31.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.5 18.0 x 28.0 x 31.5 21.0 x 31.0 x 31.0 MASS (g) (3) SHORT LEADS LONG LEADS TAPED REEL lt = 3.5 mm + 1 mm/- 0.5 mm Ø = 500 mm (1)(2) lt = 5.0 mm lt = 25.0 mm (≤ 10 mm) SPQ SPQ H = 18.5 mm; SPQ ± 1.0 mm ± 2.0 mm or 3.5 mm ± 0.3 mm P0 = 12.7 mm (≥ 15 mm) PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % 31033KFP2B0 31033KFM2B0 31033KFI2B0 31033KF02W0 31233KFP2B0 31233KFM2B0 31233KFI2B0 31233KF02W0 31533KFP2B0 31533KFM2B0 31533KFI2B0 31533KF02W0 31833KFP2B0 31833KFM2B0 31833KFI2B0 31833KF02W0 1.0 32233KFP2B0 32233KFM2B0 1000 32233KFI2B0 1000 32233KF02W0 1100 32733KFP2B0 32733KFM2B0 32733KFI2B0 32733KF02W0 33333KFP2B0 33333KFM2B0 33333KFI2B0 33333KF02W0 33933KFP2B0 33933KFM2B0 33933KFI2B0 33933KF02W0 34733KFP2B0 34733KFM2B0 34733KFI2B0 34733KF02W0 35633KFP2B0 35633KFM2B0 35633KFI2B0 35633KF02W0 1.4 1000 1000 900 36833KFP2B0 36833KFM2B0 36833KFI2B0 36833KF02W0 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 38233KFP2B0 38233KFM2B0 38233KFI2B0 38233KF02W0 1.8 1000 500 800 41033KFP2B0 41033KFM2B0 41033KFI2B0 41033KF02W0 41233KFP2B0 41233KFM2B0 41233KFI2B0 41233KF02W0 1000 500 650 2.4 41533KFP2B0 41533KFM2B0 41533KFI2B0 41533KF02W0 3.0 41833KFP2B0 41833KFM2B0 500 41833KFI2B0 500 41833KF02W0 600 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 41033KIP2T0 41033KIM2T0 41033KII2B0 41033KI02W0 2.4 300 41233KII2B0 250 600 41233KIP2T0 41233KIM2T0 41233KI02W0 41533KIP2T0 41533KIM2T0 41533KII2B0 41533KI02W0 41833KIP2T0 41833KIM2T0 41833KII2B0 41833KI02W0 2.9 200 250 500 42233KIP2T0 42233KIM2T0 42233KII2B0 42233KI02W0 42733KIP2T0 42733KIM2T0 42733KII2B0 42733KI02W0 200 250 450 3.8 43333KIP2T0 43333KIM2T0 43333KII2B0 43333KI02W0 6.8 43933KIP2T0 43933KIM2T0 200 43933KII2B0 200 43933KI02W0 350 44733KIP2T0 44733KIM2T0 44733KII2B0 44733KI02W0 150 200 300 7.8 45633KIP2T0 45633KIM2T0 45633KII2B0 45633KI02W0 8.0 46833KIP2T0 46833KIM2T0 150 46833KII2B0 200 46833KI02W0 300 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 42233KKP2T0 42233KKM2T0 42233KKI2B0 42733KKP2T0 42733KKM2T0 42733KKI2B0 5.5 100 150 43333KKP2T0 43333KKM2T0 43333KKI2B0 43933KKP2T0 43933KKM2T0 43933KKI2B0 44733KKP2T0 44733KKM2T0 44733KKI2B0 100 125 7.4 45633KKP2T0 45633KKM2T0 45633KKI2B0 46833KKP2T0 46833KKM2T0 46833KKI2B0 9.2 100 125 48233KKP2T0 48233KKM2T0 48233KKI2B0 51033KKP2T0 51033KKM2T0 51033KKI2B0 12.3 100 125 51233KKP2T0 51233KKM2T0 51233KKI2B0 51533KKP2T0 51533KKM2T0 100 51533KKI2B0 100 16.1 51833KKP2T0 51833KKM2T0 51833KKI2B0 50 75 20.3 52233KKP2T0 52233KKM2T0 52233KKI2B0 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only Revision: 16-Jul-2020 Document Number: 28185 5 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents APPROVALS SAFETY APPROVALS X1 EN 60384-14 (ENEC) (= IEC 60384-14 ed-4) UL 60384-14 CSA-E384-14 VOLTAGE VALUE FILE NUMBERS LINK 330 VAC 1 nF to 2.2 μF 40031978 www.vishay.com/doc?28229 330 VAC 330 VAC 1 nF to 2.2 μF 1 nF to 2.2 μF CQC 330 VAC 1 nF to 2.2 μF CB-test certificate 330 VAC 1 nF to 2.2 μF E354331B E354331B L-16001150858 F-12001067600 DE1-48009/M1 www.vishay.com/doc?28210 www.vishay.com/doc?28210 www.vishay.com/doc?28235 www.vishay.com/doc?28236 www.vishay.com/doc?28218 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland and United Kingdom. MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For original pitch ≤ 15 mm the capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (lmax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. • For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm and Δh = 0.1 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm and Δh = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + Δw Eccentricity Imax. = I + ΔI CBA116 hmax. = h + Δh Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 16-Jul-2020 Document Number: 28185 6 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents 4 2 Typical 0 Max. -2 -4 Dissipation Factor (x 10-4) ΔC/C (%) CHARACTERISTICS 1000 100 220 nF ≤ C ≤ 2.2 μF 47 nF ≤ C ≤ 220 nF 10 nF ≤ C ≤ 47 nF C ≤ 10 nF 10 Min. -6 1 - 50 0 50 100 10 100 1000 10 000 Tamb (°C) Tangent of loss angle as a function of frequency (typical curve) f (MHz) Z (Ω) Capacitance as a function of ambient temperature (typical curve) 1000 1 nF 4.7 nF 10 nF 47 nF 100 100 000 f (Hz) 10 100 10 1 100 nF 470 nF 1 μF 2.2 μF 0.1 X1 1 0.01 0.001 10 000 0.1 100 000 1 000 000 10 000 000 100 000 000 1 10 100 1000 10 000 Resonant frequency as a function of capacitance (typical curve) Impedance as a function of frequency (typical curve) 1000 10 000 AC Current (mA) AC Voltage (V) 100 000 C (nF) f (Hz) 2.2 μF 1 μF 470 nF 1000 100 nF 100 100 47 nF 10 nF 10 4.7 nF Tamb ≤ 110 °C 1 nF 10 10 100 1000 10 000 100 000 1 000 000 1 1000 10 000 100 000 Max. RMS voltage as a function of frequency Revision: 16-Jul-2020 1 000 000 f (Hz) f (Hz) Max. RMS current as a function of frequency Document Number: 28185 7 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC RC (s) www.vishay.com Vishay BCcomponents 106 105 104 0 20 40 60 80 100 Tamb (°C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES • For X1 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 330 VAC • For series impedance applications we refer to the application note: www.vishay.com/doc?28153 • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used • The maximum ambient temperature must not exceed 110 °C • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 465 VDC and divided by the applied voltage INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data”. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s Revision: 16-Jul-2020 No visible damage Document Number: 28185 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.20 Solvent resistance of the marking Isopropyl alcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -55 °C θB = +110 °C 5 cycles Duration t = 30 min Rapid change of temperature 4.6.1 Inspection Visual examination 4.7 Mounting: see section “Mounting” of this specification Procedure B4: frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Vibration 4.7.2 Final inspection Visual examination 4.9 Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Shock 4.9.2 Final measurements Revision: 16-Jul-2020 No visible damage Legible marking No visible damage No visible damage Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification Document Number: 28185 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 110 °C 4.11.3 Damp heat cyclic Test Db First cycle Duration: 16 h 4.11.4 Cold Temperature: -55 °C 4.11.5 Damp heat cyclic Test Db remaining cycles Duration: 2 h 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.11.1 Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH, no load 4.12.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.12.1. Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 16-Jul-2020 Document Number: 28185 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 4.0 kV for C ≤ 1 μF X1: 4.0 kV/√C for C > 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 110 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements No self healing breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.13.1 Voltage proof 1900 VDC; 1 min between terminations 2160 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles charged to 465 VDC Discharge resistance: Rmin. = 2.2 Ω for pitch 37.5 mm and 52.5 mm 465 V DC R = ---------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.15.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 16-Jul-2020 Document Number: 28185 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 330VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability Revision: 16-Jul-2020 20 cycles of 4 kV discharges on the test capacitor connected to URAC The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28185 12 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000