F339X124748KD02W0

F339X1 480VAC www.vishay.com Vishay BCcomponents Interference Suppression Film Capacitor - Class X1 Radial MKP 480 VAC - 3-Phase Across the Line FEATURES • AEC-Q200 qualified (rev. D, 85 °C maximum application temperature) for pitch 10 mm, 15 mm, and 22.5 mm • Internal series construction • Stable capacitance in severe ambient conditions 85 °C, 85 % RH, 400 VAC, 500 h for C > 100 nF • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS • 3-phase and continuous across the line X1 applications • Standard and continuous in series with the mains operation See also application note: www.vishay.com/doc?28153 QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Climatic testing class according to IEC 60068-1 Rated AC voltage 0.001 μF to 1.0 μF (preferred values according to E6) ± 20 %; ± 10 %; (± 5 % on request) 55 / 110 / 56 / B 480 VAC; 50 Hz to 60 Hz 1000 VDC at 85 °C 800 VDC at 110 °C 110 °C IEC 60384-14 ed-4 (2013) and EN 60384-14 IEC 60065 requires pass. flamm. class B CSA-E384-14; UL 60384-14 CQC GB/T6346.14-2015 Polypropylene film Metallized Series construction Permissible DC voltage Maximum application temperature Reference standards Dielectric Electrodes Construction Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Tinned wire C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location, year and week; manufacturer's logo or name; safety approvals Encapsulation Leads Marking Note • For more detailed data and test requirements, contact rfi@vishay.com DIMENSIONS in millimeters l w h lt P Revision: 18-Oct-2021 Ø dt Document Number: 28186 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER CODE Example: MULTIPLIER (nF) P1 (mm) PITCH CODE 10 D 15 F 0.1 2 310 10 nF 0.01 μF 22.5 I 1 3 410 100 nF 0.1 μF 27.5 K 10 4 510 1000 nF 1.0 μF 100 5 SPECIAL CODE FOR TERMINAL VOLTAGE 2 2 pins (#) Customized 48 = 480 VAC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 F 3 3 9 X 1 4 1 0 4 8 M F M 2 B 0 TOLERANCE CLASS TYPE lt (mm) LEAD LENGTH CODE M ± 20 % K ± 10 % J ± 5% A Special tolerance PITCH (mm) SPECIAL 0 = Standard Other = Special PACKING CODE 3.5 + 1, - 0.5 A 7.5 and 10 B/T 3.5 ± 0.3 P ≥ 15 W 5±1 M All I All 25 ± 2 PACKING STYLE Bulk/loose (1) Tape and reel (H: 18.5 mm; 500 mm) REMARK Not for bent back Pitch ≤ 22.5 mm 0: Space holder Notes • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) Packaging will be bulk for all capacitors with pitch ≤ 15 mm and such with long leads (> 5 mm). Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T”. Revision: 18-Oct-2021 Document Number: 28186 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URAC) 480 V Permissible DC voltage (URDC) 1000 V Tangent of loss angle At 1 kHz At 10 kHz C < 470 nF ≤ 10 x 10-4 ≤ 20 x 10-4 470 nF ≤ C ≤ 1 μF ≤ 20 x 10-4 ≤ 70 x 10-4 C > 1 μF ≤ 30 x 10-4 Rated voltage pulse slope (dU/dt)R at 670 V 100 V/μs R between leads, for C ≤ 0.33 μF at 100 V; 1 min > 15 000 MΩ RC between leads, for C > 0.33 μF at 100 V; 1 min > 5000 s R between leads and case; 100 V; 1 min > 30 000 MΩ Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s: C ≤ 1.2 μF 3400 V; 1 min Withstanding (AC) voltage between leads and case 2380 V; 1 min Maximum application temperature 110 °C Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) (4) MASS (g) (3) SHORT LEADS lt = 3.5 mm +1 mm/-0.5 mm (PITCH ≤ 10 mm) or 3.5 mm ± 0.3 mm (PITCH ≥ 15 mm) lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm SPQ TAPED REEL Ø = 500 mm (1)(2) H = 18.5 mm; SPQ P0 = 12.7 mm PITCH = 10 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 0.0010 21048MDA2B0 21048MDM2B0 21048MDI2B0 21048MD02W0 0.0015 21548MDA2B0 21548MDM2B0 21548MDI2B0 21548MD02W0 22248MDA2B0 22248MDM2B0 23348MDA2B0 23348MDM2B0 24748MDA2B0 24748MDM2B0 1000 24748MDI2B0 1000 24748MD02W0 26848MDA2B0 26848MDM2B0 26848MD02W0 31048MDA2B0 31048MDM2B0 0.0022 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 0.0033 0.0047 0.0068 0.010 6.0 x 12.0 x 12.5 1.1 1000 22248MDI2B0 1250 23348MDI2B0 750 26848MDI2B0 31048MDI2B0 22248MD02W0 1400 23348MD02W0 750 31048MD02W0 1100 900 PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 480 0.010 31048MFP2B0 31048MFM2B0 31048MFI2B0 0.015 31548MFP2B0 31548MFM2B0 31548MFI2B0 32248MFP2B0 32248MFM2B0 33348MFP2B0 33348MFM2B0 34748MFP2B0 34748MFM2B0 1000 34748MFI2B0 1000 0.022 5.0 x 11.0 x 17.5 1.0 6.0 x 12.0 x 17.5 1.4 0.033 0.047 1250 32248MFI2B0 31048MF02W0 1000 33348MFI2B0 31548MF02W0 32248MF02W0 1100 33348MF02W0 34748MF02W0 900 PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 0.068 8.5 x 15.0 x 17.5 2.4 36848MFP2B0 36848MFM2B0 750 36848MFI2B0 500 36848MF02W0 650 0.100 10 x 16.5 x 17.5 3.0 41048MFP2B0 41048MFM2B0 500 41048MFI2B0 450 41048MF02W0 600 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 0.047 0.068 6.0 x 15.5 x 26.0 2.4 0.10 34748MIP2T0 34748MIM2T0 36848MIP2T0 36848MIM2T0 41048MIP2T0 41048MIM2T0 34748MII2B0 300 36848MII2B0 34748MI02W0 250 41048MII2B0 36848MI02W0 600 41048MI02W0 0.15 7.0 x 16.5 x 26.0 2.9 41548MIP2T0 41548MIM2T0 200 41548MII2B0 250 41548MI02W0 500 0.22 8.5 x 18.0 x 26.0 3.8 42248MIP2T0 42248MIM2T0 200 42248MII2B0 250 42248MI02W0 450 0.33 12 x 22.0 x 26.0 7.8 43348MIP2T0 43348MIM2T0 150 43348MII2B0 200 43348MI02W0 300 Revision: 18-Oct-2021 Document Number: 28186 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) (4) MASS (g) (3) SHORT LEADS lt = 3.5 mm +1 mm/-0.5 mm (PITCH ≤ 10 mm) or 3.5 mm ± 0.3 mm (PITCH ≥ 15 mm) lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm SPQ TAPED REEL Ø = 500 mm (1)(2) H = 18.5 mm; SPQ P0 = 12.7 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 41548MKP2T0 41548MKM2T0 42248MKP2T0 42248MKM2T0 7.4 43348MKP2T0 43348MKM2T0 100 43348MKI2B0 125 13.0 x 23.0 x 31.0 9.2 44748MKP2T0 44748MKM2T0 100 44748MKI2B0 125 0.68 15.0 x 25.0 x 31.5 12.3 46848MKP2T0 46848MKM2T0 100 46848MKI2B0 125 1.0 18.0 x 28.0 x 31.5 16.1 51048MKP2T0 51048MKM2T0 100 51048MKI2B0 100 0.15 9.0 x 19.0 x 31.5 5.5 0.33 11.0 x 21.0 x 31.0 0.47 0.22 100 41548MKI2B0 42248MKI2B0 150 - PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % 0.0010 21048KDA2B0 21048KDM2B0 21048KDI2B0 21048KD02W0 0.0012 21248KDA2B0 21248KDM2B0 21248KDI2B0 21248KD02W0 0.0015 21548KDA2B0 21548KDM2B0 21548KDI2B0 21548KD02W0 0.0018 21848KDA2B0 21848KDM2B0 21848KDI2B0 22248KDA2B0 22248KDM2B0 0.0027 22748KDA2B0 22748KDM2B0 22748KDI2B0 22748KD02W0 0.0033 23348KDA2B0 23348KDM2B0 23348KDI2B0 23348KD02W0 0.0039 23948KDA2B0 23948KDM2B0 23948KDI2B0 23948KD02W0 24748KDA2B0 24748KDM2B0 25648KDA2B0 25648KDM2B0 26848KDA2B0 26848KDM2B0 28248KDA2B0 28248KDM2B0 0.0022 0.0047 480 0.0056 0.0068 0.0082 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 1000 1000 750 22248KDI2B0 24748KDI2B0 25648KDI2B0 26848KDI2B0 28248KDI2B0 1250 1000 750 21848KD02W0 22248KD02W0 24748KD02W0 25648KD02W0 26848KD02W0 28248KD02W0 1400 1100 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % 0.010 31048KFP2B0 31048KFM2B0 31048KFI2B0 31048KF02W0 0.012 31248KFP2B0 31248KFM2B0 31248KFI2B0 31248KF02W0 31548KFP2B0 31548KFM2B0 31848KFP2B0 31848KFM2B0 0.022 32248KFP2B0 32248KFM2B0 32248KFI2B0 32248KF02W0 0.027 32748KFP2B0 32748KFM2B0 32748KFI2B0 32748KF02W0 0.033 33348KFP2B0 33348KFM2B0 33348KFI2B0 33948KFP2B0 33948KFM2B0 0.015 0.018 0.039 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 1.0 1.4 1250 1000 31548KFI2B0 31848KFI2B0 33948KFI2B0 1000 1000 31548KF02W0 31848KF02W0 33348KF02W0 33948KF02W0 1100 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 0.047 0.056 0.068 0.082 0.100 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 Revision: 18-Oct-2021 34748KFP2B0 34748KFM2B0 35648KFP2B0 35648KFM2B0 36848KFP2B0 36848KFM2B0 38248KFP2B0 38248KFM2B0 41048KFP2B0 41048KFM2B0 750 750 500 34748KFI2B0 35648KFI2B0 36848KFI2B0 38248KFI2B0 41048KFI2B0 500 500 450 34748KF02W0 35648KF02W0 36848KF02W0 38248KF02W0 41048KF02W0 800 650 600 Document Number: 28186 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION CATALOG NUMBER F339X1... AND PACKAGING LOOSE IN BOX URAC (V) 480 CAP. (μF) 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 DIMENSIONS wxhxl (mm) (4) 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 9.0 x 19.0 x 31.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.5 18.0 x 28.0 x 31.5 21.0 x 31.0 x 31.0 MASS (g) (3) SHORT LEADS lt = 3.5 mm +1 mm/-0.5 mm (PITCH ≤ 10 mm) or 3.5 mm ± 0.3 mm (PITCH ≥ 15 mm) lt = 5.0 mm ± 1.0 mm TAPED REEL LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm SPQ PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 34748KIP2T0 34748KIM2T0 34748KII2B0 35648KIP2T0 35648KIM2T0 35648KII2B0 2.4 36848KIP2T0 36848KIM2T0 300 36848KII2B0 250 38248KIP2T0 38248KIM2T0 38248KII2B0 41048KIP2T0 41048KIM2T0 41048KII2B0 2.9 41248KIP2T0 41248KIM2T0 200 41248KII2B0 250 41548KIP2T0 41548KIM2T0 41548KII2B0 3.8 200 250 41848KIP2T0 41848KIM2T0 41848KII2B0 6.8 42248KIP2T0 42248KIM2T0 200 42248KII2B0 200 42748KIP2T0 42748KIM2T0 42748KII2B0 7.8 150 200 43348KIP2T0 43348KIM2T0 43348KII2B0 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 41548KKP2T0 41548KKM2T0 41548KKI2B0 5.5 41848KKP2T0 41848KKM2T0 100 41848KKI2B0 150 42248KKP2T0 42248KKM2T0 42248KKI2B0 42748KKP2T0 42748KKM2T0 42748KKI2B0 7.4 100 125 43348KKP2T0 43348KKM2T0 43348KKI2B0 43948KKP2T0 43948KKM2T0 43948KKI2B0 9.2 100 125 44748KKP2T0 44748KKM2T0 44748KKI2B0 12.3 45648KKP2T0 45648KKM2T0 100 45648KKI2B0 125 46848KKP2T0 46848KKM2T0 46848KKI2B0 16.1 100 100 48248KKP2T0 48248KKM2T0 48248KKI2B0 20.3 51048KKP2T0 51048KKM2T0 50 51048KKI2B0 75 Ø = 500 mm (1)(2) H = 18.5 mm; SPQ P0 = 12.7 mm 34748KI02W0 35648KI02W0 36848KI02W0 38248KI02W0 41048KI02W0 41248KI02W0 41548KI02W0 41848KI02W0 42248KI02W0 42748KI02W0 43348KI02W0 600 500 450 350 300 - - Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” APPROVALS SAFETY APPROVALS X1 EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 (2013)) UL 60384-14 CSA-E384-14 VOLTAGE VALUE FILE NUMBERS LINK 480 VAC 1 nF to 1.0 μF 40033060 www.vishay.com/doc?28230 480 VAC 480 VAC 1 nF to 1.0 μF 1 nF to 1.0 μF E354331A www.vishay.com/doc?28209 E354331A www.vishay.com/doc?28209 L-16001150859 www.vishay.com/doc?28233 CQC 480 VAC 1 nF to 1.0 μF F-16001161460 www.vishay.com/doc?28234 CB-test certificate 480 VAC 1 nF to 1.0 μF DE1-58018 www.vishay.com/doc?28219 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland and United Kingdom. Revision: 18-Oct-2021 Document Number: 28186 5 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For original pitch ≤ 15 mm the capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) and height (hmax.) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below. • For products with pitch ≤ 15mm, Δw = Δl = 0.3 mm and Δh = 0.1 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm and Δh = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + Δw Eccentricity Imax. = I + ΔI CBA116 hmax. = h + Δh Seating plane For the minimum product dimensions for length (lmin.), width (wmin.) and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw and hmin. = h - Δh following • For products with pitch ≤ 10 mm, Δl = 0.3 mm and Δw = Δh = 0.3 mm • For products with pitch = 15 mm, Δl = 0.5 mm and Δw = Δh = 0.5 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δl = 1.0 mm and Δw = Δh = 0.5 mm SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 18-Oct-2021 Document Number: 28186 6 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents 4 2 Typical 0 Max. -2 -4 Dissipation Factor (x 10-4) ΔC/C (%) CHARACTERISTICS 1000 100 220 nF < C ≤ 1.2 μF 47 nF < C ≤ 220 nF 10 nF < C ≤ 47 nF C ≤ 10 nF 10 Min. -6 1 - 50 0 50 100 10 100 1000 10 000 Tamb (°C) Tangent of loss angle as a function of frequency (typical curve) f (MHz) Z (Ω) Capacitance as a function of ambient temperature (typical curve) 1000 1 nF 4.7 nF 10 nF 100 100 000 f (Hz) 10 100 10 1 47 nF 100 nF 470 nF 1 μF 0.1 X1 1 0.01 0.001 10 000 0.1 100 000 1 000 000 10 000 000 100 000 000 1 10 100 1000 10 000 Resonant frequency as a function of capacitance (typical curve) Impedance as a function of frequency (typical curve) 1000 10 000 AC Current (mA) AC Voltage (V) 100 000 C (nF) f (Hz) 100 1 μF 470 nF 1000 100 nF 100 47 nF 10 nF 10 4.7 nF Tamb ≤ 110 °C 1 nF 10 10 100 1000 10 000 100 000 1 1000 10 000 100 000 Max. RMS voltage as a function of frequency Revision: 18-Oct-2021 1 000 000 f (Hz) f (Hz) Max. RMS current as a function of frequency Document Number: 28186 7 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC RC (s) www.vishay.com Vishay BCcomponents 106 105 104 0 20 40 60 80 100 Tamb (°C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES • For X1 electromagnetic interference suppression in standard and 3-phase across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 480 VAC • For series impedance applications we refer to the application note: www.vishay.com/doc?28153 • To ensure withstanding high humidity requirements in the application it is recommended not to damage the epoxy adhesion at the leads. Therefore the leads may not be damaged or bent before soldering. Maximum Allowed Proof Voltage (V) • For capacitors connected in parallel, normally the proof voltage must be reduced in function of the total parallel capacitance value. 4000 3500 3000 2500 2000 1500 1000 500 0 0 2 4 6 8 10 12 14 16 18 20 Total Parallel Capacitance (μF) Proof voltage as function of total parallel capacitance • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • The maximum ambient temperature must not exceed 110 °C. • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 670 VDC and divided by the applied voltage. Revision: 18-Oct-2021 Document Number: 28186 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-4 (2013) and Specific Reference Data”. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s No visible damage SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.20 Solvent resistance of the marking Isopropyl alcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -55 °C θB = +110 °C 5 cycles Duration t = 30 min Rapid change of temperature Revision: 18-Oct-2021 No visible damage Legible marking Document Number: 28186 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Inspection 4.7 Vibration CONDITIONS Visual examination Visual examination 4.9 Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 4.9.2 Final measurements No visible damage Mounting: see section “Mounting” of this specification Procedure B4: frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Shock PERFORMANCE REQUIREMENTS No visible damage Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 110 °C 4.11.3 Damp heat cyclic Test Db First cycle Duration: 16 h 4.11.4 Cold Temperature: -55 °C 4.11.5 Damp heat cyclic Test Db remaining cycles Duration: 2 h 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.11.1 Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 18-Oct-2021 Document Number: 28186 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C2A 4.12A Damp heat steady state with load RH: 85 %, temp: 85 °C, load: 400 VAC, duration: 500 h for C > 100 nF 4.12.1A Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3A Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % of the value measured in 4.12.1A. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.12.1A. Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 4.0 kV for C ≤ 1 μF X1: 4.0 kV/√C for C > 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 110 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.13.1 Voltage proof 1900 VDC; 1 min between terminations 2380 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 18-Oct-2021 No self healing breakdowns or flash-over Document Number: 28186 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F339X1 480VAC www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles charged to 670 VDC Discharge resistance: 670 V DC R = ---------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz for C ≤ 1 μF Tangent of loss angle at 1 kHz for C > 1 μF 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ ≤ 0.008 for ≤ 1 μF Increase of tan δ ≤ 0.005 for C > 1 μF Compared to values measured in 4.15.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability Revision: 18-Oct-2021 20 cycles of 4 kV discharges on the test capacitor connected to URAC The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28186 12 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000