F340X258230KPM2T0

F340X2 305VAC www.vishay.com Vishay BCcomponents THB Grade IIIB Class X2 Interference Suppression Film Capacitor Radial MKP 305 VAC - Across the Line FEATURES • IEC 60384-14: 2013 / AMD1: 2016 grade IIIB: 85 °C, 85 % RH, 1000 h at URAC • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS For industrial across the line X2 applications. See also application note: www.vishay.com/doc?28153 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models QUICK REFERENCE DATA 1 μF to 20 μF (preferred values according to E12) ± 20 %; ± 10 % 40 / 105 / 56B 305 VAC; 50 Hz to 60 Hz 630 VDC at 105 °C 850 VDC at 85 °C 105 °C EC 60384-14:2013 IEC 60384-14:2013 / AMD1:2016 EN 60384-14 IEC 60065 requires passive flammability class B: for volume ≥ 1750 mm3 UL 60384-14 (2nd edition) CSA-E60384-1:14 (3rd edition) Polypropylene film Metallized Mono construction Rated capacitance range Capacitance tolerance Climatic testing class according to IEC 60068-1 Rated AC voltage Permissible DC voltage Maximum application temperature Reference standards Dielectric Electrodes Construction Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Tinned wire C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material; manufacturer location, year and week; manufacturer’s logo or name; safety approvals Encapsulation Terminals Marking Note • For more detailed data and test requirements, contact rfi@vishay.com DIMENSIONS in millimeters l w h lt P Ø dt Note • Ø dt ± 10 % of standard diameter specified Revision: 25-Jul-2022 Document Number: 26074 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) 10 4 100 5 1000 6 CAPACITANCE (numerically) P1 (mm) PITCH CODE 27.5 K Example: 410 100 nF 0.1 μF 510 1000 nF 1.0 μF 610 10 000 nF 10 μF 37.5 P 52.5 Y SPECIAL CODE FOR TERMINAL VOLTAGE 2 2 pins (1) Customized 30 = 305 VAC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 F 3 4 0 X 2 5 1 0 3 K K M 2 T 0 CLASS SPECIAL TOLERANCE TYPE It (mm) 0 M ± 20 % 0 = Standard K ± 10 % Other = Special LEAD LENGTH CODE PITCH (mm) PACKING CODE PACKING STYLE REMARK 3.5 ± 0.5 P All T Loose For all pitch 5±1 M All 25 ± 2 I All 0: Space holder Note • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) VALUE 305 VAC 630 VDC at 105 ºC 850 VDC at 85 ºC Permissible DC voltage (URDC) Tangent of loss angle: 1 μF < C ≤ 4.7 μF 4.7 μF < C ≤ 12 μF C > 12 μF Rated voltage pulse slope (du/dt)R at 435 VDC Pitch = 27.5 mm Pitch = 37.5 mm Pitch = 52.5 mm RC between leads, for C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s: 1 μF ≤ C ≤ 12 μF > 12 μF Withstanding (AC) voltage between leads and case At 1 kHz ≤ 30 x 10-4 ≤ 50 x 10-4 ≤ 100 x 10-4 At 10 kHz ≤ 60 x 10-4 100 V/μs 50 V/μs 15 V/μs > 5000 s > 30 000 MΩ 2200 V; 1 min 1800 V; 1 min 2110 V; 1 min Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 Revision: 25-Jul-2022 Document Number: 26074 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) 305 CAP. (μF) DIMENSIONS (1) wxhxl (mm) 1.0 1.5 2.2 3.3 4.7 15.0 x 25.0 x 32.0 15.0 x 25.0 x 32.0 18.0 x 28.0 x 32.0 21.0 x 31.0 x 32.0 22.0 x 38.0 x 32.0 6.8 10 21.5 x 38.5 x 42.0 30.0 x 45.0 x 42.0 15 20 30.0 x 45.0 x 57.5 35.0 x 50.0 x 57.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 15.0 x 25.0 x 32.0 15.0 x 25.0 x 32.0 15.0 x 25.0 x 32.0 18.0 x 28.0 x 32.0 18.0 x 28.0 x 32.0 21.0 x 31.0 x 32.0 21.0 x 31.0 x 32.0 22.0 x 38.0 x 32.0 22.0 x 38.0 x 32.0 5.6 6.8 8.2 10 12 21.5 x 38.5 x 42.0 21.5 x 38.5 x 42.0 30.0 x 45.0 x 42.0 30.0 x 45.0 x 42.0 30.0 x 45.0 x 42.0 15 18 20 30.0 x 45.0 x 57.5 35.0 x 50.0 x 57.5 35.0 x 50.0 x 57.5 CATALOG NUMBER F340X2... AND PACKAGING LOOSE IN BOX SHORT LEADS LONG LEADS lt = 3.5 mm ± 0.5 mm lt = 5.0 mm ± 1.0 mm SPQ lt = 25.0 mm ± 2.0 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 14.0 51030MKP2T0 51030MKM2T0 95 51030MKI2T0 13.1 51530MKP2T0 51530MKM2T0 95 51530MKI2T0 17.9 52230MKP2T0 52230MKM2T0 80 52230MKI2T0 23.6 53330MKP2T0 53330MKM2T0 65 53330MKI2T0 29.1 54730MKP2T0 54730MKM2T0 65 54730MKI2T0 PITCH = 37.5 mm ± 0.5 mm; dt = 1.0 mm ± 0.1 mm; C-TOL. = ± 20 % 36.9 56830MPP2T0 56830MPM2T0 84 56830MPI2T0 64.9 61030MPP2T0 61030MPM2T0 63 61030MPI2T0 PITCH = 52.5 mm ± 0.5 mm; dt = 1.2 mm ± 0.12 mm; C-TOL. = ± 20 % 85.9 61530MYP2T0 61530MYM2T0 45 61530MYI2T0 114.7 62030MYP2T0 62030MYM2T0 40 62030MYI2T0 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 13.9 51030KKP2T0 51030KKM2T0 95 51030KKI2T0 13.3 51230KKP2T0 51230KKM2T0 95 51230KKI2T0 12.9 51530KKP2T0 51530KKM2T0 95 51530KKI2T0 18.1 51830KKP2T0 51830KKM2T0 80 51830KKI2T0 17.5 52230KKP2T0 52230KKM2T0 80 52230KKI2T0 23.9 52730KKP2T0 52730KKM2T0 65 52730KKI2T0 22.9 53330KKP2T0 53330KKM2T0 65 53330KKI2T0 29.5 53930KKP2T0 53930KKM2T0 65 53930KKI2T0 28.4 54730KKP2T0 54730KKM2T0 65 54730KKI2T0 PITCH = 37.5 mm ± 0.5 mm; dt = 1.0 mm ± 0.1 mm; C-TOL. = ± 10 % 33.8 55630KPP2T0 55630KPM2T0 84 55630KPI2T0 31.6 56830KPP2T0 56830KPM2T0 84 56830KPI2T0 57.4 58230KPP2T0 58230KPM2T0 63 58230KPI2T0 53.2 61030KPP2T0 61030KPM2T0 63 61030KPI2T0 49.3 61230KPP2T0 61230KPM2T0 63 61230KPI2T0 PITCH = 52.5 mm ± 0.5 mm; dt = 1.2 mm ± 0.12 mm; C-TOL. = ± 10 % 83.9 61530KYP2T0 61530KYM2T0 45 61530KYI2T0 116.1 61830KYP2T0 61830KYM2T0 40 61830KYI2T0 112.0 62030KYP2T0 62030KYM2T0 40 62030KYI2T0 MASS (g) SPQ 95 95 80 65 60 84 63 45 40 95 95 95 80 80 65 65 60 60 84 84 63 63 63 45 40 40 Notes • SPQ = Standard Packing Quantity (1) For tolerances see chapter “Dimensions Tolerances” APPROVALS SAFETY APPROVALS X2 EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 2013) UL 60384-14 (2nd edition) CSA-E60384-1:14 (3rd edition) VOLTAGE VALUE FILE NUMBERS LINK 305 VAC 1 μF to 20 μF 40049214 www.vishay.com/doc?28258 305 VAC 305 VAC 1 μF to 20 μF 1 μF to 20 μF E354331 www.vishay.com/doc?28261 E354331 www.vishay.com/doc?28261 CQC9001219625 (L) www.vishay.com/doc?28259 CQC 305 VAC 1 μF to 20 μF CQC9001219626 (F) www.vishay.com/doc?28260 CB-test certificate 305 VAC 1 μF to 20 μF DE1-61671 www.vishay.com/doc?28257 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland, and United Kingdom. Revision: 25-Jul-2022 Document Number: 26074 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitor unit is designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 Specific Method of Mounting to Withstand Vibration and Shock The capacitor unit is designed for mounting on a printed-circuit board. In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. The capacitor shall be mechanically fixed by the leads and the body clamped. Dimensions Tolerances For the maximum product dimensions for length (lmax.), width (wmax.), and height (hmax.) use the following tolerances: lmax. = l + Δl, wmax. = w + Δw, and hmax. = h + Δh • For products with pitch = 27.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm For the minimum product dimensions for length (lmin.), width (wmin.) and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh • For products with pitch = 27.5 mm, Δw = Δl = Δh = 1.0 mm • For products with pitch = 37.5 mm, Δw = Δl = Δh = 1.0 mm • For products with pitch = 52.5 mm, Δw = Δl = Δh = 1.5 mm Space Requirements for Printed-Circuit Board For product height with seating plane as given by “IEC 60717” as reference. The maximum space for length (lmax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawings. • For products with pitch = 27.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. The maximum length and width of film capacitors is shown in the figure: wmax. = w + Δw Eccentricity Imax. = I + ΔI CBA116 hmax. = h + Δh Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified. all electrical values apply to an ambient temperature of 23 °C ± 1°C. an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing. a conditioning period shall be applied over 96 hours ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 25-Jul-2022 Document Number: 26074 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents CHARACTERISTICS Axis Title Axis Title 10000 2 10000 100 1 μF 10 Typical Maximum -2 100 1000 6.8 μF 1 1st line 2nd line 0 2nd line Impedance (Ω) 4.7 μF 1000 1st line 2nd line 2nd line Change in Capacitance (%) 4 10 μF 0.1 20 μF 100 15 μF -4 0.01 Minimum 0.001 10 000 10 -6 -50 0 50 100 100 000 10 10M 1M Ambient Temperature (°C) Frequency (Hz) Capacitance as a function of ambient temperature (typical curve) Impedance as a function of frequency (typical curve) Axis Title Axis Title 10000 100 10000 10 000 15 μF 10 μF 6.8 μF 1 100 4.7 μF 2.2 μF 1000 1000 C > 12 μF 100 1st line 2nd line 1000 10 1st line 2nd line 2nd line AC Current (A) 20 μF 2nd line Dissipation Factor (x 10-4) Tamb ≤ 85 °C, UR = 305 VAC 4.7 μF < C ≤ 12 μF 10 100 1 μF < C ≤ 4.7 μF 1 1 μF 10 100 000 0.1 10 100 1000 10 000 0.1 10 100 1000 10 100 000 Frequency (Hz) Frequency (Hz) Max. RMS current as a function of frequency Tangent of loss angle as a function of frequency (typical curve) Axis Title Axis Title 10000 1000 1st line 2nd line 1 μF 10 μF 10 12 μF 20 μF 100 1 1000 1st line 2nd line 6.8 μF 4.7 μF 100 10000 1 000 000 Time Constant 2nd line MΩ x μF (s) 1000 2nd line AC Voltage (V) 10 000 100 000 100 Tamb ≤ 85 °C, UR = 305 VAC 0.1 10 100 1000 10 000 10 100 000 10 10 000 0 20 40 60 80 100 Frequency (Hz) Ambient Temperature (°C) Max. RMS voltage as a function of frequency Insulation resistance as a function of ambient temperature (typical curve) Revision: 25-Jul-2022 Document Number: 26074 5 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents HEAT CONDUCTIVITY (if applicable) DIMENSION (mm) w h l HEAT CONDUCTIVITY (mW/°C) 15.0 25.0 32.0 33 18.0 28.0 32.0 40 21.0 31.0 32.0 46 22.0 38.0 32.0 55 21.5 38.5 42.0 67 30.0 45.0 42.0 90 30.0 45.0 57.5 113 35.0 50.0 57.5 133 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE (if applicable) The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification www.vishay.com/doc?28147. The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G: • ΔT = Tcase - Tambient = case temperature rise (°C) with a maximum of 15 °C at rated temperature • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The case temperature is measured in unloaded (Tamb) and loaded condition (TC). The temperature rise is given by ΔT = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum of 305 VAC rated voltage including fluctuation of the mains. It is recommended to use these components in a mains with maximum nominal voltage of 240 VAC. Higher continuous applied voltages will shorten the life time • For series impedance applications we refer to application note www.vishay.com/doc?28153 • To ensure withstanding high humidity requirements in the application the epoxy adhesion at the leads shall not be damaged. Therefore the leads may not be damaged or not be bent before soldering • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com • These capacitors are not intended for continuous pulse applications. For these situations capacitors of the AC and pulse program must be used • The maximum ambient temperature must not exceed 105 °C • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and divided by the applied voltage Revision: 25-Jul-2022 Document Number: 26074 6 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-4 (2013) and Specific Reference Data”. INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s No visible damage 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.20 Solvent resistance of the marking Isopropyl alcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -40 °C θB = +105 °C 5 cycles Duration t = 30 min Rapid change of temperature 4.6.1 Inspection Visual examination 4.7 Mounting: see section “Mounting” of this specification Procedure B4: Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Vibration Revision: 25-Jul-2022 No visible damage Legible marking No visible damage Document Number: 26074 7 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS 4.7.2 Final inspection Visual examination 4.9 Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Shock 4.9.2 Final measurements PERFORMANCE REQUIREMENTS No visible damage Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C 4.11.3 Damp heat cyclic Test Db First cycle Duration: 16 h 4.11.4 Cold Temperature: -40 °C 4.11.5 Damp heat cyclic Test Db remaining cycles Duration: 2 h 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.11.1 Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Jul-2022 Document Number: 26074 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH, no load 4.12.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination PERFORMANCE REQUIREMENTS No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.12.1. Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2A 4.12A Damp heat steady state with load 85 °C, 85 % RH, load: 305 VAC Duration: 1000 h 4.12.1A Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.12.3A Final measurements Visual examination No visible damage Legible marking Revision: 25-Jul-2022 Capacitance |ΔC/C| ≤ 10 % of the value measured in 4.12.1A. Tangent of loss angle Increase of tan δ: ≤ 0.0240 for: C ≤ 1 μF at 10 kHz > 0.0180 for: C > 1 μF at 1 kHz Compared to values measured in 4.12.1A. Voltage proof 1350 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Document Number: 26074 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kV for C ≤ 1 μF X2: 2.5 kV√C for C > 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 105 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s 4.14.7 Final measurements No self healing, breakdowns, or flash-over Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.13.1 Voltage proof 1350 VDC; 1 min between terminations 2120 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 435 VDC Discharge resistance: 435 V DC R = ----------------------------------------1.25 x C (du/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF or ≤ 0.005 for: C > 1 μF Compared to values measured in 4.15.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Jul-2022 Document Number: 26074 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340X2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: After removing test flame from capacitor, the capacitor must not continue to burn for more than 30 s for V ≤ 1750 mm3 and 10 s for V > 1750 mm3. No burning particle must drop from the sample. SUB-GROUP C6 4.17 Passive flammability Class B for volume > 1750 mm3 Class C for volume ≤ 1750 mm3 V ≤ 250: 5s 250 < V ≤ 500: 10 s 500 < V ≤ 1750: 20 s V > 1750: 60 s One flame application: 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability Revision: 25-Jul-2022 20 cycles of 2.5 kV discharges on the test capacitor connected to URAC The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 26074 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000