F340Y245630MKP2T0

F340Y2 305VAC www.vishay.com Vishay BCcomponents THB Grade IIIB Class Y2 Interference Suppression Film Capacitor Radial MKP 305 VAC - Line Bypass FEATURES • IEC 60384-14: 2013 / AMD1: 2016 grade IIIB certified: 85 °C, 85 % RH, 1000 h at URAC • AEC-Q200 qualified (rev. D) up to 105 °C • High temperature capabilities, up to 125 °C • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS LINKS TO ADDITIONAL RESOURCES For standard line bypass (between line and ground) Y2 applications. See also application note: www.vishay.com/doc?28153 3D 3D 3D Models QUICK REFERENCE DATA Rated capacitance range 0.01 μF to 1 μF (preferred values according to E6) Capacitance tolerance ± 20 %; ± 10 %; ± 5 % (37.5 mm ± 5 % pitch values on request) Climatic testing class according to IEC 60068-1 55 / 105 / 56B Rated DC voltage 1000 VDC at 105 °C 1250 VDC at 85 °C Permissible AC voltage 305 VAC; 50 Hz to 60 Hz Rated temperature 105 °C Maximum permissible temperature 125 °C for limited time Reference standards IEC 60384-14:2013 IEC 60384-14:2013 / AMD1:2016 EN 60384-14 IEC 60065 requires pass. flamm. class B for volume ≥ 1750 mm3 Class C for volume < 1750 mm3 UL 60384-14 (2nd edition) CSA-E60384-1:14 (3rd edition) CQC Dielectric Polypropylene film Electrodes Metallized Series construction Construction Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Leads Tinned wire Marking C-value; tolerance; rated voltage; sub-class; manufacturer’s type; code for dielectric material; manufacturer location, manufacturer's logo, year and week; safety approvals Note • For more detailed data and test requirements, contact rfi@vishay.com Revision: 25-Jul-2022 Document Number: 26066 1 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters l w h lt Ø dt P Notes • Standard dimension • Ø dt ± 10 % of standard diameter specified COMPOSITION OF CATALOG NUMBER CODE MULTIPLIER (nF) Example: 0.1 2 1 3 310 10 4 5 100 P1 (mm) PITCH CODE 15 F 22.5 I 10 nF 0.01 μF 27.5 K 410 100 nF 0.1 μF 37.5 P 510 1000 nF 1.0 μF SPECIAL CODE FOR TERMINAL VOLTAGE 2 2 pins 30 = 305 VAC (#) Customized 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 F 3 4 0 Y 2 4 1 0 3 M F M 2 B 0 0 TOLERANCE CLASS TYPE M ± 20 % K ± 10 % J ± 5% A SPECIAL 0 = Standard Other = Special Special tolerance lt (mm) LEAD LENGTH CODE PITCH (mm) PACKING CODE PACKING STYLE REMARK 3.5 ± 0.3 P ≥ 15 B/T Bulk / loose (1) Not for bent back 5±1 M All R Tape and reel (H: 16.0 mm; 500 mm) For bent back only 25 ± 2 I All H Ammo (H: 16.0 mm) For bent back only W Tape and reel (H: 18.5 mm; 500 mm) Pitch ≤ 22.5 mm G Ammo (H: 18.5 mm) Pitch ≤ 10 mm 0: Space holder Notes • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) Packaging will be bulk for all capacitors with pitch ≤ 15 mm and such with long leads (> 5 mm). Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T” Revision: 25-Jul-2022 Document Number: 26066 2 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) VALUE 305 V 1000 VDC at 105 °C 1250 VDC at 85 °C Permissible DC voltage (URDC) Tangent of loss angle At 1 kHz ≤ 10 x 10-4 Rated voltage pulse slope (du/dt)R at 420 VDC R between leads, for C ≤ 0.33 μF at 100 V; 1 min RC between leads, for C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s Withstanding (AC) voltage between leads and case Rated temperature Maximum permissible temperature Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 At 10 kHz ≤ 20 x 10-4 100 V/μs > 15 000 MΩ > 5000 s > 30 000 MΩ 3400 V; 1 min 2100 V; 1 min 105 °C 125 °C up to 1000 h ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) CAP. (μF) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 DIMENSIONS (4) wxhxl (mm) 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 10.5 x 17.5 x 18.0 305 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 15.5 x 26.5 x 26.5 CATALOG NUMBER F340Y2... AND PACKAGING LOOSE IN BOX TAPED REEL MASS (500 mm) (1)(2) SHORT LEADS LONG LEADS (3) (g) lt = 5.0 mm lt = 25.0 mm H = 18.5 mm; lt = 3.5 mm SPQ SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm P0 = 12.7 mm PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 31030MFP2B0 31030MFM2B0 31030MFI2B0 31030MF02W0 31230MFP2B0 31230MFM2B0 31230MFI2B0 31230MF02W0 1.0 1250 1000 1100 31530MFP2B0 31530MFM2B0 31530MFI2B0 31530MF02W0 31830MFP2B0 31830MFM2B0 31830MFI2B0 31830MF02W0 1.4 32230MFP2B0 32230MFM2B0 1000 32230MFI2B0 1000 32230MF02W0 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 32730MFP2B0 32730MFM2B0 32730MFI2B0 32730MF02W0 1.8 33330MFP2B0 33330MFM2B0 750 33330MFI2B0 500 33330MF02W0 800 33930MFP2B0 33930MFM2B0 33930MFI2B0 33930MF02W0 34730MFP2B0 34730MFM2B0 34730MFI2B0 34730MF02W0 2.4 750 500 650 35630MFP2B0 35630MFM2B0 35630MFI2B0 35630MF02W0 3.0 36830MFP2B0 36830MFM2B0 500 36830MFI2B0 450 36830MF02W0 600 4.5 38230MFP2B0 38230MFM2B0 250 38230MFI2B0 400 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 33330MIP2T0 33330MIM2T0 33330MII2B0 2.4 33930MIP2T0 33930MIM2T0 300 33930MII2B0 250 34730MIP2T0 34730MIM2T0 34730MII2B0 35630MIP2T0 35630MIM2T0 35630MII2B0 2.9 200 250 36830MIP2T0 36830MIM2T0 36830MII2B0 38230MIP2T0 38230MIM2T0 38230MII2B0 3.8 200 250 41030MIP2T0 41030MIM2T0 41030MII2B0 41230MIP2T0 41230MIM2T0 41230MII2B0 6.8 200 200 41530MIP2T0 41530MIM2T0 41530MII2B0 41830MIP2T0 41830MIM2T0 41830MII2B0 7.8 150 200 42230MIP2T0 42230MIM2T0 42230MII2B0 42730MIP2T0 42730MIM2T0 42730MII2B0 14 43330MIP2T0 43330MIM2T0 110 43330MII2B0 275 43930MIP2T0 43930MIM2T0 43930MII2B0 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” Revision: 25-Jul-2022 Document Number: 26066 3 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) 305 CAP. (μF) DIMENSIONS (4) wxhxl (mm) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 20.0 x 35.0 x 31.0 0.47 0.68 1.0 14.5 x 24.5 x 41.5 16.0 x 28.5 x 41.5 18.0 x 32.5 x 41.5 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 9.0 x 19.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 11.0 x 18.5 x 18.0 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 15.5 x 26.5 x 26.5 CATALOG NUMBER F340Y2... AND PACKAGING LOOSE IN BOX TAPED REEL MASS (500 mm) (1)(2) SHORT LEADS LONG LEADS (3) (g) lt = 5.0 mm lt = 25.0 mm H = 18.5 mm; lt = 3.5 mm SPQ SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm P0 = 12.7 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 41030MKP2T0 41030MKM2T0 41030MKI2B0 5.5 100 150 41230MKP2T0 41230MKM2T0 41230MKI2B0 41530MKP2T0 41530MKM2T0 41530MKI2B0 7.4 100 125 41830MKP2T0 41830MKM2T0 41830MKI2B0 42230MKP2T0 42230MKM2T0 42230MKI2B0 9.2 100 125 42730MKP2T0 42730MKM2T0 42730MKI2B0 12.3 43330MKP2T0 43330MKM2T0 100 43330MKI2B0 125 43930MKP2T0 43930MKM2T0 43930MKI2B0 16.1 100 100 44730MKP2T0 44730MKM2T0 44730MKI2B0 45630MKP2T0 45630MKM2T0 45630MKI2B0 20.3 50 75 46830MKP2T0 46830MKM2T0 46830MKI2B0 17.5 48230MKP2T0 48230MKM2T0 50 48230MKI2B0 75 PITCH = 37.5 mm ± 0.5 mm; dt = 1.0 mm ± 0.1 mm; C-TOL. = ± 20 % 15.5 44730MPP2T0 44730MPM2T0 80 44730MPI2T0 80 19.5 46830MPP2T0 46830MPM2T0 70 46830MPI2T0 70 25 51030MPP2T0 51030MPM2T0 60 51030MPI2T0 60 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % 31030KFP2B0 31030KFM2B0 31030KFI2B0 31030KF02W0 31230KFP2B0 31230KFM2B0 31230KFI2B0 31230KF02W0 1.0 1250 1000 1100 31530KFP2B0 31530KFM2B0 31530KFI2B0 31530KF02W0 31830KFP2B0 31830KFM2B0 31830KFI2B0 31830KF02W0 1.4 32230KFP2B0 32230KFM2B0 1000 32230KFI2B0 1000 32230KF02W0 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 32730KFP2B0 32730KFM2B0 32730KFI2B0 32730KF02W0 1.8 750 500 800 33330KFP2B0 33330KFM2B0 33330KFI2B0 33330KF02W0 33930KFP2B0 33930KFM2B0 33930KFI2B0 33930KF02W0 2.4 750 500 650 34730KFP2B0 34730KFM2B0 34730KFI2B0 34730KF02W0 35630KFP2B0 35630KFM2B0 35630KFI2B0 35630KF02W0 3.0 500 450 600 36830KFP2B0 36830KFM2B0 36830KFI2B0 36830KF02W0 4.5 38230KFP2B0 38230KFM2B0 250 38230KFI2B0 400 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 33330KIP2T0 33330KIM2T0 33330KII2B0 2.4 33930KIP2T0 33930KIM2T0 300 33930KII2B0 250 34730KIP2T0 34730KIM2T0 34730KII2B0 2.9 35630KIP2T0 35630KIM2T0 200 35630KII2B0 250 36830KIP2T0 36830KIM2T0 36830KII2B0 3.8 38230KIP2T0 38230KIM2T0 200 38230KII2B0 250 41030KIP2T0 41030KIM2T0 41030KII2B0 6.8 41230KIP2T0 41230KIM2T0 200 41230KII2B0 200 41530KIP2T0 41530KIM2T0 41530KII2B0 7.8 150 200 41830KIP2T0 41830KIM2T0 41830KII2B0 11.0 42230KIP2T0 42230KIM2T0 140 42230KII2B0 200 42730KIP2T0 42730KIM2T0 42730KII2B0 14.0 110 275 43330KIP2T0 43330KIM2T0 43330KII2B0 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” Revision: 25-Jul-2022 Document Number: 26066 4 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) CAP. (μF) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.47 0.56 0.68 0.82 1.0 305 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 DIMENSIONS (4) wxhxl (mm) 9.0 x 19.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 20.0 x 35.0 x 31.0 14.5 x 24.5 x 41.5 16.0 x 28.5 x 41.5 18.0 x 32.5 x 41.5 18.5 x 35.5 x 43.0 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 11.0 x 18.5 x 18.0 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 15.5 x 26.5 x 26.5 CATALOG NUMBER F340Y2... AND PACKAGING LOOSE IN BOX TAPED REEL MASS (500 mm) (1)(2) SHORT LEADS LONG LEADS (3) (g) lt = 5.0 mm lt = 25.0 mm H = 18.5 mm; lt = 3.5 mm SPQ SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm P0 = 12.7 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 41030KKP2T0 41030KKM2T0 41030KKI2B0 5.5 100 150 41230KKP2T0 41230KKM2T0 41230KKI2B0 41530KKP2T0 41530KKM2T0 41530KKI2B0 7.4 100 125 41830KKP2T0 41830KKM2T0 41830KKI2B0 9.2 42230KKP2T0 42230KKM2T0 100 42230KKI2B0 125 12.3 42730KKP2T0 42730KKM2T0 100 42730KKI2B0 125 43330KKP2T0 43330KKM2T0 43330KKI2B0 16.1 100 100 43930KKP2T0 43930KKM2T0 43930KKI2B0 44730KKP2T0 44730KKM2T0 44730KKI2B0 20.3 50 75 45630KKP2T0 45630KKM2T0 45630KKI2B0 17.5 46830KKP2T0 46830KKM2T0 50 46830KKI2B0 75 PITCH = 37.5 mm ± 0.5 mm; dt = 1.0 mm ± 0.1 mm; C-TOL. = ± 10 % 14.8 44730KPP2T0 44730KPM2T0 80 44730KPI2T0 80 19.5 45630KPP2T0 45630KPM2T0 70 45630KPI2T0 70 18.5 46830KPP2T0 46830KPM2T0 70 46830KPI2T0 70 26 48230KPP2T0 48230KPM2T0 60 48230KPI2T0 60 30 51030KPP2T0 51030KPM2T0 105 51030KPI2T0 105 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % 31030JFP2B0 31030JFM2B0 31030JFI2B0 31030JF02W0 1.0 31230JFP2B0 31230JFM2B0 1250 31230JFI2B0 31230JF02W0 1100 31530JFP2B0 31530JFM2B0 31530JFI2B0 1000 31530JF02W0 31830JFP2B0 31830JFM2B0 31830JFI2B0 31830JF02W0 1.4 1000 900 32230JFP2B0 32230JFM2B0 32230JFI2B0 32230JF02W0 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % 32730JFP2B0 32730JFM2B0 32730JFI2B0 32730JF02W0 1.8 750 800 33330JFP2B0 33330JFM2B0 33330JFI2B0 33330JF02W0 500 33930JFP2B0 33930JFM2B0 33930JFI2B0 33930JF02W0 2.4 750 650 34730JFP2B0 34730JFM2B0 34730JFI2B0 34730JF02W0 35630JFP2B0 35630JFM2B0 35630JFI2B0 35630JF02W0 3.0 500 450 600 36830JFP2B0 36830JFM2B0 36830JFI2B0 36830JF02W0 5.5 38230JFP2B0 38230JFM2B0 225 38230JFI2B0 350 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % 33330JIP2T0 33330JIM2T0 33330JII2B0 2.4 300 250 33930JIP2T0 33930JIM2T0 33930JII2B0 34730JIP2T0 34730JIM2T0 34730JII2B0 2.9 200 250 35630JIP2T0 35630JIM2T0 35630JII2B0 36830JIP2T0 36830JIM2T0 36830JII2B0 3.8 200 250 38230JIP2T0 38230JIM2T0 38230JII2B0 41030JIP2T0 41030JIM2T0 41030JII2B0 6.8 200 200 41230JIP2T0 41230JIM2T0 41230JII2B0 41530JIP2T0 41530JIM2T0 41530JII2B0 7.8 150 200 41830JIP2T0 41830JIM2T0 41830JII2B0 8.4 42230JIP2T0 42230JIM2T0 140 42230JII2B0 200 42730JIP2T0 42730JIM2T0 42730JII2B0 14 110 275 43330JIP2T0 43330JIM2T0 43330JII2B0 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” Revision: 25-Jul-2022 Document Number: 26066 5 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION URAC (V) CAP. (μF) DIMENSIONS (4) wxhxl (mm) MASS (g) (3) CATALOG NUMBER F340Y2... AND PACKAGING LOOSE IN BOX TAPED REEL (500 mm) (1)(2) SHORT LEADS LONG LEADS lt = 5.0 mm lt = 25.0 mm H = 18.5 mm; lt = 3.5 mm SPQ SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm P0 = 12.7 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % 0.10 41030JKP2T0 9.0 x 19.0 x 31.0 0.12 0.15 11.0 x 21.0 x 31.0 41030JKM2T0 5.5 41230JKP2T0 41230JKM2T0 41530JKP2T0 41530JKM2T0 7.4 0.18 41030JKI2B0 100 150 41230JKI2B0 41530JKI2B0 100 41830JKP2T0 41830JKM2T0 125 41830JKI2B0 0.22 13.0 x 23.0 x 31.0 9.2 42230JKP2T0 42230JKM2T0 100 42230JKI2B0 125 0.27 15.0 x 25.0 x 31.0 12.3 42730JKP2T0 42730JKM2T0 100 42730JKI2B0 125 43330JKP2T0 43330JKM2T0 18.0 x 28.0 x 31.0 16.1 305 0.33 0.39 0.47 21.0 x 31.0 x 31.0 20.0 x 35.0 x 31.0 44730JKP2T0 44730JKM2T0 20.3 0.56 0.68 43930JKM2T0 17.5 100 43930JKI2B0 44730JKI2B0 50 45630JKP2T0 45630JKM2T0 46830JKP2T0 46830JKM2T0 - 43330JKI2B0 100 43930JKP2T0 - 75 45630JKI2B0 50 46830JKI2B0 75 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to “Packaging Information” 0 (3) Weight for short lead product only (4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” APPROVALS SAFETY APPROVALS Y2 VOLTAGE VALUE FILE NUMBERS LINK EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 (2013)) 305 VAC 1 nF to 1 μF ENEC16/FI/19/10007/A1 www.vishay.com/doc?28253 UL 60384-14 (2nd edition) 305 VAC 1 nF to 1 μF E354331 www.vishay.com/doc?28256 305 VAC 1 nF to 1 μF E354331 www.vishay.com/doc?28256 CQC 305 VAC 1 nF to 1 μF L-15001128762 www.vishay.com/doc?28251 CB-test certificate 305 VAC 1 nF to 1 μF CSA-E60384-1:14 (3rd edition) F-15001128766 www.vishay.com/doc?28252 FI-39833 www.vishay.com/doc?28254 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland, and United Kingdom. Revision: 25-Jul-2022 Document Number: 26066 6 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For original pitch ≤ 15 mm the capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) and height (hmax.) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below. • For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm, and Δh = 0.1 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm, and Δh = 0.1 mm • For products with pitch = 37.5 mm, Δw = Δl = 0.7 mm, and Δh = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + Δw Eccentricity Imax. = I + ΔI CBA116 hmax. = h + Δh Seating plane For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh following • For products with pitch ≤ 10 mm, Δl = 0.3 mm, and Δw = Δh = 0.3 mm • For products with pitch = 15 mm, Δl = 0.5 mm, and Δw = Δh = 0.5 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δl = 1.0 mm, and Δw = Δh = 0.5 mm • For products with pitch = 37.5 mm, Δl = 1.0 mm, and Δw = Δh = 1.0 mm SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 25-Jul-2022 Document Number: 26066 7 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents CHARACTERISTICS Axis Title Axis Title 10000 4 100 10000 ▬▬▬ ▬▬▬ 0 Maximum -2 100 -4 Minimum 10 -6 -50 0 50 ▬▬▬ ▬▬▬ ▬▬▬ 10 100 1 0.01 100 10 0.1 10 100 Frequency (kHz) Capacitance as a function of ambient temperature (typical curve) Tangent of loss angle as a function of frequency (typical curve) Axis Title Axis Title 10000 100 ▬▬▬ ▬▬▬ 1000 1st line 2nd line 1 100 0.1 ▬▬▬ ▬▬▬ ▬▬▬ 10000 10 1000 47 nF 10 nF 4.7 nF 1 nF 10 Y2 100 1 1000 nF 470 nF 100 nF 0.001 100 1000 10 000 10 100 000 0.1 1 10 100 1000 Frequency (kHz) Capacitance (nF) Impedance as a function of frequency (typical curve) Resonant frequency as a function of capacitance (typical curve) Axis Title Axis Title 1000 10000 10000 100 ▬▬▬ 10 ▬▬▬ 1st line 2nd line 1000 100 100 2nd line AC Current (A) ▬▬▬ 0.68 μF 0.82 μF 1 μF 1000 1 0.1 ▬▬▬ ▬▬▬ 0.01 ▬▬▬ ▬▬▬ ▬▬▬ 0.001 ▬▬▬ ▬▬▬ Tamb ≤ 110 °C 10 0.01 10 10 000 10 0.1 1 10 100 1st line 2nd line 0.01 100 1st line 2nd line ▬▬▬ 2nd line Frequency (MHz) ▬▬▬ 2nd line Impedance (I) 1 Ambient Temperature (°C) 1000 2nd line AC Voltage (V) 1000 1st line 2nd line 1000 2nd line Dissipation Factor (x 10-4) Typical 1st line 2nd line 2nd line Change in Capacitance (%) ▬▬▬ 2 0.010 μF 0.047 μF 0.10 μF 0.39 μF 0.82 μF 1 μF 0.0001 0.01 0.010 μF 0.047 μF 0.10 μF 0.27 μF 0.33 μF 0.39 μF 0.47 μF 100 10 0.1 1 10 100 Frequency (kHz) Frequency (kHz) Max. RMS voltage as a function of frequency Max. RMS current as a function of frequency Revision: 25-Jul-2022 Document Number: 26066 8 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents Axis Title 10000 1000 1st line 2nd line Time Constant 2nd line MΩ x μF (s) 1 000 000 100 000 100 10 10 000 0 20 40 60 80 100 Ambient Temperature (°C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES • For Y2 electromagnetic interference suppression in standard line bypass applications (50 Hz / 60 Hz) with a maximum of 305 VAC rated voltage including fluctuation of the mains. It is recommended to use these components in a mains with maximum nominal voltage of 240 VAC. Higher continuous applied voltages will shorten the life time • For series impedance applications we refer to the application note: www.vishay.com/doc?28153 • To ensure withstanding high humidity requirements in the application it is recommended not to damage the epoxy adhesion at the leads. Therefore the leads may not be damaged or bent before soldering • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used • The maximum ambient temperature must not exceed 105 °C • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 VDC and divided by the applied voltage INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data”. INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s Revision: 25-Jul-2022 Document Number: 26066 9 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz 4.20 Solvent resistance of the marking Isopropyl alcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -55 °C θB = +105 °C 5 cycles Duration t = 30 min Rapid change of temperature 4.6.1 Inspection Visual examination 4.7 Mounting: see section “Mounting” of this specification Procedure B4: frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Vibration 4.7.2 Final inspection Visual examination 4.9 Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Shock 4.9.2 Final measurements Revision: 25-Jul-2022 No visible damage Legible marking No visible damage No visible damage Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification Document Number: 26066 10 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C 4.11.3 Damp heat cyclic Test Db First cycle Duration: 16 h 4.11.4 Cold Temperature: -55 °C 4.11.5 Damp heat cyclic Test Db remaining cycles Duration: 2 h 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for C ≤ 1 μF Compared to values measured in 4.11.1 Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH, no load 4.12.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for C ≤ 1 μF Compared to values measured in 4.12.1. Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Jul-2022 Document Number: 26066 11 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C2A 4.12A Damp heat steady state with load RH: 85 %, temp.: 85 °C, load: 305 VAC Duration: 1000 h 4.12.1A Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz 4.12.3A Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % of the value measured in 4.12.1A. Tangent of loss angle Increase of tan δ: ≤ 0.0240 for C ≤ 1 μF at 10 kHz Compared to values measured in 4.12.1A. Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: Y2: 5 kV for C ≤ 1 μF Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.7 x URAC at 105 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for C ≤ 1 μF Compared to values measured in 4.13.1 Voltage proof 2250 VDC; 1 min between terminations 2110 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Jul-2022 No self healing breakdowns or flash-over Document Number: 26066 12 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 420 VDC Discharge resistance: 420 V DC R = -------------------------------------1.5 x C (du/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle: for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 μF Compared to values measured in 4.15.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s (class B) and more than 30 s (class C). No burning particle must drop from the sample. SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B for volume > 1750 mm3 Class C for volume ≤ 1750 mm3 Class B 250 < V ≤ 500: 500 < V ≤ 1750: V > 1750: 60 s One flame application: Class C 10 s 20 s - 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability Revision: 25-Jul-2022 20 cycles of 5 kV discharges on the test capacitor connected to URAC The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 26066 13 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F340Y2 305VAC www.vishay.com Vishay BCcomponents AUTOMOTIVE AEC-Q200, REVISION D QUALIFICATION STRESS REVISION CONDITION SAMPLE SIZE PERFORMANCE REQUIREMENTS 1. High temperature exposure (storage) D Temp.: 105 °C; unpowered 250 h / 500 h / 1000 h 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz Increase of tan δ: ≤ 0.005 for C > 1 μF at 1 kHz IR > 50 % of initial specified value 2. Temperature cycling D Total no. of cycles: 1000 cycles Lower temp.: -55 °C Upper temp: +105 °C 30 min dwell time at each temperature Transition time < 1 min 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz IR > 50 % of initial specified value No. of cycle: 10 cycles t = 24 h/cycle 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz IR > 50% of initial specified value 3. Moisture resistance 4. Biased humidity AC D Temp.: 40 °C; RH: 93 %; URAC 250 h / 500 h / 1000 h 77 |ΔC/C| ≤ 10 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz IR > 50 % of initial specified value 5. Operational life AC D Temp. = 105 °C; URAC 1000 h 77 |ΔC/C| ≤ 10 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz IR > 50 % of initial specified value 6. Terminal strength (leaded) D Test leaded device lead integrity only. - A (pull-test): 2.27 kg (10 s) - C (wire-lead bend test): 227 g (3 x 3 s) 30 No visual damage 7. Resistance to solvents D MIL-STD-202 method 215. - Also aqueous chemical - OKEM clean or equivalent. Do not use banned solvents. 5 No visual damage Legible marking 8. Mechanical shock D 100 g's ; 6 ms half-sine; 3.75 m/s 30 No visual damage 9. Vibration D 5 g's for 20 min 12 cycles x 3 directions 10 Hz to 2000 Hz 30 No visual damage 10. Resistance to soldering heat D Temp.: 280 °C; time: 10 s solder within 1.5 mm of device body 30 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 for C ≤ 1 μF at 10 kHz IR > 50 % of initial specified value 11. Solderability D Leaded: method A at 235 °C, category 3 (245 °C / 3 s) 15 Good tinning as evidence by free flowing of the solder with wetting of terminations > 95 % 12. Electrical characterization - 30 - 13. Flammability One flame application Class B 15 V-0 or V-1 are acceptable. Class B or C according IEC is also acceptable Revision: 25-Jul-2022 Document Number: 26066 14 For technical questions, contact: rfi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000