FCHP
www.vishay.com
Vishay Dale Thin Film
High Frequency 60 GHz High Power 1 W
Thin Film Surface Mount Chip Resistor
FEATURES
•
•
•
•
•
•
•
•
•
•
LINKS TO ADDITIONAL RESOURCES
•
•
•
3D 3D
S-Parameters
3D Models
FCHP series chip resistors are designed with low internal
reactance. They function as almost pure resistors on a very
high range of frequencies. The specialized laser edge
trimming allows for precision tolerances to 0.1 %.
Thin film microwave resistors
Operating frequency to 60 GHz
Available
Small standard case size (0402)
Available
High power (1 W)
Small internal reactance (< 10 m)
Available
Edge sense trimmed block resistors
High thermal conductivity aluminum nitride
Available
substrate
Ohmic range (50 and 100 )
Low TCR (down to ± 25 ppm/°C)
Epoxy bondable, wire bondable, and solderable
termination styles
Modelithics® library available
Flame retardant per AEC-Q200-001
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Aluminum nitride substrate allows for higher power
capability versus standard frequency chip resistor.
APPLICATIONS
Modelithics and Vishay have partnered to offer free access
of highly accurate, scalable advanced simulation models.
Request the Modelithics Vishay model library:
www.modelithics.com/mvp/vishay
•
•
•
•
5G base stations and small cells
RF and microwave test systems
Connected car
Internet of things (IoT)
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
SPECIFICATIONS
TEST CONDITIONS
Passivated nichrome
-
50 / 100
-
± 25 ppm/°C to ± 100 ppm/°C
-55 °C to +125 °C
± 0.1 % to ± 5.0 %
+25 °C
R ± 0.50 %
1000 h at 100 °C
-
-
0.1 ppm/V
-
30 V
-
Operating Temperature Range
-55 °C to +155 °C
-
Storage Temperature Range
-55 °C to +155 °C
-
< -35 dB
-
R ± 0.01 %
1 year at +25 °C
Noise
Shelf Life Stability: Absolute
Revision: 06-Sep-2021
Document Number: 60162
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FCHP
www.vishay.com
Vishay Dale Thin Film
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
1000 (1)
30
50 / 100
0402
Note
(1) Dependent on component mounting by user
DIMENSIONS in inches (millimeters)
D
T
E
L
D
T
W
L
CASE SIZE
0402
LENGTH
WIDTH
W (± 0.005)
THICKNESS
T (± 0.0015)
TOP PAD
D (± 0.005)
BOTTOM PAD
E (± 0.005)
0.042 ± 0.008
(1.067 ± 0.203)
0.022
(0.559)
0.015
(0.381)
0.010
(0.254)
0.010
(0.254)
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Aluminum nitride
Terminations
Lead (Pb)-free Option
Tin/Lead Option
Lead (Pb)-free Finish and Tin / Lead
Revision: 06-Sep-2021
Pre-soldered or gold
100 % matte tin
Tin lead solder
Electroplated
Document Number: 60162
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FCHP
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FCHP0402E1000BSTS
F
C
H
P
0
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
FCHP
0402
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
4
0
2
E
1
RESISTANCE
TOLERANCE
The first 3 digits
are significant
figures and the last
digit specifies the
number of zeros
to follow. “R”
designates the
decimal point.
B = 0.1 %
D = 0.5 %
F = 1 %
G = 2 %
J=5%
Example:
10R0 = 10
1000 = 100
0
0
0
B
TERMINATION
(1, 2, or 3 digits)
S
T
S
PACKAGING
T = top sided Au
(gold) term Au
over Ni epoxy
bond only RoHS-
compliant - e4
B = wraparound
Sn/Pb solder
nickel barrier
G = wraparound
Au over Ni (gold)
termination epoxy
bondable RoHS-
compliant - e4
S = wraparound
lead (Pb)-free
solder RoHS-
compliant - e3
BS = BULK
100 min., 1 mult.
W0 = WAFFLE
100 min., 100 mult.
WS = WAFFLE
100 min., 1 mult.
WI = 100 min., 1 mult.
(item single lot date code)
WP = 100 min., 1 mult.
(package unit single lot
date code)
TAPE AND REEL
T0 = 100 min., 100 mult.
T1 = 1000 min., 1000 mult. (1)
T3 = 300 min., 300 mult.
T5 = 500 min., 500 mult.
TF = full reel
TS = 100 min., 1 mult.
TI = 100 min., 1 mult.
(item single lot date code)
TP = 100 min., 1 mult.
(package unit single lot
date code)
Historical Part Number Example: FCHP0402E1000BST1 (for reference purposes only)
FCHP
0402
E
1000
B
S
T
SERIES
CASE SIZE
TCR
CHARACTERISTIC
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
Note
(1) Preferred packaging code
TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL AND TESTING
C: Internal shunt capacitance
L : Internal inductance
R: Resistance
LC: External connection inductance
Cg: External capacitance to ground
C
LC
R
L
Cg
LC
Cg
Lumped Equivalent Circuit
Reference plane is at the resistor-bonding pad interface.
The lumped circuit above was used to model the data at the bonding pad-resistor reference plane. High frequency testing was
performed by Modelithics, Inc. on parts mounted to quartz test boards. Quartz test boards were chosen to minimize the
contribution of the board effects at high frequencies.
Revision: 06-Sep-2021
Document Number: 60162
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FCHP
www.vishay.com
Vishay Dale Thin Film
INTERNAL IMPEDANCE
VSWR
Axis Title
Axis Title
10000
▬▬▬
▬▬▬
2.0
▬▬▬
▬▬▬
Wraparound, 50 Ω
Wraparound, 100 Ω
Flip chip, 50 Ω
Flip chip, 100 Ω
1.0
2nd line
VSWR
1st line
2nd line
2nd line
|Z|/R
1000
1.5
100
0.5
0
0.01
10
0.1
1
10
10000
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
▬▬▬
▬▬▬
▬▬▬
▬▬▬
1000
100
10
0
100
Wraparound, 50 Ω
Wraparound, 100 Ω
Flip chip, 50 Ω
Flip chip, 100 Ω
1st line
2nd line
2.5
2
4
6
8
SINGLE PULSE LOAD TESTING
6
▬▬▬
10
4
3
100
100
2
Wraparound, 50 Ω
Flip chip, 50 Ω
Wraparound, 100 Ω
Flip chip, 100 Ω
1
0.1
1
10
0
10
0.01
1000
1st line
2nd line
2nd line
Power (W)
1000
0.001
(1)
Wraparound, 50 Ω
Flip chip, 50 Ω
Wraparound, 100 Ω
Flip chip, 100 Ω
5
1st line
2nd line
2nd line
Peak Power (W)
▬▬▬
▬▬▬
100
0.1
0.0001
20
10000
▬▬▬
▬▬▬
18
7
10000
▬▬▬
16
Axis Title
1000
▬▬▬
14
TEMPERATURE VS. APPLIED POWER
Axis Title
▬▬▬
12
Frequency (GHz)
Frequency (GHz)
1
10
70
10
150
200
Temperature (°C)
Pulse Duration (s)
Note
(1) Chip surface temperature measured using FLIR SC645 thermal imaging system.
Thermal imaging and load life testing conducted by mounting device to a 1.6" x 3.7" test card with 3.5 mil copper plating on both sides.
Thermal vias on 50 mil centers were utilized for heat transfer between surfaces
DERATING
Axis Title
10000
100
1000
60
1st line
2nd line
2nd line
Rated Power (%)
80
40
100
20
10
0
0
20
40
60
80
100
125 140 155
Ambient Temperature (°C)
Revision: 06-Sep-2021
Document Number: 60162
4
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000