FES16xT, FESF16xT, FESB16xT
www.vishay.com
Vishay General Semiconductor
Ultrafast Plastic Rectifier
TO-220AC
FEATURES
ITO-220AC
• Power pack
• Glass passivated pellet chip junction
• Ultrafast recovery time
• Low switching losses, high efficiency
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 245 °C (for D2PAK (TO-263AB) package)
1
1
FES16xT Series
FESF16xT Series
PIN 1
PIN 2
• High forward surge capability
2
2
• Solder dip 275 °C max. 10 s, per JESD 22-B106
(for TO-220AC and ITO-220AC package)
PIN 1
CASE
PIN 2
• AEC-Q101 qualified available
D2PAK (TO-263AB)
- Automotive ordering code: base P/NHE3
(for ITO-220AC and D2PAK (TO-263AB package))
K
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2
1
FESB16xT Series
PIN 1
TYPICAL APPLICATIONS
K
PIN 2
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes, DC/DC
converters, and other power switching application.
HEATSINK
DESIGN SUPPORT TOOLS AVAILABLE
3D 3D
MECHANICAL DATA
3D Models
Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,....)
PRIMARY CHARACTERISTICS
IF(AV)
16 A
VRRM
50 V to 600 V
IFSM
250 A
trr
35 ns, 50 ns
VF
0.975 V, 1.30 V, 1.50 V
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
TJ max.
150 °C
Package
TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Circuit configurations
Single
Polarity: as marked
Mounting Torque: 10 in-lbs max.
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
FES
16AT
FES
16BT
FES
16CT
FES
16DT
FES
16FT
FES
16GT
FES
16HT
FES
16JT
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
300
400
500
600
V
Maximum RMS voltage
VRMS
35
70
105
140
210
280
350
420
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
500
600
V
Maximum average forward
rectified current at TC = 100 °C
IF(AV)
16
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
250
A
TJ, TSTG
-65 to +150
°C
VAC
1500
V
Operating storage and temperature range
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
Revision: 28-Jun-2019
Document Number: 88599
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FES16xT, FESF16xT, FESB16xT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward
voltage
16 A
Maximum DC reverse current at
rated DC blocking voltage
SYMBOL
FES
16AT
FES
16BT
VF (1)
TC = 25 °C
FES
16CT
FES
16DT
0.975
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
Typical junction capacitance
4.0 V, 1 MHz
CJ
FES
16GT
FES
16HT
1.30
FES
16JT
V
μA
500
35
UNIT
1.50
10
IR
TC = 100 °C
FES
16FT
50
175
ns
145
pF
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
FES
FESF
FESB
UNIT
RJC
1.2
1.7
1.2
°C/W
Typical thermal resistance, junction to case
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.78
45
50/tube
Tube
TO-220AC
FES16JT-E3/45
ITO-220AC
FESF16JT-E3/45
1.80
45
50/tube
Tube
TO-263AB
FESB16JT-E3/45
1.33
45
50/tube
Tube
TO-263AB
FESB16JT-E3/81
1.33
81
800/reel
Tape and reel
ITO-220AC
FESF16JTHE3_A/P (1)
1.80
P
50/tube
Tube
(1)
1.33
P
50/tube
Tube
1.33
I
800/reel
Tape and reel
TO-263AB
FESB16JTHE3_A/P
TO-263AB
FESB16JTHE3_A/I (1)
Note
AEC-Q101 qualified, available in ITO-220AC and TO-263AB package
(1)
Revision: 28-Jun-2019
Document Number: 88599
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FES16xT, FESF16xT, FESB16xT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
1000
Resistive or Inductive Load
Instantaneous Reverse Leakage
Current (μA)
Average Forward Rectified Current (A)
20
16
12
8
4
0
TJ = 125 °C
100
10
TJ = 100 °C
TJ = 25 °C
1
0.1
0
50
100
150
0
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
300
1000
TJ = TJ max.
8.3 ms Single Half Sine-Wave
(JEDEC Method)
250
Junction Capacitance (pF)
Peak Forward Surge Current (A)
50 V to 200 V
300 V to 400 V
200
150
100
50
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
50 V to 400 V
500 V to 600 V
10
0
1
100
10
0.1
1
10
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
100
Instantaneous Forward Current (A)
100
TJ = 125 °C
10
TJ = 25 °C
1
50 V to 200 V
300 V to 400 V
500 V to 600 V
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Revision: 28-Jun-2019
Document Number: 88599
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FES16xT, FESF16xT, FESB16xT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.635 (16.13)
0.625 (15.87)
1
PIN
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
2
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
PIN 1
CASE
PIN 2
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
ITO-220AC
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.076 (1.93) REF.
45° REF.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.025 (0.64)
0.015 (0.38)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.110 (2.79)
0.100 (2.54)
0.028 (0.71)
0.020 (0.51)
Mounting Pad Layout
0.42 (10.66) min.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) min.
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) min.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 28-Jun-2019
Document Number: 88599
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000