FESF16HT-E3/45

FES16xT, FESF16xT, FESB16xT www.vishay.com Vishay General Semiconductor Ultrafast Plastic Rectifier TO-220AC FEATURES ITO-220AC • Power pack • Glass passivated pellet chip junction • Ultrafast recovery time • Low switching losses, high efficiency • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for D2PAK (TO-263AB) package) 1 1 FES16xT Series FESF16xT Series PIN 1 PIN 2 • High forward surge capability 2 2 • Solder dip 275 °C max. 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) PIN 1 CASE PIN 2 • AEC-Q101 qualified available D2PAK (TO-263AB) - Automotive ordering code: base P/NHE3 (for ITO-220AC and D2PAK (TO-263AB package)) K • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 1 FESB16xT Series PIN 1 TYPICAL APPLICATIONS K PIN 2 For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. HEATSINK DESIGN SUPPORT TOOLS AVAILABLE 3D 3D MECHANICAL DATA 3D Models Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,....) PRIMARY CHARACTERISTICS IF(AV) 16 A VRRM 50 V to 600 V IFSM 250 A trr 35 ns, 50 ns VF 0.975 V, 1.30 V, 1.50 V Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test TJ max. 150 °C Package TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configurations Single Polarity: as marked Mounting Torque: 10 in-lbs max. MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL FES 16AT FES 16BT FES 16CT FES 16DT FES 16FT FES 16GT FES 16HT FES 16JT UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V Maximum average forward rectified current at TC = 100 °C IF(AV) 16 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 250 A TJ, TSTG -65 to +150 °C VAC 1500 V Operating storage and temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Revision: 28-Jun-2019 Document Number: 88599 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FES16xT, FESF16xT, FESB16xT www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 16 A Maximum DC reverse current at rated DC blocking voltage SYMBOL FES 16AT FES 16BT VF (1) TC = 25 °C FES 16CT FES 16DT 0.975 Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ FES 16GT FES 16HT 1.30 FES 16JT V μA 500 35 UNIT 1.50 10 IR TC = 100 °C FES 16FT 50 175 ns 145 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL FES FESF FESB UNIT RJC 1.2 1.7 1.2 °C/W Typical thermal resistance, junction to case ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.78 45 50/tube Tube TO-220AC FES16JT-E3/45 ITO-220AC FESF16JT-E3/45 1.80 45 50/tube Tube TO-263AB FESB16JT-E3/45 1.33 45 50/tube Tube TO-263AB FESB16JT-E3/81 1.33 81 800/reel Tape and reel ITO-220AC FESF16JTHE3_A/P (1) 1.80 P 50/tube Tube (1) 1.33 P 50/tube Tube 1.33 I 800/reel Tape and reel TO-263AB FESB16JTHE3_A/P TO-263AB FESB16JTHE3_A/I (1) Note AEC-Q101 qualified, available in ITO-220AC and TO-263AB package (1) Revision: 28-Jun-2019 Document Number: 88599 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FES16xT, FESF16xT, FESB16xT www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Resistive or Inductive Load Instantaneous Reverse Leakage Current (μA) Average Forward Rectified Current (A) 20 16 12 8 4 0 TJ = 125 °C 100 10 TJ = 100 °C TJ = 25 °C 1 0.1 0 50 100 150 0 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics 300 1000 TJ = TJ max. 8.3 ms Single Half Sine-Wave (JEDEC Method) 250 Junction Capacitance (pF) Peak Forward Surge Current (A) 50 V to 200 V 300 V to 400 V 200 150 100 50 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 50 V to 400 V 500 V to 600 V 10 0 1 100 10 0.1 1 10 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 100 Instantaneous Forward Current (A) 100 TJ = 125 °C 10 TJ = 25 °C 1 50 V to 200 V 300 V to 400 V 500 V to 600 V 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Revision: 28-Jun-2019 Document Number: 88599 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FES16xT, FESF16xT, FESB16xT www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 1 PIN 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) PIN 1 CASE PIN 2 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) ITO-220AC 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) D2PAK (TO-263AB) 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) Mounting Pad Layout 0.42 (10.66) min. 0.055 (1.40) 0.045 (1.14) K 0.33 (8.38) min. 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) min. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 28-Jun-2019 Document Number: 88599 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000