FSOT, FSOT…XX Flat
www.vishay.com
Vishay Huntington
Wirewound Resistors, Industrial Power, Flat
FEATURES
• High temperature silicon coating
• Mounting accommodations ideally suited to
high density packaging
• Self-stacking hardware for horizontal or vertical
placement
• Withstands high vibrations without loosening
• Mounting hardware functions as a heat sink
allowing greater heat dissipation and less
derating of stacked units
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
FSOT10
FSOT10-NI
FSOT15
FSOT15-NI
FSOT20
FSOT20-NI
POWER RATING
P25 °C
W
HISTORICAL MODEL
FSOT-10
10
FSOT-10-NI
FSOT-15
15
FSOT-15-NI
FSOT-20
20
FSOT-20-NI
FSOT30…14 / FSOT30…16
HL-24-09 / HL-24-16
FSOT30…15 / FSOT30…17
NHL-24-09 / NHL-24-16
FSOT40…14 / FSOT40…16
HL-40-09 / HL-40-16
FSOT40…15 / FSOT40…17
NHL-40-09 / NHL-40-16
FSOT55…14 / FSOT55…16
HL-55-09 / HL-55-16
FSOT55…15 / FSOT55…17
NHL-55-09 / NHL-55-16
FSOT70…14 / FSOT70…16
HL-70-09 / HL-70-16
FSOT70…15 / FSOT70…17
NHL-70-09 / NHL-70-16
FSOT95…14 / FSOT95…16
HL-95-09 / HL-95-16
FSOT95…15 / FSOT95…17
NHL-95-09 / NHL-95-16
30
40
55
70
95
RESISTANCE
RANGE
RESISTANCE
RANGE
±5%
± 10 %
1.0 to 15K
0.10 to 15K
1.0 to 1.8K
1.0 to 1.8K
1.0 to 26K
0.10 to 26K
1.0 to 3.6K
1.0 to 3.6K
1.0 to 71K
0.10 to 71K
1.0 to 9.8K
1.0 to 9.8K
1.0 to 11K
0.10 to 11K
1.0 to 1.2K
1.0 to 1.2K
1.0 to 26K
0.10 to 26K
1.0 to 3K
1.0 to 3K
1.0 to 54K
0.10 to 54K
1.0 to 6.8K
1.0 to 6.8K
1.0 to 77K
0.10 to 77K
1.0 to 9.4K
1.0 to 9.4K
1.0 to 99.9K
0.10 to 99.9K
1.0 to12.4K
1.0 to 12.4K
WEIGHT
(typical)
g
0.41
0.47
0.74
20.14
30.07
51.25
60.48
76.51
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
FSOT, FSOT…XX FLAT RESISTOR CHARACTERISTICS
ppm/°C
± 90 for 0.1 to 0.99 ; ± 50 for 1 to 9.9 ; ± 30 for 10 and above
VAC
1000, from terminal to mounting hardware
Short time overload
-
10 x rated power for 5 s
Maximum working voltage
V
(P x R)1/2
Insulation resistance
1000 M minimum dry, 100 M minimum after moisture test
Operating temperature range
°C
-55 to +350
Temperature coefficient
Dielectric withstanding voltage
Revision: 04-Mar-2020
Document Number: 30337
1
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FSOT, FSOT…XX Flat
www.vishay.com
Vishay Huntington
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: FSOT3009E10R00JE14
F
S
O
GLOBAL MODEL
(6 digits)
FSOT30
(see “Standard
Electrical
Specifications”
table above for
additional P/N’s)
T
3
0
0
9
E
1
TERMINAL
DESIGNATION
(2 digits)
TERMINAL
FINISH
(1 digit)
RESISTANCE
VALUE
(5 digits)
09
16
11 (only FSOT10,
FSOT15, FSOT20)
E = lead
(Pb)-free
R = decimal
K = thousand
10R00 = 10.0
1K500 = 1.5 k
0
R
0
0
J
E
1
4
TOLERANCE
PACKAGING CODE
SPECIAL
J = ± 5.0 %
K = ± 10.0 %
E = lead (Pb)-free cell
and bulk pack
(dash number)
(up to 2 digits)
From 1 to 99
as applicable;
leave empty if
11 terminal
NI = non-inductive
(11 terminal only)
14 = standard,
09 terminal
15 = non-inductive,
09 terminal
16 = standard,
16 terminal
17 = non-inductive,
16 terminal
DIMENSIONS in inches [millimeters]
FSOT10 / FSOT15 / FSOT20
Distance center
to center
FSOT...XX FLAT 30 / 40 / 55 / 70 / 95
Distance center
to center
0.126 (3.20) sla. typ.
0.625 (15.88)
0.412 (10.46) max.
0.375 (9.52)
1.188 (30.16) max.
0.594 (15.080)
A
A
0.196 (4.98) dia. typ.
B
B
0.343 (8.71) max.
0.250 (6.35)
0.563 ± 0.030
(14.29 ± 0.794)
0.438 ± 0.030
(11.11 ± 0.794)
C
C
0.218 (5.54) dia. typ.
0.313 (7.94) dia.
MODEL
A
± 0.063
[1.59]
B
± 0.063
[1.59]
C
± 0.031
[0.79]
DISTANCE
CENTER TO CENTER
(ref.)
STANDARD
OPTIONAL
FSOT10
0.750
[19.05]
1.3125
[33.34]
1.000
[25.40]
0.531
[13.49]
11E
-
FSOT15
1.000
[25.40]
1.5625
[39.69]
1.250
[31.75]
0.781
[19.84]
11E
-
FSOT20
2.062
[52.37]
2.625
[66.68]
2.313
[58.75]
1.843
[46.81]
11E
-
FSOT30...XX
1.250
[31.75]
2.500
[63.50]
2.000
[50.80]
0.718
[18.24]
09E
16E
FSOT40...XX
2.000
[50.80]
3.250
[82.55]
2.750
[69.85]
1.468
[37.29]
09E
16E
FSOT55...XX
3.500
[88.90]
4.750
[120.65]
4.250
[107.95]
2.968
[75.39]
09E
16E
FSOT70...XX
4.750
[120.65]
6.000
[152.40]
5.500
[139.70]
4.218
[107.14]
09E
16E
FSOT95...XX
6.000
[152.40]
7.250
[184.15]
6.750
[171.45]
5.468
[138.89]
09E
16E
Revision: 04-Mar-2020
TERMINAL DESIGNATION
Document Number: 30337
2
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FSOT, FSOT…XX Flat
www.vishay.com
Vishay Huntington
TERMINAL DIMENSIONS in inches [millimeters]
STYLE 09, STYLE 11
D
A
D
A
C
STYLE 16
C
B
B
DIMENSION
STYLE 09
STYLE 11
STYLE 16
A
0.188 [4.78]
0.125 [3.18]
0.188 [4.76]
B
0.458 [11.63]
0.255 [6.48]
0.563 [14.29]
C
0.104 [2.64]
0.081 [2.06]
0.050 [1.27]
D
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
POWER RATING
NON-INDUCTIVE
Vishay FSOT flat resistor wattage ratings are based on
mounting horizontally to 10" x 10" x 0.04" [254.0 mm x
254.0 mm x 1.02 mm] steel plate in 25 °C ambient with no
air flow.
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding. For
non-inductive models, maximum resistance values are
lower, see Standard Electrical Specifications table.
EXCLUSIVE BRACKET DESIGN
DERATING
Mounting strap fits snugly through resistor core and is
bound against unit by two eccentric spacers. The bracket
eliminates expensive cements and improves heat transfer
and power handling capabilities.
1000
80
1st line
2nd line
Element: copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Core: ceramic, steatite
Coating: special high temperature silicone
Standard Terminals: model “E” terminals are tinned steel
Terminal Bands: steel
Part Marking: HEI, model, wattage, value, tolerance, date
code
10000
100
2nd line
Rated Power (%)
MATERIAL SPECIFICATIONS
Axis Title
120
60
100
40
20
10
0
-65 -50
TERMINAL FINISH
“E” finish - 100 % Sn coated steel.
0 25 50
150
250
Ambient Temperature (°C)
350
Derating is required for ambient temperatures above 25 °C
per the above graph.
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Thermal shock
Rated power applied until thermally stable, then a minimum of 15 min at -55 °C
± (2.0 % + 0.05 ) R
Short time overload
10 x rated power for 5 s
± (2.0 % + 0.05 ) R
Dielectric withstanding voltage
1000 VRMS, 1 min
± (0.1 % + 0.05 ) R
Low temperature storage
-55 °C for 24 h
± (2.0 % + 0.05 ) R
High temperature exposure
250 h at +350 °C
± (2.0 % + 0.05 ) R
Moisture resistance
MIL-STD-202 method 106, 7b not applicable
± (2.0 % + 0.05 ) R
Shock, specified pulse
MIL-STD-202 method 213, 100 g's for 6 ms, 10 shocks
± (0.2 % + 0.05) R
Vibration, high frequency
Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each
± (0.2 % + 0.05 ) R
Load life
1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF”
± (3.0 % + 0.05 ) R
Revision: 04-Mar-2020
Document Number: 30337
3
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000