GBPC608-E4/51

GBPC6005, GBPC601, GBPC602, GBPC604, GBPC606, GBPC608, GBPC610 www.vishay.com Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES ~ • UL recognition file number E54214 • Ideal for printed circuit boards • Typical IR less than 0.5 μA ~ • High surge current capability • High case dielectric strength 1500 VRMS ~ ~ • Solder dip 275 °C max. 10 s, per JESD 22-B106 Case Style GBPC6 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES TYPICAL APPLICATIONS 3D 3D General purpose use in AC/DC bridge full wave rectification for power supply, home appliances, office equipment, industrial automation applications. 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS Case: GBPC6 IF(AV) 6A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 175 A IR 5 μA VF at IF = 3.0 A 1.0 V TJ max. 150 °C Package GBPC6 Circuit configuration Quad Molding compound meets UL 94 V-0 flammability rating Base P/N-E4 - RoHS-compliant, commercial grade Terminals: silver plated J-STD-002 and JESD22-B102 leads, solderable per Polarity: as marked, positive lead by beveled corner Mounting Torque: 10 cm-kg (8.8 in-lbs) maximum Recommended Torque: 5.7 cm-kg (5 in-lbs) maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL GBPC 6005 GBPC 601 GBPC 602 GBPC 604 GBPC 606 GBPC 608 GBPC 610 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V PARAMETER Maximum average forward rectified output current at TC = 50 °C (1)(2) TA = 40 °C (3) Peak forward surge current single sine-wave  superimposed on rated load Rating for fusing (t = 8.3 ms) Operating junction and storage temperature range IF(AV) 6.0 3.0 A IFSM 175 A I2t 127 A2s TJ, TSTG -55 to +150 °C Notes (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw (2) Unit mounted on 5.5" x 6.0" x 0.11" thick (14 cm x 15 cm x 0.3 cm) aluminum plate (3) Unit mounted on PCB at 0.375" (9.5 mm) lead length with 0.5" x 0.5" (12 mm x 12 mm) copper pads Revision: 09-Jul-2020 Document Number: 88613 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GBPC6005, GBPC601, GBPC602, GBPC604, GBPC606, GBPC608, GBPC610 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum instantaneous forward voltage drop per diode VF Maximum DC reverse current at rated DC blocking voltage per diode IR Typical junction capacitance per diode CJ TEST CONDITIONS GBPC 6005 GBPC 601 GBPC 602 3.0 A GBPC 604 GBPC 606 GBPC 608 GBPC 610 UNIT 1.0 TA = 25 °C 5.0 TA = 125 °C 500 4.0 V, 1 MHz V μA 186 90 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) GBPC 6005 GBPC 601 GBPC 602 GBPC 604 RJA 22 RJC 7.3 GBPC 606 GBPC 608 GBPC 610 UNIT °C/W Notes (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw (2) Unit mounted on 5.5" x 6.0" x 0.11" thick (14 cm x 15 cm x 0.3 cm) aluminum plate (3) Unit mounted on PCB at 0.375" (9.5 mm) lead length with 0.5" x 0.5" (12 mm x 12 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 3.2 51 100 Paper box GBPC606-E4/51 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 8.0 200 6.0 Peak Forward Surge Current (A) Case Temperature, TC Heatsink Mounting 5.5 x 6.0 x 0.11" Thk. (14 x 15 x 0.3 cm) Al. Plate 60 Hz Resistive or Inductive Load 4.0 2.0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length TJ = TJ Max. Single Sine-Wave 175 150 125 100 75 1.0 Cycle 50 0 0 50 100 150 Temperature (°C) Fig. 1 - Derating Curve Output Rectified Current 1 10 100 Number of Cycles at 60 Hz Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Revision: 09-Jul-2020 Document Number: 88613 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GBPC6005, GBPC601, GBPC602, GBPC604, GBPC606, GBPC608, GBPC610 www.vishay.com Vishay General Semiconductor 1000 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.4 100 50 - 400 V 600 - 1000 V 10 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Forward Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 1000 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TA = 125 °C 100 TJ = 100 °C 10 1 TJ = 25 °C 10 1 0.1 0 20 40 60 0.1 0.01 100 80 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Fig. 4 - Typical Reverse Leakage Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style GBPC6 Hole For #6 Screw 0.158 (4.01) DIA. 0.142 (3.61) 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.128 (3.25) 0.048 (1.22) 0.094 (2.4) x 45° 0.040 (1.02) TYP. 0.042 (1.07) DIA. 0.038 (0.96) 0.750 (19.05) MIN. 0.200 (5.08) 0.160 (4.06) Polarity shown on side of case: Positive lead by beveled corner Revision: 09-Jul-2020 Document Number: 88613 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Document Number: 91000 1 For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 01-Jan-2024