GL41M-E3/96

BYM10-xxx, GL41x www.vishay.com Vishay General Semiconductor Surface Mount Glass Passivated Junction Rectifier FEATURES • Superectifier structure for high reliability condition • Ideal for automated placement SUPERECTIFIER ® • Low forward voltage drop • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • AEC-Q101 qualified DO-213AB • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM (BYM10-xxx, GL41x) 50 V to 1000 V, 50 V to 1600 V IFSM 30 A IR 10 μA EAS 5 mJ VF 1.1 V, 1.2 V TJ max. 175 °C Package DO-213AB Diode variations Single die MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER STANDARD RECOVERY DEVICE: 1ST BAND IS WHITE SYMBOL Polarity color bands (2nd band) BYM 10-50 BYM 10-100 BYM 10-200 BYM 10-400 BYM 10-600 BYM 10-800 BYM 10-1000 GL41A GL41B GL41D GL41G GL41J GL41K GL41M GL41T GL41Y Gray Red Orange Yellow Green Blue Violet White Brown 100 200 400 600 800 1000 1300 1600 UNIT Max. repetitive peak reverse voltage VRRM 50 Max. RMS voltage VRMS 35 70 140 280 420 560 700 910 1120 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 1300 1600 V Max. average forward rectified current (fig. 1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave IFSM 30 A Max. full load reverse current full cycle average at TA = 75 °C IR(AV) 30 μA Non-repetitive peak reverse avalanche energy at TJ = 25 °C, IAS = 1 A, L = 10 mH EAS Operating junction and storage temperature range TJ, TSTG Revision: 11-Dec-13 5 - 65 to + 175 V mJ °C Document Number: 88546 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM10-xxx, GL41x www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER Max. instantaneous forward voltage Max. DC reverse current at rated DC blocking voltage Typical junction capacitance 1.0 A SYMBOL BYM 10-50 BYM 10-100 BYM 10-200 BYM 10-400 BYM 10-600 BYM BYM 10-800 10-1000 GL41A GL41B GL41D GL41G GL41J GL41K 1.1 VF UNIT GL41T GL41Y 1.2 TA = 25 °C V 10 IR TA = 125 °C 4.0 V, 1 MHz GL41M μA 50 CJ 8.0 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance BYM 10-50 BYM 10-100 BYM 10-200 BYM 10-400 BYM 10-600 BYM 10-800 BYM 10-1000 GL41A GL41B GL41D GL41G GL41J GL41K GL41M RJA (1) 75 (2) 30 RJT UNIT GL41T GL41Y °C/W Notes (1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE BYM10-600-E3/96 0.114 96 1500 7" diameter plastic tape and reel BYM10-600-E3/97 0.114 97 5000 13" diameter plastic tape and reel GL41J-E3/96 0.114 96 1500 7" diameter plastic tape and reel GL41J-E3/97 0.114 97 5000 13" diameter plastic tape and reel BYM10-600HE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel BYM10-600HE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel GL41JHE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel (1) 0.114 97 5000 13" diameter plastic tape and reel GL41JHE3/97 Note (1) AEC-Q101 qualified Revision: 11-Dec-13 Document Number: 88546 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM10-xxx, GL41x www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 GL41A thru GL41M Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 1.0 0.75 60 Hz Resistive or Inductive Load GL41T thru GL41Y 0.50 0.25 0.1 TJ = 25 °C 0.01 0 25 50 75 100 125 150 0 175 20 40 60 80 Terminal Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 30 25 20 GL41A thru GL41M 15 10 5.0 0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 10 1 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 10 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) Peak Forward Surge Current (A) TJ = 100 °C 1 GL41A thru GL41J GL41K thru GL41Y 1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 ( 10 1 Mounted on 0.20" x 0.27" (5 mm x 7 mm) Copper Pad Areas 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 11-Dec-13 Document Number: 88546 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM10-xxx, GL41x www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends 1st Band Mounting Pad Layout 0 D2 = D1 +- 0.008 (0.20) 0.138 (3.5) MAX. D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Revision: 11-Dec-13 Document Number: 88546 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000