GLL4752-E3/96

GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors Zener Diodes FEATURES • Plastic package has underwriters laboratory flammability classification UL 94 V-0 • For surface mounted applications • Glass passivated chip junction • Low Zener impedance • Low regulation factor • High temperature soldering guaranteed:  250 °C/10 s at terminals • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912  DESIGN SUPPORT TOOLS AVAILABLE 3D 3D 3D Models PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 6.2 to 91 V Test current IZT 2.8 to 41 mA VZ specification Pulse current Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY GLL4735 to GLL4763A GLL4735-E3/97 to GLL4763A-E3/97 5000 (12 mm tape on 13" reel) 5000/box GLL4735 to GLL4763A GLL4735-E3/96 to GLL4763A-E3/96 1500 (12 mm tape on 7" reel) 1500/box PACKAGE PACKAGE NAME WEIGHT MELF (DO-213AB) 116 mg MOLDING COMPOUND MOISTURE SENSITIVITY LEVEL FLAMMABILITY RATING UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction temperature Storage temperature range TEST CONDITION SYMBOL VALUE UNIT Maximum steady state power dissipation is 1 W at TT = 75 °C Ptot 1000 mW RthJA 170 °C/W Tj 150 °C Tstg -65 to +150 °C see table “Characteristics” Rev. 1.8, 06-Mar-2019 Document Number: 85781 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA DC REVERSE LEAKAGE CURRENT IR at VR μA NOM. ZENER CURRENT (2) FORWARD VOLTAGE at 200 mA ZZK at IZT2 IZM VF mApk V MAX. MAX. MAX. MAX. DYNAMIC RESISTANCE f = 1 kHz ZZ at IZT1  V MAX. GLL4735 6.2 41 1 50 3 2 700 730 1.2 GLL4736 6.8 37 1 10 4 3.5 700 660 1.2 GLL4737 7.5 34 0.5 10 5 4 700 605 1.2 GLL4738 8.2 31 0.5 10 6 4.5 700 550 1.2 GLL4739 9.1 28 0.5 10 7 5 700 500 1.2 GLL4740 10 25 0.25 10 7.6 7 700 454 1.2 GLL4741 11 23 0.25 5 8.4 8 700 414 1.2 GLL4742 12 21 0.25 5 9.1 9 700 380 1.2 GLL4743 13 19 0.25 5 9.9 10 700 344 1.2 GLL4744 15 17 0.25 5 11.4 14 700 305 1.2 GLL4745 16 15.5 0.25 5 12.2 16 700 285 1.2 GLL4746 18 14 0.25 5 13.7 20 750 250 1.2 GLL4747 20 12.5 0.25 5 15.2 22 750 225 1.2 GLL4748 22 11.5 0.25 5 16.7 23 750 205 1.2 GLL4749 24 10.5 0.25 5 18.2 25 750 190 1.2 GLL4750 27 9.5 0.25 5 20.6 35 750 170 1.2 GLL4751 30 8.5 0.25 5 22.8 40 1000 150 1.2 GLL4752 33 7.5 0.25 5 25.1 45 1000 135 1.2 GLL4753 36 7 0.25 5 27.4 50 1000 125 1.2 GLL4754 39 6.5 0.25 5 29.7 60 1000 115 1.2 GLL4755 43 6 0.25 5 32.7 70 1500 110 1.2 GLL4756 47 5.5 0.25 5 35.8 80 1500 95 1.2 GLL4757 51 5 0.25 5 38.8 95 1500 90 1.2 GLL4758 56 4.5 0.25 5 42.6 110 2000 80 1.2 GLL4759 62 4 0.25 5 47.1 125 2000 70 1.2 GLL4760 68 3.7 0.25 5 51.7 150 2000 65 1.2 GLL4761 75 3.3 0.25 5 56 175 2000 60 1.2 GLL4762 82 3 0.25 5 62.2 200 3000 55 1.2 GLL4763 91 2.8 0.25 5 69.2 250 3000 50 1.2 Notes (1) Standard voltage tolerance is ± 10 %, suffix A = ± 5 % (2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on I ® ZT per JEDEC method Rev. 1.8, 06-Mar-2019 Document Number: 85781 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors 1.0 1000 60Hz Resistive or Inductive Load ZZ -- Dynamic Zener Impedance (Ω) PM(AV) -- Average Power Dissipation (W) BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0.75 0.5 0.25 P.C.B. Mounted on 0.31 x 0.31 x 0.08 " (8 x 8 x 2 mm) Copper areas pads 0 25 50 18210 75 100 150 125 TJ = 25°C 100 VZ = 30V 10 VZ = 6.2V 1 0.5 175 Terminals Temperature ( °C) VZ = 91V VZ = 56V 500 10 1 Pulse Width = 300 s 1% Duty Cycle TJ = 25°C 0.1 Instantaneous Reverse Current (μA) 10 Instantaneous Forward Current (A) 100 10 Fig. 4 - Typical Zener Impedance Fig. 1 - Maximum Continuous Power Dissipation 1 TJ = 100°C 0.1 TJ = 25°C 0.01 0.01 0.4 0.6 0.8 1 1.2 1.4 0 1.6 18214 Instantaneous Forward Voltage (V) 18211 Fig. 2 - Typical Instantaneous Forward Characteristics for GLL4763 VZ -- Temperature Coefficient (mV/°C) 1 IZT -- Zener Test Current (mA) 18213 20 40 60 80 100 Percent of Rated Zener Voltage (%) Fig. 5 - Typical Reverse Characteristics 110 90 Tested at Rated IZT 70 50 30 10 0 18212 0 10 20 30 40 50 60 70 80 90 100 VZ - Zener Voltage (V) Fig. 3 - Typical Temperature Coefficients Rev. 1.8, 06-Mar-2019 Document Number: 85781 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (plastic) 1st band D1 = 2.67 (0.105) D2 = D1 + 0 - 0.2 (0.008) 2.41 (0.095) 0.56 (0.022) 0.46 (0.018) 5.2 (0.205) 4.7 (0.185) 1st band denotes type and positive end (cathode) Foot print recommendation: 4 (0.157) max. 3 (0.118) min. 1.25 (0.049) min. Document-No.: S8-V-3453.03-001 (4) Created-Date: 13.May.2009 6.5 (0.256) ref. 18268 Rev. 1.8, 06-Mar-2019 Document Number: 85781 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000