GMF05C-GS08

GMF05C Vishay Semiconductors ESD Protection Diode Array Features 6 5 4 1 2 3 VY • Transient protection for data lines as per IEC 61000 - 4 - 2 (ESD) 15 kV (air), 8 kV e3 (contact), IEC 61000 - 4 - 5 (Lightning) 12 A (tp = 8/20 μs) • Small package for use in portable electronics • Bidirectional protection of 4 I/O lines • Unidirectional protection of 5 I/O lines • Low leakage current • Ideal for cellular handsets, cordless phones, notebooks, handhelds and digital cameras • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC CW G M 1 1 18538-2 VY - V = Vishay Y = year, is variable for digit from 0 to 9 (e.g. 4 = 2004, 5 = 2005) CW = Calendar Week, is variable for number from 01 to 52 GM1 = code for GMF05C Mechanical Data Case: SOT-363 Plastic case Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Weight: approx. 6.0 mg Parts Table Part GMF05C Ordering code GMF05C-GS08 Marking GM1 Remarks Tape and Reel Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Symbol Value Unit Peak pulse power Parameter 8/20 μs waveform Test condition Pppm 200 W Peak pulse current 8/20 μs waveform Ipp 12 A Symbol Value Unit Tj - 55 to + 125 °C TSTG - 55 to + 150 °C Thermal Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Operating temperature Storage temperature Document Number 85833 Rev. 1.1, 29-Apr-05 Test condition www.vishay.com 1 GMF05C Vishay Semiconductors Electrical Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Test condition Reverse stand-off voltage Symbol Min Typ. VRWM Reverse breakdown voltage It = 1 mA VBR Max Unit 5 V 6 V Reverse leakage current VRWM = 5 V IR 1 μA Clamping voltage IPP = 1 A, 8/20 μs waveform VC 9.5 V IPP = 12 A, 8/20 μs waveform VC 12.5 V Peak forward voltage IF = 1 A, 8/20 μs waveform VF 150 pF Junction capacitance between I/ VR = 0 V, f = 1 MHz O pins and Gnd 1.5 V Cj Typical Characteristics (Tamb = 25 °C unless otherwise specified) 110 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 10 1 0.1 0.01 0.1 90 80 70 60 50 10 100 30 20 10 1000 td - Pulse Duration (μs) ggmf05c-hs3_01 td = IPP 2 40 0 1.0 Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM 100 0 5 20 25 30 Figure 3. Pulse Waveform 100 20 18 VC - Clamping Voltage (V) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 15 t - Time ( μs) Figure 1. Non -Repetitive Peak Pulse Power vs. Pulse Time 75 50 25 16 14 12 10 8 6 4 2 0 0 25 ggmf05c-hs3_02 50 75 100 125 150 TA - Ambient Temperature (°C) Figure 2. Pulse Derating Curve www.vishay.com 2 10 ggmf05c-hs3_03 175 0 0 ggmf05c-hs3_04 2 4 6 8 10 12 14 IPP - Peak Pulse Current (A) Figure 4. Clamping Voltage vs. Peak Pulse Current Document Number 85833 Rev. 1.1, 29-Apr-05 GMF05C Vishay Semiconductors Package Dimensions in mm (Inches) 1.00 (0.039) 0.80 (0.031) 0.10 (0.004) 0.25 (0.010) 0.10 (0.004) ISO Method E 10 Mounting Pad Layout 2.20 (0.087) 1.80 (0.071) 0.30 (0.012) 0.20 (0.009) 0.90 (0.035) 1.60 (0.063) 2.20 (0.087) 2.00 (0.079) 1.15 (0.045) 1.35 (0.053) 0.35 (0.014) 0.65 (0.026) Ref. 0.65 (0.026) 1.3 (0.052) Document Number 85833 Rev. 1.1, 29-Apr-05 1.30 (0.052) Ref. 14280 www.vishay.com 3 GMF05C Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85833 Rev. 1.1, 29-Apr-05 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1