GP30GE-E3/54

GP30A thru GP30M Vishay General Semiconductor Glass Passivated Junction Plastic Rectifiers FEATURES • Superectifier structure for high reliability condition ® • Cavity-free glass-passivated junction • Low leakage current, typical IR less than 0.1 µA d* e t n e Pat • Low forward voltage drop • High forward surge capability DO-201AD * Glass-plastic encapsulation technique is covered by Patent No. 3,996,602, and brazed-lead assembly by Patent No. 3,930,306 • Meets environmental standard MIL-S-19500 • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high voltage rectification of power supply, inverters, converters, freewheeling diodes and snubber circuit application. PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 50 V to 1000 V IFSM 125 A IR 5.0 µA VF 1.2 V, 1.1 V TJ max. 175 °C MECHANICAL DATA Case: DO-201AD, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GP30A GP30B GP30D GP30G Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage GP30J GP30K GP30M UNIT 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 3.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length at TA = 55 °C IR(AV) 100 µA TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88640 Revision: 03-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GP30A thru GP30M Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage SYMBOL 3.0 A VF Maximum reverse current at rated DC blocking voltage TA = 25 °C TA = 125 °C GP30A GP30B GP30D GP30G 1.2 GP30J GP30K GP30M UNIT 1.1 V IR 5.0 100 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 V, Irr = 0.25 A trr 5.0 µs Typical junction capacitance 4.0 V, 1 MHz CJ 40 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GP30A GP30B GP30D GP30G RθJA RθJL Typical thermal resistance (1) GP30J GP30K GP30M UNIT 20 10 °C/W Note: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GP30J-E3/54 1.28 54 1400 13" diameter paper tape and reel GP30J-E3/73 1.28 73 1000 Ammo pack packaging (1) 1.28 54 1400 13" diameter paper tape and reel GP30JHE3/73 (1) 1.28 73 1000 Ammo pack packaging GP30JHE3/54 Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 4.0 3.0 60 Hz Resistive or Inductive Load 2.0 1.0 0.375" (9.5 mm) Lead Length TJ = TJ Max. 8.3 ms Single Half Sine-Wave 100 10 0 0 25 50 75 100 125 150 175 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88640 Revision: 03-Apr-08 GP30A thru GP30M Vishay General Semiconductor 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 10 1 0.1 0.6 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 0.8 0.7 0.9 1.0 1.1 1.2 1.3 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Leakage Current (µA) 10 TJ = 125 °C 1 TJ = 75 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88640 Revision: 03-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1