H11A1

H11A1 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection FEATURES A 1 6 B C 2 5 C NC 3 4 E • Interfaces with common logic families • Input-output coupling capacitance < 0.5 pF • Industry standard dual-in line 6-pin package • Isolation rated voltage 4420 VRMS • Material categorization:  for definitions of compliance please see www.vishay.com/doc?99912 i179004-3 DESCRIPTION APPLICATIONS The H11Ax family is an industry standard single channel phototransistor coupler. It includes the H11A1, H11A2, H11A3, H11A4, H11A5 couplers. • AC mains detection • Reed relay driving • Switch mode power supply feedback Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. • Telephone ring detection • Logic ground isolation The isolation performance is accomplished through Vishay double molding isolation manufacturing process. Compliance to DIN EN 60747-5-5 partial discharge isolation specification is available is by ordering option 1. • Logic coupling with high frequency noise rejection AGENCY APPROVALS • UL1577, file no. E52744, double protection These isolation processes and the Vishay ISO9001 quality program results in the highest isolation performance available for a commercial plastic phototransistor optocoupler. • cUL tested to CSA 22.2 bulletin 5A • CSA 93751 • BSI EN 60950, BSI EN 60065 The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers. • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • FIMKO • CQC: GB 8898-2011, GB 4943.1-2011 Note • Designing with data sheet is covered in Application Note 45. ORDERING INFORMATION H 1 1 A # - X PART NUMBER 0 0 # PACKAGE OPTION DIP Option 6 7.62 mm 10.16 mm X TAPE AND REEL Option 9 > 0.1 mm AGENCY CERTIFIED/PACKAGE UL, CSA, BSI, FIMKO, CQC DIP-6 CTR (%) > 50 H11A1, H11A1-X001 DIP-6, 400 mil, option 6 H11A1-X006 SMD-6, option 9 H11A1-X009, H11A1-X009T Note • Additional options may be possible, please contact sales office. Rev. 1.8, 02-Feb-18 Document Number: 83730 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA t  10 μs IFSM 2.5 A Pdiss 100 mW Collector emitter breakdown voltage VCEO 70 V Emitter base breakdown voltage VEBO 7 V mA Surge current Power dissipation OUTPUT IC 50 IC 100 mA Pdiss 150 mW Storage temperature range Tstg -55 to +150 °C Operating temperature range Tamb -55 to +100 °C Tj 100 °C Tsld 260 °C Collector current t < 1 ms Power dissipation COUPLER Junction temperature Max. 10 s, dip soldering: distance to seating plane  1.5 mm Soldering temperature Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL IF = 10 mA H11A1 VF MIN. TYP. MAX. UNIT 1.1 1.5 V 10 μA INPUT Forward voltage Reverse current VR = 3 V IR VR = 0 V, f = 1 MHz CO Collector emitter breakdown voltage IC = 1 mA, IF = 0 mA BVCEO 30 V Emitter collector breakdown voltage IE = 100 μA, IF = 0 mA BVECO 7 V Collector base breakdown voltage IC = 10 μA, IF = 0 mA BVCBO 70 Collector emitter leakage current VCE = 10 V, IF = 0 mA ICEO 5 VCE = 0 V CCE 6 ICE = 0.5 mA, IF = 10 mA VCEsat Capacitance 50 pF OUTPUT Emitter collector capacitance V 50 nA pF COUPLER Collector emitter, saturation voltage Capacitance (input-output) 0.4 CIO 0.5 V pF Note • Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER IC/IF TEST CONDITION PART SYMBOL MIN. VCE = 10 V, IF = 10 mA H11A1 CTRDC 50 TYP. MAX. UNIT % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION Turn-on time IC = 2 mA, RL = 100 , VCE = 10 V Turn-off time Rev. 1.8, 02-Feb-18 SYMBOL MIN. TYP. MAX. UNIT ton 3 μs toff 3 μs Document Number: 83730 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 UNIT 55/100/21 Comparative tracking index CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 °C RIO 1012  VIO = 500 V, Tamb = 100 °C RIO 1011  Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 °C 7 mm 7 mm  0.4 mm Maximum rated withstanding isolation voltage t = 1 min Isolation resistance Creepage distance Clearance distance Insulation thickness DTI Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.5 1.3 NCTR - Normalized CTR TA = - 55 °C 1.2 TA = 25 °C 1.1 1.0 0.9 TA = 85 °C 0.8 1 10 NCTR - Normalized CTR TA = 50 °C 0.5 NCTR(SAT) NCTR 0.1 1 1.0 TA = 25 °C 0.5 NCTR(SAT) Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. LED Current Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRCE(sat) VCE = 0.4 V 1.0 TA = 70 °C 0.5 NCTR(SAT) NCTR NCTR 0.0 i4n25_02 1 10 100 IF - LED Current (mA) Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. LED Current Rev. 1.8, 02-Feb-18 100 1.5 Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRCE(sat) = 0.4 V 0 10 IF - LED Current (mA) i4n25_03 Fig. 1 - Forward Voltage vs. Forward Current 1.5 1.0 100 IF - Forward Current (mA) i4n25_01 Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRCE(sat) VCE = 0.4 V 0.0 0.7 0.1 NCTR - Normalized CTR VF -Forward Voltage (V) 1.4 0.0 0.1 i4n25_04 1 10 100 IF - LED Current (mA) Fig. 4 - Normalized Non-Saturated and Saturated CTR vs. LED Current Document Number: 83730 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 www.vishay.com Vishay Semiconductors 1.5 Normalized to: VCE = 10 V, IF = 10 mA, TA = 25 °C CTRCE(sat) VCE = 0.4 V NCTRcb - Normalized CTRcb NCTR - Normalized CTR 1.5 1.0 TA = 85 °C 0.5 NCTR(SAT) NCTR 1 10 100 IF - LED Current (mA) i4n25_05 25 °C 50 °C 70 °C 1 10 100 IF - LED Current (mA) Fig. 8 - Normalized CTRcb vs. LED Current and Temperature 35 10 30 25 50 °C 20 70 °C 15 85 °C 25 °C 10 5 Normalized Photocurrent ICE - Collector Current (mA) 0.5 i4n25_08 Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. LED Current 0 10 20 30 40 50 60 IF - LED Current (mA) i4n25_06 Normalized to: IF = 10 mA, TA = 25 °C 1 0.1 Nib, TA = - 20 °C Nib, TA = 20 °C Nib, TA = 50 °C Nib, TA = 70 °C 0.01 0.1 0 i4n25_09 Fig. 6 - Collector Emitter Current vs. Temperature and LED Current 1 10 100 IF - LED Current (mA) Fig. 9 - Normalized Photocurrent vs. IF and Temperature 105 1.2 70 °C 104 NhFE - Normalized hFE ICEO - Collector Emitter (nA) 1.0 0.0 0.1 0.0 0.1 Normalized to: VCB = 9.3 V, IF = 10 mA, TA = 25 °C 103 102 VCE = 10 V 101 Typical 100 10- 1 10- 2 -20 i4n25_07 25 °C - 20 °C 0.8 Normalized to: IB = 20 µA, VCE = 10 V, TA = 25 °C 0.6 0.4 0 20 40 60 80 100 Tamb- Ambient Temperature (°C) Fig. 7 - Collector Emitter Leakage Current vs. Temperature Rev. 1.8, 02-Feb-18 1.0 1 i4n25_10 10 100 1000 Ib - Base Current (µA) Fig. 10 - Normalized Non-Saturated hFE vs. Base Current and Temperature Document Number: 83730 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 NhFE(sat) - Normalized Saturated hFE www.vishay.com Vishay Semiconductors 1.5 70 °C 50 °C IF Normalized to: VCE = 10 V, Ib = 20 µA TA = 25 °C 1.0 25 °C tD - 20 °C tPLH 0.5 VCE = 0.4 V VTH = 1.5 V tPHL 0.0 1 10 i4n25_11 100 i4n25_13 Ib - Base Current (µA) 1000 VCC = 5 V 2.0 1.5 10 tPLH 0.1 1 10 tPHL - Propagation Delay (µs) tPHL 100 i4n25_12 Fig. 13 - Switching Timing 2.5 IF = 10 mA, TA = 25 °C VCC = 5.0 V, Vth = 1.5 V 1 tF tS 1000 Fig. 11 - Normalized HFE vs. Base Current and Temperature tPLH- Propagation Delay (µs) tR VO 1.0 100 f = 10 kHz DF = 50 % RL VO IF = 10 mA i4n25_14 RL - Collector Load Resistor (kΩ) Fig. 12 - Propagation Delay vs. Collector Load Resistor Rev. 1.8, 02-Feb-18 Fig. 14 - Switching Schematic Document Number: 83730 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3.50 ± 0.30 DIP-6 9.00 max. 8.60 ± 0.10 0.80 min. 3.10 ± 0.50 0.90 min. 7.62 typ. 6.40 ± 0.30 0.85 ± 0.10 0.50 ± 0.10 3° to 9° 0.25 ± 0.10 1.27 ± 0.10 2.54 typ. 6 5 4 1 2 3 Pin 1 I.D. 3.50 ± 0.30 Option 6 9.00 max. 8.60 ± 0.10 7.62 typ. 6.40 ± 0.30 3.40 ± 0.50 0.10 min. 0.90 min. 0.85 ± 0.10 0.50 ± 0.10 1.27 ± 0.10 2.54 typ. 6 5 4 1 2 3 0.25 ± 0.10 10.16 typ. Pin 1 I.D. Rev. 1.8, 02-Feb-18 Document Number: 83730 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 H11A1 www.vishay.com Vishay Semiconductors Option 9 10.05 max. 7.62 typ. 6.40 ± 0.30 9.00 max. 8.60 ± 0.10 3.50 ± 0.30 0.20 ± 0.10 0.90 min. 0.50 min. 1.27 ± 0.10 Leads coplanarity 0.1 max. 8.00 min. 2.54 typ. 5 4 Pin 1 I.D. .25 R0 1.78 2.54 0.76 6 1.52 1 Rev. 1.8, 02-Feb-18 2 3 8.00 min. 11.05 Document Number: 83730 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000