H11AA1-X001

H11AA1 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection FEATURES • AC or polarity insensitive input A/C 1 6 B C/A 2 5 C NC 3 4 E • Built-in reverse polarity input protection • I/O compatible with integrated circuits • Industry standard DIP package • Isolation test voltage: 5300 VRMS • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC V D E 21842-1 i179010-2 APPLICATIONS • Telephone line detection DESCRIPTION • AC line motor The H11AA1 is a bi-directional input optically coupled isolator consisting of two inverse parallel gallium arsenide infrared LEDs coupled to a silicon NPN phototransistor in a 6 pin DIP package. The H11AA1 has a minimum CTR of 20 %, a CTR symmetry of 1:3 and is designed for applications requiring detection or monitoring of AC signals. • PLC • Instrumentation AGENCY APPROVALS • UL1577, file no. E52744 system code H, double protection • CSA 93751 • BSI IEC 60950; IEC 60065 • DIN EN 60747-5-2 (VDE0884)/DIN EN 60747-5-5 (pending), available with option 1 • FIMKO ORDERING INFORMATION H 1 1 A A 1 - PART NUMBER X 0 0 # PACKAGE OPTION DIP-# Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 0.7 mm AGENCY CERTIFIED/PACKAGE > 0.1 mm CTR (%)  20 UL, cUL, BSI, FIMKO DIP-6 H11AA1 DIP-6, 400 mil, option 6 H11AA1-X006 SMD-6, option 7 H11AA1-X007T (1) SMD-6, option 9 H11AA1-X009T (1)  20 VDE, UL, cUL, BSI, FIMKO DIP-6 H11AA1-X001 Note • Additional options may be possible, please contact sales office. (1) Also available in tubes; do not add T to end. Document Number: 83608 Rev. 1.7, 23-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 H11AA1 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT IF ± 60 mA Pdiss 100 mW 1.3 mW/°C INPUT Forward continuous current Power dissipation Derate linearly from 25 °C OUTPUT Power dissipation Pdiss 200 mW 2.6 mW/°C 30 V Derate linearly from 25 °C Collector emitter breakdown voltage BVCEO Emitter base breakdown voltage BVEBO 5 V Collector base breakdown voltage BVCBO 70 V VISO 5300 VRMS COUPLER Between emitter and detector, referred to standard climate 23 °C/50% RH, DIN 50014 Isolation test voltage (RMS) Creepage distance 7 mm Clearance distance 7 mm Comparative tracking index per DIN IEC 112/VDE 0303, part 1 CTI 175 VIO = 500 V, Tamb = 25 °C RIO  1012 VIO = 500 V, Tamb = 100 °C RIO  1011  Storage temperature range Tstg - 55 to + 150 °C Operating temperature range Tamb - 55 to + 100 °C Lead soldering time at 260 °C Tsld 10 s Isolation resistance  Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTCS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = ± 10 mA VF MIN. TYP. MAX. UNIT 1.2 1.5 V INPUT Forward voltage OUTPUT Collector emitter breakdown voltage IC = 1 mA BVCEO 30 V Emitter base breakdown voltage IE = 100 μA BVEBO 5 V Collector base breakdown voltage IC = 100 μA BVCBO 70 V Collector emitter leakage current VCE = 10 V ICEO IF = ± 10 mA, IC = 0.5 mA VCEsat 5 100 nA 0.4 V COUPLER Collector emitter saturation voltage Note • Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER DC current transfer ratio Symmetry (CTR at + 10 mA)/(CTR at - 10 mA) www.vishay.com 2 TEST CONDITION SYMBOL MIN. IF = ± 10 mA, VCE = 10 V CTRDC 20 TYP. 0.33 For technical questions, contact: optocoupleranswers@vishay.com MAX. UNIT % 1 3 Document Number: 83608 Rev. 1.7, 23-Feb-11 H11AA1 Optocoupler, Phototransistor Output, Vishay Semiconductors AC Input, with Base Connection TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.5 IF - LED Forward Current (mA) 60 Normalized to: VCE = 10 V, IF = 10 mA TA = 70 °C CTRce(sat) VCE = 0.4 V NCTR - Normalized 40 85 °C 20 25 °C 0 - 55 °C - 20 1.0 0.5 NCTR(SAT) - 40 NCTR - 60 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 VF - LED Forward Voltage (V) ih11aa1_01 0.0 0.1 Fig. 1 - LED Forward Current vs.Forward Voltage 100 1.5 Normalized to: VCE = 10 V, IF = 10 mA TA = 85 °C CTRce(sat) VCE = 0.4 V VCE = 10 V, IF = 10 mA TA = 25 °C 1.0 CTRce(sat) VCE = 0.4 V 0.5 NCTR(SAT) NCTR 0.0 0.1 ih11aa1_02 1 10 NCTR - Normalized CTR Normalized to: 100 IF - LED Current (mA) 1.0 0.5 NCTR(SAT) NCTR 0.0 0.1 1 Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. LED Current 10 100 IF - LED Current (mA) ih11aa1_05 Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. LED Current 35 1.5 Normalized to: VCE = 10 V, IF = 10 mA TA = 50 °C CTRce(sat) VCE = 0.4 V 1.0 0.5 NCTR(SAT) NCTR 0.0 ICE - Collector Current (mA) NCTR - Normalized CTR 10 Fig. 4 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.5 NCTR - Normalized CTR 1 IF - LED Current (mA) ih11aa1_04 30 25 50 °C 20 70 °C 25 °C 15 100 °C 10 5 0 0.1 ih11aa1_03 1 10 100 IF - LED Current (mA) Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. LED Current Document Number: 83608 Rev. 1.7, 23-Feb-11 0 ih11aa1_06 10 20 30 40 50 60 IF - LED Current (mA) Fig. 6 - Collector Emitter Current vs. Temperature and LED Current For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 H11AA1 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection 10 ICEO - Collector Emitter (nA) 105 103 102 VCE = 10 V 101 TYPICAL 100 10-1 10-2 - 20 0 20 40 60 80 IF = 10 mA 1 0.1 Fig. 7 - Collector Emitter Leakage Current vs. Temperature 10 100 Fig. 10 - Normalized Photocurrent vs. LED Current 2.0 70 °C Normalized to: IF = 10 mA 50 °C NhFE(sat) - Normalized Saturated hFE NCTRcb - Normalized CTRcb 1 IF - LED Current (mA) ih11aa1_10 1.5 VCB = 9.3 V 1.0 0.5 25 °C 50 °C 70 °C 1.5 25 °C Normalized to: Ib = 20 µA VCE = 10 V 1.0 VCE = 0.4 V 0.5 0.0 0.0 0.1 1 10 1 100 10 ih11aa1_11 IF - LED Current (mA) ih11aa1_08 Fig. 8 - Normalized CTRcb vs. LED Current and Temperature 100 1000 Ib - Base Current (µA) Fig. 11 - Normalized Saturated hFE vs. Base Current and Temperature 1.5 1000 100 ICB = 1.0357 x IF ^ 1.3631 NhFE(sat) Normalized Saturated hFE Icb - Collector Base Photocurrent (µA) NIB - Ta = - 20 °C NIb, Ta = 25 °C NIb, Ta = 50 °C NIb, Ta = 70 °C 0.01 0.1 100 Tamb - Ambient Temperature (°C) ih11aa1_07 Normalized to: Normalized Photocurrent 104 10 1 0.1 70 °C 50 °C 1.0 Normalized to: VCE = 10 V IB = 20 µA - 25 °C - 20 °C 0.5 VCE = 0.4 V 0.0 0.01 0.1 ih11aa1_09 1 10 100 IF - LED Current (mA) Fig. 9 - Collector Base Photocurrent vs. LED Current www.vishay.com 4 1 ih11aa1_12 10 100 1000 Ib - Base Current (µA) Fig. 12 - Normalized Saturated hFE vs. Base Current and Temperature For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83608 Rev. 1.7, 23-Feb-11 H11AA1 Optocoupler, Phototransistor Output, Vishay Semiconductors AC Input, with Base Connection 2.5 IF = 10 mA VCC = 5 V, VTH = 1.5 V tPHL 100 2.0 1.5 10 tPLH 1.0 100 1 0.1 ih11aa1_13 1 tpHL - Propagation Delay (µs) tp - Propagation Delay (µs) 1000 10 RL - Collector Load Resistor (kΩ) Fig. 13 - Propagation Delay vs. Collector Load Resistor IF tD tR VO tPLH VTH = 1.5 V tF tS tPHL ih11aa1_14 Fig. 14 - Switching Waveform VCC = 5 V F = 10 kHz, DF = 50 % RL VO IF = 10 mA ih11aa1_15 Fig. 15 - Switching Schematic Document Number: 83608 Rev. 1.7, 23-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 H11AA1 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection PACKAGE DIMENSIONS in millimeters 3 2 1 4 5 6 Pin one ID 6.4 ± 0.1 ISO method A 8.6 ± 0.1 7.62 typ. 1.2 ± 0.1 1 min. 3.555 ± 0.255 18° 4° typ. 2.95 ± 0.5 0.8 min. 0.85 ± 0.05 0.5 ± 0.05 0.25 typ. 3° to 9° 7.62 to 8.81 i178004 2.54 typ. Option 6 Option 7 Option 9 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 0.7 min. 3.5 ± 0.3 4.3 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 8 min. 2.55 ± 0.25 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 0.76 R 0.25 2.54 0.76 R 0.25 2.54 1.78 8 min. 11.05 20802-24 1.52 1.78 8 min. 11.05 1.52 PACKAGE MARKING H11AA1 V YWW H 68 21764-106 Notes • Only options 1 and 7 are reflected in the package marking. • The VDE Logo is only marked on option1 parts. • Tape and reel suffix (T) is not part of the package marking. www.vishay.com 6 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83608 Rev. 1.7, 23-Feb-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000