HV1825Y103KXHARHV

HV High Voltage Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications FEATURES • High voltage breakdown compared to standard design • High reliability serial electrode design • Polymer termination available for intensive, board flex requirements • Protective surface coating may be required to prevent surface arcing • Excellent reliability and thermal shock performance • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • Input filter capacitors Output filter capacitors Snubber capacitors reduce MOSFET voltage spikes Filtering for switching power supplies For lighting and other AC applications please contact: mlcc@vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R   GENERAL SPECIFICATION GENERAL SPECIFICATION Note  Electrical characteristics at +25 °C unless otherwise specified Note  Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Operating Temperature: -55 °C to +125 °C Capacitance Range: 10 pF to 3.3 nF Capacitance Range: 47 pF to 560 nF Voltage Range: 500 VDC to 5000 VDC Voltage Range: 500 VDC to 8000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for value  1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Aging Rate: 0 % maximum per decade Dielectric Strength Test: applied test voltages 120 % of rated voltage Revision: 15-Jul-2021 Dielectric Strength Test: applied test voltages min. 120 % of rated voltage  Document Number: 45228 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 1206 1500 10 pF 120 pF 1210 2000 10 pF 120 pF 1808 3000 27 pF 220 pF 1812 5000 15 pF 1.8 nF 1825 5000 15 pF 2.2 nF 2220 5000 33 pF 2.2 nF 2225 5000 47 pF 3.3 nF 1206 2000 270 pF 4.7 nF 1210 2000 390 pF 10 nF 1808 6000 47 pF 18 nF 1812 6000 150 pF 27 nF 1825 6000 330 pF 56 nF 2220 6000 330 pF 82 nF 2225 6000 470 pF 100 nF 3040 1500 33 nF 220 nF 3640 8000 470 pF 390 nF 4044 1500 100 nF 560 nF C0G (NP0) X7R Note • Detail ratings see “Selection Chart” • For special high voltage applications including Open Mode Design and ArcGuard please consult series datasheet ORDERING INFORMATION HV2220 Y 152 K X M A T HV (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 1206 1210 1808 1812 1825 2220 2225 3040 3640 4044 Y = X7R A = C0G (NP0) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples 152 = 1500 pF C0G (NP0): F=±1% G=± 2% J=±5% K = ± 10 % X = Ni barrier 100 % tin plated matte finish B = polymer 100 % tin plated matte finish E = 500 V L = 630 V G = 1000 V R = 1500 V F = 2000 V H = 3000 V V = 4000 V M = 5000 V 6 = 6000 V 8 = 8000 V A= unmarked X7R: J=±5% K = ± 10 % M = ± 20 % HV = high voltage T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Process code with 2 digits has to be added ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT X Ni barrier 100 % tin plated matte finish Yes Yes B Polymer layer, 100 % tin plated matte finish Yes Yes Revision: 15-Jul-2021 VISHAY GREEN Document Number: 45228 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION PAD (P) STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 1206 HV1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1210 HV1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1808 HV1808 0.180 ± 0.012 (4.57 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1812 HV1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.106 (2.70) 0.010 (0.25) 0.035 (0.90) 1825 HV1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.035 (0.90) 2220 HV2220 0.220 ± 0.010 (5.59 ± 0.25) 0.200 ± 0.010 (5.08 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.037 (0.95) 2225 HV2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.037 (0.95) 3040 HV3040 0.300 ± 0.015 (7.62 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.100 (2.54) 0.010 (0.25) 0.039 (1.00) 3640 HV3640 0.360 ± 0.015 (9.14 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.130 (3.30) 0.010 (0.25) 0.037 (0.95) 4044 HV4044 0.400 ± 0.015 (10.16 ± 0.38) 0.440 ± 0.015 (11.17 ± 0.38) 0.120 (3.05) 0.020 (0.50) 0.040 (1.00) CASE CODE Note • Polymer layer (B termination) have increased dimensions: length 0.006" (0.15 mm) Revision: 15-Jul-2021 Document Number: 45228 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE HV1206 EIA CODE (1) 1206 HV1210 (1) HV1808 (1) 1210 1808 VOLTAGE (VDC) 500 630 1000 1500 500 630 1000 1500 2000 500 630 1000 2000 3000 VOLTAGE CODE E L G R E L G R F E L G F H CAP. CODE CAP. 100 10 pF • • • • • • • • • 120 12 pF • • • • • • • • • 150 15 pF • • • • • • • • • 180 18 pF • • • • • • • • • 220 22 pF • • • • • • • • • 270 27 pF • • • • • • • • • • • • • • 330 33 pF • • • • • • • • • • • • • • 390 39 pF • • • • • • • • • • • • • 470 47 pF • • • • • • • • • • • • • 560 56 pF • • • • • • • • • • • • • 680 68 pF • • • • • • • • • • • • • 820 82 pF • • • • • • • • • • • • • 101 100 pF • • • • • • • • • • • • • 121 120 pF • • • • • • • • • • • • 151 150 pF • • • • 181 180 pF • • • • 221 220 pF • • • • 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE HV1812 EIA CODE VOLTAGE (VDC) CAP. 100 10 pF HV1825 (1) HV2220 (1) HV2225 (1) 1825 2220 2225 1812 500 630 1000 2000 3000 4000 5000 500 630 1000 3000 4000 5000 3000 4000 5000 3000 4000 5000 VOLTAGE CODE CAP. CODE (1) E L G F H V M E L G H V M H V M H V M 120 12 pF 150 15 pF • • • • • • • • • • 180 18 pF • • • • • • • • • • 220 22 pF • • • • • • • • • • 270 27 pF • • • • • • • • • • 330 33 pF • • • • • • • • • • • • • • • • 390 39 pF • • • • • • • • • • • • • • • • 470 47 pF • • • • • • • • • • • • • • • • • • • 560 56 pF • • • • • • • • • • • • • • • • • • • 680 68 pF • • • • • • • • • • • • • • • • • • • 820 82 pF • • • • • • • • • • • • • • • • • • • 101 100 pF • • • • • • • • • • • • • • • • • • • 121 120 pF • • • • • • • • • • • • • • • • • • • 151 150 pF • • • • • • • • • • • • • • • • • • • 181 180 pF • • • • • • • • • • • • • • • • • • • 221 220 pF • • • • • • • • • • • • • • • • • • • 271 270 pF • • • • • • • • • • • • • • • • • • 331 330 pF • • • • • • • • • • • • • • • • • 391 390 pF • • • • • • • • • • • • • • • • • 471 470 pF • • • • • • • • • • • • • • • • • 561 560 pF • • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • • • • 821 820 pF • • • • • • • • • • • • • 102 1.0 nF • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • 152 1.5 nF • • • • • • • • • 182 1.8 nF • • • • • • • • • 222 2.2 nF • • • • • 272 2.7 nF • 332 3.3 nF • 392 3.9 nF 472 4.7 nF • Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE HV1206 EIA CODE (1) HV1210 1206 VOLTAGE (VDC) (1) HV1808 (1) 1210 1808 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 3000 6000 VOLTAGE CODE E E L G R F H 6 47 pF • • • • • • • 56 pF • • • • • • • 68 pF • • • • • • • 820 82 pF • • • • • • • 101 100 pF • • • • • • • 121 120 pF • • • • • • • 151 150 pF • • • • • • • 181 180 pF • • • • • • • 221 220 pF • • • • • • • 271 270 pF • • • • • • • • • • • • 331 330 pF • • • • • • • • • • • • 391 390 pF • • • • • • • • • • • • • • • • 471 470 pF • • • • • • • • • • • • • • • • 561 560 pF • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • • • • • 751 750 pF 821 820 pF • • • • • • • • • • • • • • • • 102 1.0 nF • • • • • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • • • • • • • 152 1.5 nF • • • • • • • • • • • • • • • 182 1.8 nF • • • • • • • • • • • • • • 222 2.2 nF • • • • • • • • • • • • • 272 2.7 nF • • • • • • • • • • • • • 332 3.3 nF • • • • • • • • • • • • • 392 3.9 nF • • • • • • • • • • • 472 4.7 nF • • • • • • • • • • • 562 5.6 nF • • • • • • • 682 6.8 nF • • • • • • • 822 8.2 nF • • • • • 103 10 nF • • • • • 123 12 nF • • • 153 15 nF • • • 183 18 nF • • • CAP. CODE CAP. 470 560 680 L G R F E L G R F Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE HV1812 EIA CODE (1) HV1825 (1) 1812 VOLTAGE (VDC) 1825 500 630 1000 1500 2000 3000 4000 5000 6000 500 630 1000 1500 2000 3000 4000 5000 6000 VOLTAGE CODE E L G R F H V M 6 E L G R F H V M 150 pF • • • • • • • • • 180 pF • • • • • • • • • 221 220 pF • • • • • • • • • 271 270 pF • • • • • • • • • 331 330 pF • • • • • • • • 391 390 pF • • • • • • • • • • • • • • • • • • • • • • • • • • 471 470 pF • • • • • • • 561 560 pF • • • • • • • • • • • • • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • • • • • • • 751 750 pF • • • • • • • • • • 821 820 pF • • • • 102 1.0 nF • • • • • • • • • • • • • • • • • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • • • • • • • • 152 1.5 nF • • • • • • • • (2) • • • • • • • • • 182 1.8 nF • 222 2.2 nF • • • • • • • • • • • • • • • • • • • • • • • • • • 272 2.7 nF • • • • • • (2) 332 • • • • • • • 3.3 nF • • • • • • (2) • • • • • • • 392 3.9 nF • • • • • • (2) • • • • • • 472 4.7 nF • • • • • • • • • • • 562 5.6 nF • • • • • • • • • • • (2) 682 6.8 nF • • • • • • • • • • • (2) 822 8.2 nF • • • • • • • • • • (2) 103 10 nF • • • • • • • • • • (2) 123 12 nF • • • • • • • • • 153 15 nF • • • • • • • • • 183 18 nF • • • • • • • • • 223 22 nF • • • • • • • • 273 27 nF • • • • • • • • 333 33 nF • • • • 393 39 nF • • • • 473 47 nF • • • 563 56 nF • • • 683 68 nF 823 82 nF CAP. CODE CAP. 101 100 pF 121 120 pF 151 181 6 Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE HV2220 EIA CODE (1) HV2225 (1) 2220 VOLTAGE (VDC) 500 630 1000 1500 2000 3000 4000 5000 VOLTAGE CODE CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 2225 E L G R F H V M 6000 500 630 1000 1500 2000 3000 4000 5000 6000 6 E L G R F H V M 6 391 390 pF • • • • • • • • 471 470 pF • • • • • • • • • • • • • • • • • • 561 560 pF • • • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • • • • • • • 751 750 pF • • • • • • • • • • • • • • • • • • 821 820 pF • • • • • • • • • • • • • • • • • • 102 1.0 nF • • • • • • • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • • • • • • • • • • 152 1.5 nF • • • • • • • • • • • • • • • • • • 182 1.8 nF • • • • • • • • • • • • • • • • • • 222 2.2 nF • • • • • • • • • • • • • • • • • • 272 2.7 nF • • • • • • • • • • • • • • • • 332 3.3 nF • • • • • • • • • • • • • • • 392 3.9 nF • • • • • • • • • • • • • 472 4.7 nF • • • • • • • • • • • • • (2) • 562 5.6 nF • • • • • • • • • • • • 682 6.8 nF • • • • • • (2) • • • • • • 822 8.2 nF • • • • • • (2) • • • • • • 103 10 nF • • • • • • (2) • • • • • • 123 12 nF • • • • • • • • • • • 153 15 nF • • • • • • • • • • • 183 18 nF • • • • • • • • • • 223 22 nF • • • • • • • • • • 273 27 nF • • • • • • • • • • 333 33 nF • • • • • • • • 393 39 nF • • • • • • • • 473 47 nF • • • • • • • • 563 56 nF • • • • • • • 683 68 nF • • • • • • • 823 82 nF • • • • • • 104 100 nF • • • Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R HV3040 (1) STYLE EIA CODE HV3640 (1) 3040 HV4044 (1) 3640 4044 VOLTAGE (VDC) 500 630 1000 1500 500 630 1000 1500 6000 8000 500 630 1000 1500 VOLTAGE CODE E L G R E L G R 6 8 E L G R • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF • • • • 561 560 pF • • • • 681 680 pF • • • • 751 750 pF • • • • 821 820 pF • • • • 102 1.0 nF • • • • 122 1.2 nF • • • • 152 1.5 nF • • • • 182 1.8 nF • • • • 222 2.2 nF • • • • 272 2.7 nF • • • • 332 3.3 nF • • • • 392 3.9 nF • • • • 472 4.7 nF • • • • 562 5.6 nF • • • • 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF • • • • 393 39 nF • • • • 473 47 nF • • • • • • • • 563 56 nF • • • • • • • • 683 68 nF • • • • • • • • 823 82 nF • • • • • • • • 104 100 nF • • • • • • • • 124 120 nF • • • • • • • • 154 150 nF • • • • • • • 184 180 nF • • • • • • • 224 220 nF • • • • • • • 274 270 nF • • • • 334 330 nF • • • 394 390 nF • • 474 470 nF 564 560 nF Notes (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 (2) Rating use lower packaging quantity, see “Standard Packaging Quantities” chart Revision: 15-Jul-2021 Document Number: 45228 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Minimum Insulation Resistance vs. Temperature 10000 10 000 10000 2.0 0 NP0 -0.5 100 -1.0 1000 1000 100 100 1st line 2nd line 1000 0.5 2nd line Insulation Resistance (ΩF) 1.0 1st line 2nd line 2nd line Capacitance Change (%) 1.5 -1.5 -2.0 -100 0 50 100 10 10 10 -50 10 150 30 50 70 90 110 130 150 Temperature (°C) Temperature (°C) Aging Rate Voltage Coefficient of Capacitance 0.2 10000 10000 30 100 -0.1 1000 10 1st line 2nd line 0 2nd line Capacitance Change (%) 1000 1st line 2nd line 2nd line Capacitance Change (%) 20 0.1 0 100 -10 -20 -0.2 1 10 100 Hours Revision: 15-Jul-2021 1000 10 10 000 -30 0 1000 2000 3000 4000 10 5000 Applied DC Voltage (VDC) Document Number: 45228 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Impedance / ESR vs. Frequency (HV1812Y152KXVATHV) 1000 10000 Impedance / ESR vs. Frequency (HV1825Y182KXMATHV) 10000 100 100 1 1000 10 |Z| ESR 1 100 ESR 0.1 1 10 100 1000 0.1 10 10 000 1 10 100 1000 10 10 000 Frequency (MHz) Frequency (MHz) Aging Rate Impedance / ESR vs. Frequency (HV1825Y103KXHATHV) 100 10000 10000 1 0 10 1st line 2nd line -1 -2 100 1000 |Z| 1st line 2nd line 1000 2nd line ESR / |Z| (Ω) 2nd line Capacitance Change (%) 1st line 2nd line |Z| 10 2nd line ESR / |Z| (Ω) 1000 1st line 2nd line 2nd line ESR / |Z| (Ω) 100 1 ESR 100 0.1 -3 -4 1 10 100 1000 0.01 10 10 000 1 10 1000 10 10 000 Frequency (MHz) Hours Impedance / ESR vs. Frequency (HV1812Y181KXMATHV) 1000 10000 Impedance / ESR vs. Frequency (HV2220Y103KXHATHV) 100 10000 10 |Z| 10 ESR 100 1 1000 |Z| 1st line 2nd line 1st line 2nd line 1000 2nd line ESR / |Z| (Ω) 100 2nd line ESR / |Z| (Ω) 100 1 ESR 100 0.1 0.1 1 10 100 Frequency (MHz) Revision: 15-Jul-2021 1000 10 10 000 0.01 1 10 100 1000 10 10 000 Frequency (MHz) Document Number: 45228 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Voltage Coefficient of Capacitance 10000 1808, 330 pF, 6000 V 1808, 470 pF, 6000 V 1812, 750 pF, 6000 V 1825, 1800 pF, 6000 V 2220, 2200 pF, 6000 V 3640, 5600 pF, 6000 V 3640, 3900 pF, 8000 V 2nd line Capacitance Change (%) 0 -10 -20 1000 1st line 2nd line 10 -30 -40 100 -50 -60 10 6000 -70 0 1000 2000 3000 4000 5000 DC Bias Voltage (VDC) POLYMER TERMINATION Polymer termination provides additional protection against board flexure damage by absorbing greater mechanical and thermal stresses. Components can be packaged, transported, stored and handled the same standard terminated product. Reflow soldering of MLCC does not require modification to equipment and / or process. Polymer termination greatly reduces the risk of mechanical cracking however it does not completely eliminate. STANDARD TERMINATION OMD CAP PLUS POLYMER TERMINATION Exposed Electrodes = Electrical Short No Exposed Electrodes = No Electrical Short STANDARD PACKAGING QUANTITIES (1) 7" REEL QUANTITIES PACKAGING CODE “T” 11 1/4" AND 13" REEL QUANTITIES PACKAGING CODE “R” 8 mm 2500 / 3000 9000 / 10 000 8 mm 2000 / 2500 / 3000 9000 / 10 000 12 mm 2000 10 000 (2) CASE CODE TAPE SIZE 1206 1210 1808 1812 12 mm 500 / 1000 4000 1825 12 mm 500 (2) / 1000 4000 2220 12 mm 500 (2) / 1000 n/a 2225 12 mm 500 n/a 3040 16 mm 500 n/a 3640 16 mm 500 n/a 4044 24 mm 300 n/a Notes (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (2) Lower quantity for certain ratings, see “Selection Chart” Revision: 15-Jul-2021 Document Number: 45228 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment.  Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 15-Jul-2021 Document Number: 45228 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000