IHA101BA

IHA www.vishay.com Vishay Dale Filter Inductors, High Current, Axial Leaded FEATURES • • • • Printed circuit mounting (axial leads) Pre-tinned leads Low cost construction Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/8, class 3 requirements • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS ELECTRICAL SPECIFICATIONS Noise filtering for switching regulators, power amplifiers, power supplies, and SCR and triac control circuits Inductance: Measured at 1.0 V with zero DC current Current Rating: Maximum continuous operating current (DC or RMS) based on 50 °C temperature rise Dielectric Rating: 2500 VRMS, 60 Hz, applied for one minute between winding and outer circumference to within 0.250" [6.35 mm] of the insulation sleeve edge Operating Temperature: - 55 °C to + 125 °C (no load), - 55 °C to + 75 °C (at full rated current) MECHANICAL SPECIFICATIONS Winding: Layered solenoid type Wire: Solid soft copper Terminals: Tinned copper leads Encapsulant: Polyolefin tubing Core Material: Ferrite DIMENSIONS in inches [millimeters] 1.25 [31.75] Min. Typ. B Max. 0.125 [3.18] C Typ. A Max. Schematic MODEL IHA-101 IHA-102 IHA-103 IHA-104 IHA-105 IHA-201 IHA-202 IHA-203 IHA-204 IHA-205 IHA-301 IHA-302 IHA-303 IHA-304 IHA-305 IHA-501 IHA-502 IHA-503 IHA-504 IHA-505 A (MAX.) 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.550 [13.97] 0.550 [13.97] 0.500 [12.70] 0.500 [12.70] 0.500 [12.70] 0.600 [15.24] 0.750 [19.05] 0.475 [12.07] 0.475 [12.07] 0.550 [13.97] 0.550 [13.97] 0.550 [13.97] 0.475 [12.07] 0.475 [12.07] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] B (MAX.) 0.800 [20.32] 0.800 [20.32] 1.050 [26.67] 1.050 [26.67] 1.175 [29.85] 0.800 [20.32] 0.800 [20.32] 0.920 [23.37] 0.920 [23.37] 1.050 [26.67] 0.800 [20.32] 0.920 [23.37] 0.800 [20.32] 0.920 [23.37] 1.175 [29.85] 1.050 [26.67] 1.050 [26.67] 1.050 [26.67] 1.050 [26.67] 1.300 [33.02] C ± 0.002 [0.050] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.032 [0.813] 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] STANDARD ELECTRICAL SPECIFICATIONS MODEL IHA-101 IHA-102 IHA-103 IHA-104 IHA-105 Revision: 07-Aug-12 IND. AT 1 kHz (μH) 50 100 250 500 1000 TOL. (%) ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % DCR MAX. () 0.120 0.160 0.280 0.420 0.600 RATED DC CURRENT (mA) 2500 2100 1800 1600 1400 Document Number: 34014 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHA www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MODEL IHA-201 IHA-202 IHA-203 IHA-204 IHA-205 IHA-301 IHA-302 IHA-303 IHA-304 IHA-305 IHA-501 IHA-502 IHA-503 IHA-504 IHA-505 IND. AT 1 kHz (μH) 27 50 100 250 500 5 10 27 50 100 5 10 27 50 100 TOL. (%) ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % DCR MAX. () 0.060 0.085 0.120 0.200 0.320 0.015 0.021 0.040 0.050 0.070 0.010 0.015 0.030 0.040 0.060 RATED DC CURRENT (mA) 3700 3100 2700 2400 2300 6800 6100 4800 4300 4200 9300 8300 6500 6100 5900 MARKING - Vishay Dale - Model - Date code ORDERING INFORMATION IHA-101 50 μH ± 10 % EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H A 1 MODEL Revision: 07-Aug-12 0 1 E B PACKAGE CODE Document Number: 34014 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000